To avoid these ads, REGISTER NOW!

Lowe's Clearance Thread 2015

Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
6

64merc

Well-known member
Joined
Jan 24, 2008
Messages
2,816
Location
Texas
Spn1025 said:
Beaufort, SC for $9.99 with shipping option
Click to expand...

Thanks! I finally bit at $16 or so shipped to my door (after 10% coupon) for the cutters. I was holding out for cheaper but I gave up.

I ordered a bunch of them locally when they were first marked down, but all of them were cancelled. I pretty much gave up after that.
 
D

dodge610

Well-known member
Joined
Aug 22, 2010
Messages
5,467
Location
North Canton Ohio
64merc said:
Thanks! I finally bit at $16 or so shipped to my door (after 10% coupon) for the cutters. I was holding out for cheaper but I gave up.

I ordered a bunch of them locally when they were first marked down, but all of them were cancelled. I pretty much gave up after that.
Click to expand...

Another order cancelled even lowes is red flagin people. Pretty sure HD red flagged me for snaggin deals. lol
 
C

coralnut

Banned
Joined
Jun 16, 2015
Messages
444
Location
Chicagoland
Lucky me... found one of the Boschammers on closeout. Holy ****! For a drill these things are huge! :shocking:

It has separate hammer and drill settings. It's not sold as a demo hammer, though it looks comparable to some of the demo hammers that Bosch sells. When using a chisel bit in hammer mode, are these things adequate for taking up a concrete basement floor to expose buried pipes?
 
Last edited:
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
coralnut said:
Lucky me... found one of the Boschammers on closeout. Holy ****! For a drill these things are huge! :shocking:

It has separate hammer and drill settings. It's not sold as a demo hammer, though it looks comparable to some of the demo hammers that Bosch sells. When using a chisel bit in hammer mode, are these things adequate for taking up a concrete basement floor to expose buried pipes?
Click to expand...

Where at? I'm not seeing these anywhere in NH/ME/MA/VT
 
E

elronin

Well-known member
Joined
May 26, 2012
Messages
1,261
Location
Hialeah,Fl
coralnut said:
Lucky me... found one of the Boschammers on closeout. Holy ****! For a drill these things are huge! :shocking:

It has separate hammer and drill settings. It's not sold as a demo hammer, though it looks comparable to some of the demo hammers that Bosch sells. When using a chisel bit in hammer mode, are these things adequate for taking up a concrete basement floor to expose buried pipes?
Click to expand...

Nice full price down here at that price I'd keep it
:beer:
 
R

restill

Member
Joined
Nov 14, 2013
Messages
9
Location
East Lansing, MI
I went back to south Lansing. There were a bunch of yellow tags, but not much that was really good 'deal'. Here are a couple.

0f2f0103a2772819f7366dbf466a1421.jpg


9f6f9ab2b6c548ada1e95b39b9dff6ea.jpg


59ba9df041800293cd5a0015f8f8f160.jpg

eec989c6b1cb4cb26c7982f5d3e26691.jpg


Sent from my Nexus 6 using Tapatalk
 
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
Last edited:
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
coralnut said:
only the first one is coming up with discount pricing in my local store. there must be some store to store variation on the discounts.

the second and third one are the same item. not discounted here.
Click to expand...

Ya, I noticed too, same with a lot of these big discount items. I got these prices from Rochester, NH
 
R

rtull32

Well-known member
Joined
Feb 14, 2015
Messages
63
maeu2003 said:
How do you like the cart? I need one for my mig and can't decide between that one and the one at menards...
Click to expand...
Just picked it up last night haven't pulled it out of the box yet. Will report back after I get it put together.
 
C

coralnut

Banned
Joined
Jun 16, 2015
Messages
444
Location
Chicagoland
Does anyone know what the difference is between those B&D drills? They have the same model number but one of them has a "C" suffix and the other doesn't.
 
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
coralnut said:
Does anyone know what the difference is between those B&D drills? They have the same model number but one of them has a "C" suffix and the other doesn't.
Click to expand...

one is the "Matrix" version.. that's all I can tell you..

Other than the colors, they look the same and have the same stats.
 
To avoid these ads, REGISTER NOW!
C

coralnut

Banned
Joined
Jun 16, 2015
Messages
444
Location
Chicagoland
Last edited:
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
F

firworks

Well-known member
Joined
Jun 29, 2015
Messages
4,079
Location
IL
Spn1025 said:
http://www.lowes.com/pd_625156-75774-LA800830LEDG2_1z0wh54Z1z13djp__?productId=50280471&pl=1

Utilitech 9.5-Watt (60W Equivalent) 3,000K A19 Medium Base (E-26) Warm White LED Bulb
Item #: 625156 | Model #: LA800830LEDG2
$2.48
New Lower Price
Was: $6.98
Save 64%

This has been posted before, but still showing tons of these in my area. Funny thing is, my local store is always sold out of these, while others around are showing 100+ in stock.
Click to expand...

