Lowe's Clearance Thread 2014

[elronin]

Word? This is the new tool-less chuck model, right? Looks like I need to hit up Lowe's tomorrow, been wanting one of these. Do you have the SKU on the one you got for $49?

No sorry but it has to be a 4200 6/40 model which means the kit has 6 accessories and 40 piece set. I think the new one doesn't have the handle attachment

 

[hachi-roku_fan]

Found these for 4.97

http://img.photobucket.com/albums/v726/drifting_roku/20044043-E077-44F1-B489-2E4EFD6DEB17.jpg

And this shop vac for 39.99

http://img.photobucket.com/albums/v726/drifting_roku/D25F08E8-B860-47B9-9A15-35E3B3E3D515.jpg

 

[Mk3Mike]

Picked this set up at my local Lowes yesterday. Reg price was $199 iirc, on sale for $129. Not a screaming deal but I've been looking for something to replace my 12v HF impact.

Haven't tested it out yet, but I did notice the batteries charge nice and quick!

 

[IMCA38]

Was in last week and picked up the two piece multi cutters for $4.98 and the screwdriver/knife set for $3.52. The big screwdrivers and knife are made in USA and made in USA of global parts. Stubbies are made in Chi-com.
Got all of these to carry in a toolbag in the back of my work vehicle. Therefore, cheap is fine.

 

[rice rocket]

I've had that Stanley set for almost 5 years now, it's actually pretty decent. Way better than the Craftsman US made ones I have.

 

[kenped86]

Screwdrivers were $1.25 here in zip code 72120. Thanks

 

[JEdA]

Screwdrivers were $1.25 here in zip code 72120. Thanks

I didn't expect to see my zip code here, but hello neighbor.

 

[Hitchedup21]

Picked up a Dremel 4200 with starter kit orig price $129.99 down to $49.00
and a Porter Cable 6" polishing wheel orig price $6.98 down to $1.13

Used a $10.00 off $50 code to get the the Dremel for $39.22 and the wheel for $.90

 

[AnthonyJ124]

Just bought the Stanley screwdriver and knife combo from my closest store online... Last one available. Let's hope it's actually there!

EDIT scratch that. Sold out, order cancelled. Shucks.

 

[bigboost]

Just bought the Stanley screwdriver and knife combo from my closest store online... Last one available. Let's hope it's actually there!

EDIT scratch that. Sold out, order cancelled. Shucks.

Funny, all of my local stores that are OOS , show $3.62 for them, the one store that has 6 sets of them....$7.55, wth.

 

[jonathan75]

Picked this up for only $2! This is going to be great for me. I always have to remove screws at work and hate setting them down on something.

 

[zeekh]

Picked this up for only $2! This is going to be great for me. I always have to remove screws at work and hate setting them down on something.

ITs easy to brush against something and loose the screws.

 

[fourjeepin]

ITs easy to brush against something and loose the screws.

That's why it's only $2!

 

[928'er]

Picked this up for only $2! This is going to be great for me. I always have to remove screws at work and hate setting them down on something.

Keep it away from your credit cards....

 

[mrvm]

Utility belt magneto? Could be useful up a ladder for a couple nails but not for the hammer

 

[thewatusi]

Probably doesn't work with attracting women either.

 

[msgross]

Picked this up for only $2! This is going to be great for me. I always have to remove screws at work and hate setting them down on something.

Wear it on the front like a belt buckle!

 

[quattroJoe]

There's one Dremel 4200 @ $49.00 left at the store in Orange Park FL as of 8:00 tonight. Last one in the Jacksonville area. I snagged two, one for myself and one to offer up to a couple of buddies. If no one takes me up I'll put it in the classifieds at cost.

P.S. the SKU on the clearanced Dremel kit is 407078. I asked at the service desk to check if any stores in town had it since it's gone from the website.

 

[jonathan75]

Probably doesn't work with attracting women either.

****, that is why I got it too. I know the ladies can't resist geek wear.

 

[OneWheelWonder]

Found bench grinder porter cable polishing compound on sale for .30 to .60 cents a stick. 4" polishing wheels were 1 buck originally 5 bucks. I'd post a pic but my phone won't let me.

 

[flying eyeball]

item numbers really help, people.

 

[Hitchedup21]

Went to the local Lowes last night and didn’t do too bad I think.
Here is what the wife and I ended up with…
365700 Dyson Digital Slim DC35 Vacuum Reg. $250+ (depending on where you look) paid $150
293649 All-purpose cleaner Reg. $2.97 Paid $0.89
100940 Toilet cleaner Reg. $3.98 Paid $1.34
159629 Invisible glass cleaner Reg. $3.98 Paid $1.00
250912 Latex Gloves Reg. $2.97 Paid $0.79
264046 Belt for work pouch Reg. $5.48 Paid $2.00
351958 Drill Holster Reg. $9.98 Paid $2.50
216952 Bucket Parts Stacker Reg. $3.88 Paid $1.00
242528 Leather Chamois Reg. $8.98 Paid $2.00
242532 Microfiber Polishing Towel Reg. $3.98 Paid $1.00
21441 Hack Saw Blades Reg. $3.48 Paid $0.50
118699 Jigsaw Blades Reg. $5.17 Paid $1.00
241918 Scratch X Reg. $9.97 Paid $2.00
117946 Dewalt Palm Sander Reg. $79.97 Paid $30.00

 

[erty67]

Just stocked up on Dirty Jobs cleaners. $.74 - $1.12

 

[duganrm]

There's one Dremel 4200 @ $49.00 left at the store in Orange Park FL as of 8:00 tonight. Last one in the Jacksonville area. I snagged two, one for myself and one to offer up to a couple of buddies. If no one takes me up I'll put it in the classifieds at cost.

