Loose heads on air ratchets.

[2ndGearRubber]

The unit in question is and SP air impacting air ratchet, but I've had the issue before with various tools.

What's the best method to get these things straightened out and tight? And keep them tight? It seems as soon as this happens I'm never able to keep them tight for the remainder if their service lives. Normally I mount the base in the vise and crank the collar down with some Knipex. Is blue locktite the best solution here or am I missing something?

 

[Wrench97]

I've used both blue and red it keeps it from happening for a longer period but they always seem to loosen up again.

 

[Walkers]

I have had the same problem, mostly it has been mitigated by the switch to battery ratchets.

 

[kudakev615]

I have had the same problem, mostly it has been mitigated by the switch to battery ratchets.

what battery powered impacting ratchet are you currently using?

 

[2ndGearRubber]

I put some blue locktite on it. Pliers wrench was excellent for this.

 

[Walkers]

what battery powered impacting ratchet are you currently using?

Either using an impact or a ratchet.

 

[2ndGearRubber]

I do not believe any brand sells an electric impacting air ratchet, FWIW.

 

[Snapped-off]

Is blue locktite the best solution here or am I missing something?

Purple or blue should work. Have you tried it in the past?