newcastleadam
Active member
Grew out of my Mac toolbox, time for someone else's garage. Not the prettiest, but all drawers, locks, and casters work. Model #s MB4100 and MB4200, combined measure 42x18x55. Keys and drawer liners included. $600 obo, pickup preferred.
It is an older Mac box that has been used, so there are scuffs, scrapes, and other wear marks. When I first got it I cleaned it up and applied ospho to all bare metal, wear marks, rust, etc. Then all drawers were removed to service rails and treat inner surfaces, as well as installed functional locks. The large center drawer has ball bearings, all others are sliders. Drawer liners were then cut to fit and installed (on all drawers), and box was ready for use. Worked great, got full of tools, and an upgrade was needed. Toolboxes do tend to fill up quite rapidly
Edit: some had trouble loading pics, should be fixed.
It is an older Mac box that has been used, so there are scuffs, scrapes, and other wear marks. When I first got it I cleaned it up and applied ospho to all bare metal, wear marks, rust, etc. Then all drawers were removed to service rails and treat inner surfaces, as well as installed functional locks. The large center drawer has ball bearings, all others are sliders. Drawer liners were then cut to fit and installed (on all drawers), and box was ready for use. Worked great, got full of tools, and an upgrade was needed. Toolboxes do tend to fill up quite rapidly
Edit: some had trouble loading pics, should be fixed.
Last edited: