Lots of Sockets WANTED

[Bull]

I have a lot of gaps from my socket organizers that I want to address. The list is long. Ideally, I'd like to get as many as possible from one source so I don't end up sending out dozens of Paypal payments for a few here, a few there. Let me know what you have

Metric 1/2 6 point: 9,12-14,16,18-27 mm

Metric 1/2 12 point: 9, 12, 16, 25, 26, 28, 29, 36

Standard 1/2 6 point: 3/8, 19/32, 21/32, 25/32, 1 1/2

Standard 1/2 12 point: 3/8, 21/32

Metric 3/8 6 point: 6, 20, 22

Metric 3/8 12 point: 6-8, 20-22

Standard 3/8 6 point: 15/16, 1

Standard 3/8 12 point: 15/16, 1

Standard 1/4 12 point: 1/4, 9/32, 9/16

Thanks for looking!

 

[Bull]

I forgot to note, ALL of the sockets above are shallow. I'll deal with the deep ones later!

 

[Snappy]

Do you want any particular brand ? I found a 3/8 dr, 12pt, 9/16 , Craftsman , (older w/v-code ). I'll look for more tomorrow.
Scott

 

[Delray]

I have a lot of extra Craftsmans. If I can find enough to make it worth while to ship I will send a PM later this afternoon. Did you get that pipe installed?

 

[Blacknwhitepit]

Here is what I have (In red) : Offering for $16 Shipped


Metric 1/2 6 point: 9-27 mm (14mm Craftsman) (yeah, I'm missing that many!)

Metric 1/2 12 point: 9, 10, 11, 12, 13, 16, 18, 20, 23, 24, 25, 26, 28, 29, 36

Standard 1/2 6 point: 3/8, 9/16, 19/32, 5/8, 21/32, 11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4, 1 1/2

Standard 1/2 12 point: 3/8, 19/32, 21/32, 25/32, 1 1/8, 1 3/16, 1 1/4

Metric 3/8 6 point: 6, 7, 20, 22

Metric 3/8 12 point: 6-8, 20-22

Standard 3/8 6 point: 1/4, 7/8, 15/16, 1

Standard 3/8 12 point: 1/4, 9/16, 15/16, 1

Metric 1/4 6 point: 8, 9
Metric 1/4 12 point: 9/16

Standard 1/4 12 point: 1/4, 9/32, 9/16


Here they are total. All are Made in USA

TOP 14mm 1/2 drive, 6pt Craftsman

10mm 1/2 drive 12pt Williams, 13mm 1/2 drive 12pt WILDE, 20mm 1/2 drive 12pt WILDE, 23mm 1/2 drive 12pt WILDE

9/16 1/2 drive 6pt THOR, 5/8 1/2 drive 6pt THOR, 11/16 1/2 drive 6pt Craftsman, 3/4 1/2 drive 6pt WIZARD

3/8 1/2 Drive (8 POINT) Williams, 19/32 1/2 Drive 12 point Wizard, 25/32 1/2 drive 12 Point Giller, 1 1/8 1/2 Drive 12 point HUSKY

1/4 1/4 drive 6pt KOBALT (Williams Make), 9/16 1/4 drive 12 pt Craftsman

8 and 9 mm 1/4 drive 6pt Craftsman.

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[Bull]

Blacknwhitepit, PM sent.

Rickster, how much for that lot? Let me see if I can finalize w/Blacknwhite, then compare your list to what I would still need after that.

 

[Bull]

Blacknwhite has filled in some of the gaps. I updated my original post...still a lot missing.

 

[rsanter]

boney
1/2 12 pt 1 1/4

Cman
1/2 drive
12pt 11/16
6pt 13/16

3/8 drive
12 pt 9/16

1/4 drive
6 pt 9/32


bob

 

[Delray]

Sorry only found a couple - not enough to justify shipping.

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[Bull]

Rick, I'm sure that is a fair price when SO is included. But, it reminds me why I don't have SO tools...just too rich for my poor blood.

Bob, let me compare your list with my remaining needs. Price?

 

[Snappy]

I have a Craftsman 9/16 , 3/8 dr , 12 pt
& a Craftsman 15/16 , 1/2 dr , 6pt
$5.00 shipped
I'll try to upload a pic if you are interested

 

[eddyyy302]

I will have time tonight to go through sockets for you and should have most if not all of what you are missing, Is the list current as to what you need? Let me know and I will go through what I have.
Dan

 

[Bull]

Snappy, that price is reasonable, but it is more cost effective for me to buy larger lots.

eddyyy, I edited the list after buying fifteen sockets from another member yesterday, so yes, what is listed above is 100% current as to my needs for shallow sockets right now.

Just as a reminder, I think it is best for me to avoid Snap On stuff, since it just maintains its value too much and I am perfectly happy with other US made brands.

 

[64merc]

I think I may have most of these except for the 32nds:

Standard 1/2 6 point: 3/8, 19/32, 21/32, 25/32, 13/16, 7/8, 15/16, 1, 1 1/16, 1 1/8, 1 3/16, 1 1/4, 1 1/2

I'll look and see what I have tonight. I only have one of the 3/8 so I'm keeping it. It is a pain to find used.

 

[Bull]

Ok, keep me posted. Depending on prices and who has what, maybe tonight will be a big night for sockets for me!

 

[Rickster]

http://www.garagejournal.com/forum/showthread.php?t=109721

 

[eddyyy302]

And so far I can fill these gaps:
Standard 1/4 12 point: 1/4, 9/32 Both Craftsman
1/2 drive 12 pt Metric 18 mm Craftsman
1/2 Drive 6 pt 25/32 Walden Wooster and 1 1/16 No name

I am sure that I should have some more although many that you have left are hard to find or odd sizes, but I will have to go through some more boxes!

