Looking for MAC toolbox Locks help

[jimforbes]

Looking to find a replacement lock for my MAC toolbox for a rebuild/restore of my old box from the 90’s. Everywhere I look has the more basic style locking cylinders but the one I have is a little different. Any help in identifying it or a replacement part number etc. is appreciated.

 

[DGersic]

Destroy the old cylinder to remove the locking cam that appears to be swedged in place. Install cam on new lock cylinder that’s the right depth for the box.

 

[jimforbes]

Actually the lock came out easily and I can remove the entire cylinder from it was hoping to find a new cylinder so that I can actually lock it. Wasn’t trying to modify it if I didn’t have to.

 

[DGersic]

Actually the lock came out easily and I can remove the entire cylinder from it was hoping to find a new cylinder so that I can actually lock it. Wasn’t trying to modify it if I didn’t have to.

You might identify the manufacturer, but it’s not likely.

If there is a key code stamped on the front, you can buy a key to match. If not, a real locksmith can decode it and cut one.

What I was suggesting will be faster, and likely cheaper. Cut here (red)



Then remove the cam (blue). Buy a new lock with keys. You’ll need to measure the depth from the back of the face plate to the end of the core. Match that when buying the replacement.

 

[The Cobbler]

If the lock is complete, a real locksmith, or even a lot of people with basic lock skills can make you a new key.
but,
if you're paying for labour a new lock is probably the cheapest way out. I also agree with the others have indicated what you need to do for that

 

[BillK]

Looking to find a replacement lock for my MAC toolbox for a rebuild/restore of my old box from the 90’s.

I guess I have to ask . . . . did you call Mac and ask them ?

 

[Motown]

Their are keys on Ebay , look for the code on the lock. I bought a couple, worked perfect.

 

[GrayFlattop]

Try Easykeys.com if there is a legible code number stamped on the front of the lock. It worked for me.

I picked that up from the "vintage toolbox" mega-thread here. 385 pages long - I think I'm up to about page 250 reading it in chronological order - a few pages at a time.