Lincoln Engineering Work Station

[912Targa]

I've learned a lot in the past few days. Let me add this to the permanent record.

Lincoln Engineering Model 2765 workstations use a 7mm socket for the screws. A 1/4 inch nut driver is too small and 5/16 is too big.

Anyone want to guess which size wrench socket i did NOT have the other day while trying to partially disassemble the service merchandiser?

 

[JR 42]

I've learned a lot in the past few days. Let me add this to the permanent record.

Lincoln Engineering Model 2765 workstations use a 7mm socket for the screws. A 1/4 inch nut driver is too small and 5/16 is too big.

Anyone want to guess which size wrench socket i did NOT have the other day while trying to partially disassemble the service merchandiser?

9/32"? Sweet setup!

 

[wrenchguy]

Is that original finish!!!!?????

 

[912Targa]

It looks like it.

 

[Roberts210]

What kind of vise is that in the first picture?

 

[TailGunner3000]

Looks like it could be a Parker 83 1/2.

 

[930dreamer]

I should have kept mine.

 

[83VillageRepair]

Hey I have one just like that except the finish isn't as nice

 

[912Targa]

The vice is marked M V #4. it's got a cool Deco tail.

 

[thehorse13]

I don't care what you paid for this merchandiser. You ****.

Also, you should send it to me for safe keeping.

Fantastic find.