I just bought a 2-pack of the 40W version of those at my local Lowes. They were also on clearance though I don't remember exactly how much. If anyone sees these at your local store though give them a shot. I got a bunch of Phillips 60w equivalent LED bulbs from HD recently and we love them. They are so much better than CFL bulbs and supposedly will last for 22 years.
 
F

firworks

Well-known member
Joined
Jun 29, 2015
Messages
4,079
Location
IL
coralnut said:
their lifespan ratings are such baloney -- 15,000 hour rated life span -- that's 22 years at only 2.16 hours per day. run it for 12 hours daily and the optimistic number is 3.4 years max.

reading philips datasheets i seriously doubt these lifespan ratings. the lamps don't have sufficient heatsinking to lower junction temperature enough to meet the requirements in the data sheets.

while everyone else is buying LED I'm buying the 30,000 hour F32T8 lamps on closeout for 39 cents each.
Click to expand...

T8's are fine for putting in new lights, but for a regular house bulb replacement in an existing fixture I'd still gladly take 3 years of LED over the tyranny of CFLs. I'm also glad I can stop stockpiling incandescents like a luddite fearing that one day they will be outright banned.
 
T

thoraudio

Well-known member
Joined
Aug 9, 2013
Messages
330
Location
Alabama
Don't know if it's been posted, but yesterday I was able to pick up a couple of Kobalt aluminum 6 in 1 screwdrivers for a new lower price of $2.97, down from $8.

820909631071lg.jpg


Link

I love 6 in 1s for tool bags, and the aluminum is unique.
 
D

dodge610

Well-known member
Joined
Aug 22, 2010
Messages
5,467
Location
North Canton Ohio
thoraudio said:
Don't know if it's been posted, but yesterday I was able to pick up a couple of Kobalt aluminum 6 in 1 screwdrivers for a new lower price of $2.97, down from $8.

820909631071lg.jpg


Link

I love 6 in 1s for tool bags, and the aluminum is unique.
Click to expand...

My local lowes has 29 of these and there is another lowes that isnt quite so close that has 49 of these at the $2.97 price.
 
H

honda pc

Banned
Joined
Mar 8, 2015
Messages
429
Spn1025 said:
http://www.lowes.com/pd_498816-355-...&productId=50041602&pl=1&Ns=p_product_price|1

Bostitch 0.8-HP 6-Gallon 150-PSI Electric Air Compressor
Item #: 498816 | Model #: BTFP72646

This is showing up as low as $99 (Pembroke, MA), but out of stock. Check your local stores. $99 is a nice price for this compressor + 2 nailers/1 stapler
Click to expand...


thanks for reminding me of this and info....I was able to land a display model for $45 due to a kind manager.....yeah... missing hose and air connector ends on the guns..... they said...no returns...onl manufacture warranty...
turned on compressor and it works...but havent tested the guns yet...
 
B

Bendibal

Well-known member
Joined
Jun 22, 2015
Messages
344
Location
Plainfield, IN

Attachments

  • Bostitch nailer.jpg
    Bostitch nailer.jpg
    123 KB · Views: 263
Last edited:
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
Re: Bostitch 0.8-HP 6-Gallon 150-PSI Electric Air Compressor

Bendibal said:
Unfortunately none in stock but if anyone finds one and can get it price matched here's a good deal.

http://http://www.lowes.com/pd_498816-355-BTFP72646___?Ntt=btfp72646&UserSearch=btfp72646&productId=50041602

This all looks weird on my computer so I hope it makes sense when I post it.
Click to expand...

Gee that's a nice price lol
Henderson, NC had it for $49.75

I just noticed, there's a shitload of Lowes stores in NC.. lol
Edit: fixed your link
 
Last edited:
B

Bendibal

Well-known member
Joined
Jun 22, 2015
Messages
344
Location
Plainfield, IN
Thanks for the fix. I went back and fixed it. The link was to a store that showed 4 in stock at the time with the pic for the best price I found. $49.75 is definitely better though.
 
S

SRMX

Well-known member
Joined
Apr 23, 2009
Messages
61
kunkernator said:
Anyone ever had luck with a Lowes price matching another Lowes in a different state?
Click to expand...

I tried for the first time this morning and didn't have much luck. My store had 1 Bostitch compressor and nail gun pkg (that others have purchased under $100) on "clearance" for $209. It was also the display model. I went to customer service and asked if they would match their online price and one lady said "yes" and the other said "which store, is it out of state?" I showed her the one in NC for $59 and she noticed immediately that it was out of state. They called the manager and asked what he'd do for me (lady that called put zero persuasion into the request to the manager) and he said $150. I passed.

Like most things, I'm guessing it'll depend on what the item is, quantity on hand, how long they've had it sitting on the shelf, how much the discount would be, who's trying to help you get the discount, who the manager is, what mood they are all in on that particular day, whether they think you smell nice or have bad breath, etc, etc.

Worth a try but the response appears to be far from standardized.
 
Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
Top Bottom