 

[Bull]

Dan, what is the price for those, and is there any way of telling if the no name is US made or foreign?

 

[eddyyy302]

Wait a minute we aren't done yet, I have more, can you fix the metrc 1/4 that you need? It currently says 9/16. Let me know and I will let you know the others that I have.

Dan

 

[Bull]

Hi Dan,

I thought that what you listed was your whole shebang...guess I jumped the gun

damn, I hadn't noticed that 1/4 metric mistake. let me run to the barn and see what the real deal is. BRB.

 

[Bull]

It would appear that I do not need any 1/4 metric. I needed two 6 point metric, but bought them yesterday. So now for 1/4 drive I just need the three 12 pt standard sizes listed ( 1/4, 9/32, 9/16.)

 

[eddyyy302]

ok,
So I also have the 1/2 drive 12 pt, 24 mm in Craftsman, and I will have to check on a few others, let me get back to you with a full list, price and picture tomorrow night, tonight is a little busy!
Dan

 

[Bull]

Dan, sounds good. Also sending you a PM.

 

[eddyyy302]

OK,
I absolutely have to have more of these, but here is what I was able to come up with.
1/4 12 pt shallow 1/4 Craftsman
1/2 12 pt shallow 18mm and 24 mm both Craftsman
1/2 6 pt shallow 25/32 Walden Worcester and 1 1/16 no name

Maybe some deeps to offset the cost of shipping?

3/8 drive deep 6 pt. 5/8 and 13/16 both SK wayne
3/8 drive deep 12 pt. 7/8 Williams
1/2 drive deep 6 pt. 5/8 Craftsman brand new, 3/4 MAC, 7/8 Craftsman Brand New
1/2 drive deep 12 pt 1/2 husky, 9/16 craftsman, 5/8 SK Brand New, 11/16 SK Brand New, 3/4 Craftsman, 13/16 Challenger, 7/8 Craftsman, 1" Herbrand


Pics to come!

 

[eddyyy302]

If you need any better pics or clarification let me know, I know they aren't the best!

 

[Bull]

What's the price for that, Dan? Looks like I'll still have a lot of sockets to find!

 

[eddyyy302]

PM Sent!
Thanks,
Dan

 

[Bull]

Replied!

 

[Bull]

Updated the list again: added 9/16, 5/8 and 3/4 back to the 1/2 drive standard 6pt section and 14 mm to the 1/2 drive metric 6 pt section.

 

[eddyyy302]

So far I have the 9/16 in SK, I am looking for the rest.
Dan

 

[Bull]

List updated again, to reflect a large number of 1/2 standard 6 pt that I just bought from 64Merc

 

[Bull]

Bump, just in case anything new has surfaced.

 

[petty4243]

are you still missing the sockets on the list below? if so i might have several(will have to go through them



Metric 1/2 6 point: 9-27 mm (yeah, I'm missing that many!)

Metric 1/2 12 point: 9, 11, 12, 16, 18, 24-26, 28, 29, 36

Standard 1/2 6 point: 3/8, 19/32, 21/32, 25/32, 1 1/2

Standard 1/2 12 point: 3/8, 21/32, 1 3/16, 1 1/4

Metric 3/8 6 point: 6, 7, 20, 22

Metric 3/8 12 point: 6-8, 20-22

Standard 3/8 6 point: 7/8, 15/16, 1

Standard 3/8 12 point: 1/4, 15/16, 1

Standard 1/4 12 point: 1/4, 9/32, 9/16

 

[Bull]

Yes, that list is still 100% accurate. I am missing all of those.

 

[petty4243]

I will pull out my boxes and see what I have...

 

[UK Steve]

I have a lot of gaps from my socket organizers that I want to address. The list is long. Ideally, I'd like to get as many as possible from one source so I don't end up sending out dozens of Paypal payments for a few here, a few there. Let me know what you have

Metric 1/2 6 point: 9-27 mm (yeah, I'm missing that many!)

Metric 1/2 12 point: 9, 11, 12, 16, 18, 24-26, 28, 29, 36

Standard 1/2 6 point: 3/8, 19/32, 21/32, 25/32, 1 1/2

Standard 1/2 12 point: 3/8, 21/32, 1 3/16, 1 1/4

Metric 3/8 6 point: 6, 7, 20, 22

Metric 3/8 12 point: 6-8, 20-22

Standard 3/8 6 point: 7/8, 15/16, 1

Standard 3/8 12 point: 1/4, 15/16, 1

Standard 1/4 12 point: 1/4, 9/32, 9/16

Thanks for looking!

Hi Ko-ken can supply all these sockets in shallow or deep no problems.....

 

[Bull]

Hi Ko-ken can supply all these sockets in shallow or deep no problems.....

You mean the Japanese company?

Sure, any company could supply them, even Craftsman. I'm hoping to piece them together on the cheap from people here who have extra used sockets. They seem to sell for about $1 a piece for Craftsman and comparable quality.

 

[Scooterfish]

Bull, just a thought I bought some of the Craftsman old style (non etched )3/8 & 1/2 dr std & deep sockets on the C man 1/2 off sale for an average of about 2.25 each shipped to my door. There is a coupon for $5 off over $50 order that makes shipping 1.25. If you find 5 sockets here and there for $1 plus $5 shipping your at $2 each. More info in the Cman days in general tool section.