Long reach undercoat gun?

[bb_max]

Does anyone have something (homemade or purchased) that is a sort of long reach paint spray gun?

I am trying to figure out how to apply POR15 (thick paint) to the inside boxsides of my pickup (between the outer skin and the inside of the bed). The best way to reach this area is by taking the taillight out and reaching through the back, but that is about a 3-4' reach through a 3-4" hole.

Not looking for a quality spray job, just something to slobber some paint in there.

Any ideas are welcome. Thanks.

 

[cooljoe57]

Maybe a pressure washer spray gun/lance? They do offer diffrent spray tips for them.

 

[countryroad82]

Rig something like this up to your gun, or use a shutz gun to spray it. http://www.nationaltoolwarehouse.co...zmap=RUS5061&gclid=CJOQ8um7-swCFdgYgQodFy0Baw

 

[LXCam]

Eastwoods has a cheap kit with a flex line and a nozzle that sprays a 360 degree pattern for just this need.

Hopefully I copied the link correctly. If not search frame coating.

http://www.eastwood.com/internal-frame-coating-w-spray-nozzle-qt.html

 

[jimgood]

Airless sprayers have long tip extensions.

http://www.homedepot.com/b/Paint-Paint-Sprayers-Paint-Sprayer-Accessories/N-5yc1vZarthZ25ecod

 

[Capt Chrysler]

Don't get it to thick or it will solvent pop and crack. I have a car in the shop now that has POR 15 on it and it is headed to the blasters to get removed.

My luck with Por 15 and Chassis Saver. 1 Great, 4 to the blaster. On the 4 bad, I coated 2, was involved in one, the last one showed up at the shop after being pulled from another shop.

Good luck, keep us posted!!

Capt. Chrysler