P.S. the SKU on the clearanced Dremel kit is 407078. I asked at the service desk to check if any stores in town had it since it's gone from the website.

I will be near a Lowe's tomorrow night so I will see if they have this in stock anywhere in the area. I could use a Dremel and that is a good price.

Really wish they would finish the Lowe's near work. I think they still have a month or two before they finish.

 

[nicksnothereman]

Found a couple of things.
Stanley neon green 7 piece driver/razor set-around 2.50
Appalachian trail swiss army knife clone-2.20 (rubber handle) or 2.40 (smoke clear handle)

Actually, those swiss army clone knives aren't bad at all at least the clear handle one (I got the rubber handle one for a gift, haven't checked it out). I was expecting dollar store esque quality but it's actually very close to the real thing in quality of steel and blade thickness (at least my victorinox knives which are about 20 years old). I was surprised for a chinese knife.

The stanley set is global components for 4 of the drivers, 2 are made in china (stubbies), and the razor knife I don't remember. They're decent looking drivers in my opinion, haven't used them yet though.

 

[jfleisher]

I grabbed the last Dremel 4200 unit on the shelf at the Marysville store, $49.00. The new replacement 4200 kit is at the $129 price point, and has less accessories included.

Good timing for me on this, my old Dremel (had it 20 years at least), burned up a couple of weeks ago...

 

[ATC]

117946 Dewalt Palm Sander Reg. $79.97 Paid $30.00

Dang! I really need one of these for a project coming up. I've been eyeing them for a couple weeks now.

 

[Hitchedup21]

Dang! I really need one of these for a project coming up. I've been eyeing them for a couple weeks now.

I'm thinking this was a one of kind but not positive. Haven't used yet but I have been needing one for a while as well. Guess I'm not going to be getting out of those sanding projects anymore! lol

 

[ATC]

I'm thinking this was a one of kind but not positive. Haven't used yet but I have been needing one for a while as well. Guess I'm not going to be getting out of those sanding projects anymore! lol

I think I'm just going to get the $49 1/4-sheet palm sander. I can't justify the extra $30 for a speed control...which is useless for me. It will be used for body and paint prep on a truck that I am going to fix up in the Spring when the weather is right for paint...

 

[creativecars]

I think I'm just going to get the $49 1/4-sheet palm sander. I can't justify the extra $30 for a speed control...which is useless for me. It will be used for body and paint prep on a truck that I am going to fix up in the Spring when the weather is right for paint...

I picked up one of these for a quick project and have used the heck out of it. It could use a new pad because of use and it is not as flat as it once was, but the sander works good.
http://www.harborfreight.com/palm-finishing-sander-95020.html

 

[fred d]

Looks like All the levels(except lazer levels) are going clearance

Stanley FatMax
Bostich
Kobalt

 

[stage20]

Looks like All the levels(except lazer levels) are going clearance

Stanley FatMax
Bostich
Kobalt

nationwide?

 

[dv8customs]

I've been watching the levels for a while now just waiting on a good deal. Hope my Lowes gets on board with it

 

[Hitchedup21]

Went to Lowes yesterday and found that they were starting to clearance the same 2AA Cell mag lights that HD was, price wasn't near as good as the ones I picked up at HD but I had a picture of the lights hanging on the shelf at HD and asked the Lowes manager if he would price match and he did. Picked up 4 more lights for $2.43 Lowes Item# is 180378

 

[drwheels]

some bessey 2.5 inch c clamps showed up. I gave .34 each. Levels are marked down some.

 

[dg-garage]

Went to Lowes yesterday and found that they were starting to clearance the same 2AA Cell mag lights that HD was, price wasn't near as good as the ones I picked up at HD but I had a picture of the lights hanging on the shelf at HD and asked the Lowes manager if he would price match and he did. Picked up 4 more lights for $2.43 Lowes Item# is 180378

Can you post your HD Pic of the flashlight?

 

[stage20]

all the levels were about 10% off except the kobalt. im sure they are going with lower line of tools. pretty soon it will be all harbor freight garbage at usa prices.

 

[Hitchedup21]

Can you post your HD Pic of the flashlight?

Tried but can't seem to get my phone to let me. Sorry

 

[dg-garage]

Tried but can't seem to get my phone to let me. Sorry

Thanks Hitch, no problem.

 

[CarsonConcepts]

Randomly ran across this yesterday.

Stainless steel roll up mat. Edges are a silicon/rubber with SS tubing between them. Picked up a couple for the garage and one for the actual kitchen sink. Figured it may work well for small paint/poly projects or the tubing may be useful on it's own.

Item #040713

~ Carson