looking for a 12pt Metric crows feet--

[purpony]

Wondering if anyone can help me out.......

I am in search of a 18mm 12pt crows foot or a set.

anyone know who makes this(theses) and where to get them?

I need to get a power steering line off and this is the best tool to get in there.

thanks

 

[Mr.Nutcase]

Wondering if anyone can help me out.......

I am in search of a 18mm 12pt crows foot or a set.

anyone know who makes this(theses) and where to get them?

I need to get a power steering line off and this is the best tool to get in there.

thanks

Flare nut> http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=2184&group_ID=266&store=&dir=catalog
I found that they carry some sizes but no 12pt

 

[mrshaun]

if someone had an old anm18 that would work same as anm17
that would be the only thing I can see
what vehicle is the line on?

 

[hischj]

proto makes 12pt. crowsfeet. Not sure about the sizes, I would have to look.

 

[posaune]

proto makes 12pt. crowsfeet. Not sure about the sizes, I would have to look.

As far as I can tell, the only 12pt ones are SAE.

 

[Moose-LandTran]

Moose comes through with the win!

http://cgi.ebay.co.uk/Britool-3/8"-...vr_id=&cguid=f47b619e1270a0e205427442fe2dfa58

I've bought from that seller before, he was very helpful.

 

[purpony]

thanks for the link moose.. but the walls may be a little thick.

I have SAE thin wall 12pts... this is on the pressure side on a ford explorer. To get a wrench on this one, i needed to take off the 2 other lines above it, and then there is one next to it that i cant get free.. the head is starting to round.

 

[Moose-LandTran]

That one in the pic appears to be a 13mm or so. Make the wall thickness look disproportionate.

 

[garfunkle24]

I think you'd have better luck building one from a line wrench.