What is a decent price to pay for a a lista workbench with a 6 drawer cabinet? The cabinets drawers all work the whole unit could use a repaint no lock that doesn’t matter. The bench top is steel with the three sides turned up.
Lista workbench
- Thread starter plout99
- Start date
PCMusicGuy
Well-known member
Re: Lists workbench
Really depends on condition but when similar is for sell down here that would be between $300 and $500.
Really depends on condition but when similar is for sell down here that would be between $300 and $500.
Re: Lists workbench
So I bought the lista work station, cost $160 so that seems reasonable to me for a 5 foot steel topped workbench and 6 drawer cabinet. I didn’t realize how heavy the things are must be 300 to 400 lb. Just need to decide on a paint color it’s usable as is but now is the time to clean it up. Are the clear drawer handle strips available somewhere?
So I bought the lista work station, cost $160 so that seems reasonable to me for a 5 foot steel topped workbench and 6 drawer cabinet. I didn’t realize how heavy the things are must be 300 to 400 lb. Just need to decide on a paint color it’s usable as is but now is the time to clean it up. Are the clear drawer handle strips available somewhere?
Attachments
coljar
Well-known member
Re: Lists workbench
You got a very good deal in my opinion. A little elbow grease and paint and you'll have one fine bench.
You got a very good deal in my opinion. A little elbow grease and paint and you'll have one fine bench.
fourjeepin
Well-known member
Re: Lists workbench
+1. Looks bad, but that will clean up very nicely with a coat of paint
+1. Looks bad, but that will clean up very nicely with a coat of paint
toolchaser
Well-known member
Good deal, $100 per drawer is about the average for used LIsta / Vidmar/style cabinets
Jayman17
Well-known member
Very good price and that will clean-up very nice. Please post some pics when done. I like that for a workbench....
Jay
Jay
kngelv
Well-known member
Great price. I had a similar one that had a pegboard wall integrated in it. I never liked the top though. It’s just thin galvanized over 2x6’s. A butcher block top would be ideal.
James
James
Darby9
Well-known member
I paid $700 for this six drawer w/butcher block top. Pretty mint condition, other than 4 3/8" holes in the top where they had a tensile test machine mounted. People over pay for Lista and Vidmar at auctions around here--I've seen them go for $1000+
Imagine how much they overpay when they buy them new.
wolfhawk73
Well-known member
PCMusicGuy
Well-known member
Great price. Lista parts are usually available. If you are needing parts, reach out to AmericanWorkspace and see if they can help.
Sweetcorn
Well-known member
Re: Lists workbench
I agree. I would have bought that without any hesitation at that price, and I don't even need it.
I agree. I would have bought that without any hesitation at that price, and I don't even need it.
Thanks for the info
The only thing that is nasty is the plastic overlay on the handles. Just not sure if I will replace them or not
Amen to that.
I hope all think SO boxes are way way way way way over-priced then. I paid $50 a drawer freight from Tx to Ca. My next box will probably be a General if new and ? if used.