Looking for a super-short torx socket set - any suggestions?

[quattroJoe]

Not long ago I purchased a set of OTC XZN/triple square sockets after seeing them here on the forums. They are advertised as "super-short" and have hex bolsters so they can be used with a wrench to obtain additional clearance over a ratchet.

https://www.amazon.com/gp/aw/d/B00J...1469829100&sr=1&pi=AC_SX236_SY340_FMwebp_QL65

I do quite a bit of work on German cars and could really use a set of torx sockets like this. I just ran into an issue trying to remove a fan assembly from an Audi where one of the torx bolts securing it was directly in front of an AC hard line with only an inch or so of clearance. Could've saved me a lot of time and frustration.

So has anyone seen a similar torx set? OTC doesn't list one, and I couldn't find anything doing a general search.

 

[jeejay]

Maybe VIM tools, I got a stubby screwdriver socket set from them (20mm in length, or about 35mm on a drive).

 

[logikal]

I have a set of stahlwille serving me strong for 15 years, they are known as stubby torx. everyone makes them, blue point, gearwrench, lisle matco....

 

[T45]

Hazet, Stahlwille, or VIM

propably in that order

 

[T45]

If you want low profile bits (not sockets) look at snap on lo-profile

PB swiss 110degree stubby torx keys

might be even better for some applications, YMMV

 

[jfcasey]

I have a stubby set of snap on torx that look about the same size as those xzn bits.

 

[LXCam]

What the largest size you're looking for. GW makes a set that is a 1/4" hex drive type that comes with a holder made for a 13mm wrench. I have that kit and use the **** out of it. I'll hop on a real puter and find a link for ya.

Heck, wasn't all that hard to find

http://www.walmart.com/ip/Kd-Tools-...62769&wl11=online&wl12=40453456&wl13=&veh=sem

 

[Mohawk Dave]

VIM Tools HCT1050 10-Piece Half-Cut Torx Driver Set https://www.amazon.com/dp/B000VUM6BU/?tag=atomicindus08-20

 

[Fedwrench]

Here is a set from gearwrench but, I don't think anyone makes them with the hex base like your OTC set.

http://www.tooltopia.com/gearwrench-81196.aspx

However if space is an issue, you might be better off with a bit ratchet set. Something using the 1/4 stick as the drive platform.

 

[DieselSaves]

This set is for sale right now in a Napa flyer. It has the hex drive you're after.

http://www.tooltopia.com/e-z-red-t1000.aspx

 

[banditbigdog]

I purchased / used this set for several years and would recommend.
Made in USA as well.
Purchased my set from MSC way back when.(20+ years)
Unfortunately it appears MSC does not sell this set with the torx drivers.

Looking online the company in the link below does sell the set with torx drivers and their price is lower than others.
Never ordered from them however.

http://www.specialized.net/Speciali...ini-Ratchet--Screwdriver-Set-4-52Pc-9926.aspx

 

[bob15]

Another option that eliminates the thickness of the ratchet is using Chapman Bits. These work real well in tight places:

http://chapmanmfg.com/collections/all

 

[dede2897234]

This set is for sale right now in a Napa flyer. It has the hex drive you're after.

http://www.tooltopia.com/e-z-red-t1000.aspx

DieselSaves,

I don't see the EZ-Red set on this current quarter NAPA RealDeals flyer?

What page is it on in the flyer? I might have missed seeing it.


Thanks,

Dave

 

[knobby]

Titan tools sells a decent quality set for a fair price.

 

[unslow1]

DieselSaves,

I don't see the EZ-Red set on this current quarter NAPA RealDeals flyer?

What page is it on in the flyer? I might have missed seeing it.


Thanks,

Dave

I can't find it either.

 

[DieselSaves]

DieselSaves,

I don't see the EZ-Red set on this current quarter NAPA RealDeals flyer?

What page is it on in the flyer? I might have missed seeing it.


Thanks,

Dave

Sorry about that. It's in a Techs Edge flyer my Indy tool guy gave me. I had them sitting together on the bench at the shop.