looking for drawer slides for custom pull out peg boards

[ryze33]

I am in the process of building of building a pit cart tool box to accommodate our race car adventure.
https://scontent-ort2-1.**.fbcdn.net/v/t1.0-9/32974698_10160539731795595_6248611613868294144_n.jpg?_nc_cat=0&_nc_eui2=AeHNAcP8_VI3bl3Qdv3V8B3R5Ahl3J_yzo8ipQHWTLvuy5euKxzbvHlAYwEB0FIz0fYVyQ1SqFCfwrk0D-sY0U621aChZzA4km6lp0svCmqlEw&oh=1c2dc3608a738c8fbaf34d5b09e77283&oe=5B7A4B34
https://scontent-ort2-1.**.fbcdn.net/v/t1.0-9/30739611_10160415378830595_3991093132832800768_n.jpg?_nc_cat=0&_nc_eui2=AeGO9m4xpS-_DZAzPkzWT5nkvF1ZOoiKLac380Dl_POUPV1CkWMSg3qy4JyYuDuh-W7YjtcYhjvYvqEoA5qrxIvHkoKGZOTnhxI16f_S0mHfCA&oh=099c7400ad126d8d1edbda9c7b83c669&oe=5B84781E
and on one side cabinet I want to have 3-4 pull out pegboards. But i can't seem to find correct slides for the application (slides would need to be on the top and bottom of the pegboard)
similar to snap-on's side cabinet with pull out pegboards.
does anyone have any suggestions?

 

[rsanter]

I have some new full extension accuride drawer slides
24”

 

[dfiler2]

You could attach the slides to some light weight angle iron and leave the slides oriented the way they normally are.

 

[ryze33]

I have some new full extension accuride drawer slides
24”

Thanks, 24" is too long. need 16"

You could attach the slides to some light weight angle iron and leave the slides oriented the way they normally are.

I did not think of that.. it makes sense and probably be easier to do. Thanks

 

[Craig Balzer]

ryze33

These guys make pull out pegboards but a much larger scale than you need. Making your design (or recommending parts) at a much smaller scale ought to be a snap (no affiliation):
http://www.southwestsolutions.com/i...rts-storage-rack-steel-pegboard-cabinet-shelf

Also, this youtube video seems to echo idea the angle-iron from dfiler2: