longlivepunk
Well-known member
Alright, I've been doing my electrical for a couple months now, with many MANY hassles and delays, but I'm almost done now except I have 1 more stupid issue (hopefully the last)
I'm using a few feet of coated teck-style conduit to run my conductors between the meter base and the panel, and have 2 90 degree connectors to connect to the panel and meter base kind of like the one pictured below.
the issue is that because the meter base is on the other side of the outer-wall sheeting, and the panel is on the other side of the 3/4" plywood it's mounted on, the threaded portions of those connectors don't quite reach the inside of the box! Is there any kind of extension that I can get that will have female threads to thread onto those connectors and then have a male-threaded portion for the lockring?
Thanks in advance, guys!!
I'm using a few feet of coated teck-style conduit to run my conductors between the meter base and the panel, and have 2 90 degree connectors to connect to the panel and meter base kind of like the one pictured below.
the issue is that because the meter base is on the other side of the outer-wall sheeting, and the panel is on the other side of the 3/4" plywood it's mounted on, the threaded portions of those connectors don't quite reach the inside of the box! Is there any kind of extension that I can get that will have female threads to thread onto those connectors and then have a male-threaded portion for the lockring?
Thanks in advance, guys!!
Thanks a lot pattenp, Clearly I need a beer and a break from electrical.