Looking for a $200 welder from Amazon

[the5]

Hey guys looking at picking up a 120v Welder from Amazon for about $200 Tonight. I need it by Tuesday so it has to be prime or I go with a Harbor Freight one.
Here are the 4 I found

http://www.amazon.com/gp/product/B003XFKKE0/?tag=atomicindus08-20

http://www.amazon.com/gp/product/B016R0FCSQ/?tag=atomicindus08-20

http://www.amazon.com/gp/product/B001RIZ7SE/?tag=atomicindus08-20

http://www.amazon.com/gp/product/B003FGWZK4/?tag=atomicindus08-20

Anyone have any experience with any of these? Or experience with any others?

 

[CNGsaves]

^ ^ ^ NONE of the above.

Raise your budget and get Hobart 140 at Tractor Supply for $499
http://www.tractorsupply.com/tsc/product/hobart-handler-140-mig-welder?cm_vc=-10005

 

[the5]

Im not welding anything truly Weight bearing, Just making a few custom brackets for a race car. Just trying to pick up a mobile welder that i could take to the track with me and will pick up a real one when i get more serious.

 

[WhiffySpark]

Tractor supply has two under 200 I've been looking at for the same reason you stated. I feel like it's a step above the HF unit

Btw, be prepared for the you need 220v buy an old machine off craigslist crowd chiming in 3...2...1..

 

[firworks]

I got my girlfriend's sister this Campbell-Hausfield welder for Christmas:
http://www.menards.com/main/tools-h...426149375-c-10163.htm?tid=6592907604052698996

When we took it out to look at it it did seem nicer than my HF 89$ special. I liked that it had 4 power settings with a thickness reference in comparison to mine having "HIGH or LOW" or "No Penetration" or "Blast right through". I don't know if she's used it yet though or how well it works. She was sick the day after Christmas when she was going to bust it out and I haven't talked to them much since.

Speaking only on build quality though that one's nicer than the cheapest HF flux-core.

 

[JJThrasher]

Port A Torch and learn to oxy fuel weld? Small torches are cheap and easy to move.

 

[zendriver]

Not used them, but they are probably capable of getting the job done.

I have a Lincoln Weld Pak 100 (purchased used from ebay), that ive used a couple times, It welds good, probably wonderful, for people who really know how to weld.

Not too much more money, for a Lincoln.

http://www.homedepot.com/p/Lincoln-Electric-Weld-Pack-HD-Feed-Welder-K2188-1/100031840

 

[the5]

Not used them, but they are probably capable of getting the job done.

I have a Lincoln Weld Pak 110 (purchased used from ebay), that ive used a couple times, It welds good, probably wonderful, for people who really know how to weld.

Not too much more money, for a Lincoln.

http://www.homedepot.com/p/Lincoln-Electric-Weld-Pack-HD-Feed-Welder-K2188-1/100031840

How do you like it? I would be willing to step up to that since it is a quality name.