MAC tools - show us your MAC tools!
- Thread starter Shelbylex
- Start date
BigNuge
Well-known member
I inherited a bunch of MAC stuff from my father, my fav being a stubby wrench set (metric). One of those sets that I don’t need very often, but when I do they are clutch!!
I have a long swivel head 3/8” ratchet, I’ve gone through 5-6 heads in it. ***** that I have to chase a truck down when it breaks, I usually ambush the poor bastards at the gas station when I see them[emoji1787][emoji1787]
Sent from my iPhone using Tapatalk
I have a long swivel head 3/8” ratchet, I’ve gone through 5-6 heads in it. ***** that I have to chase a truck down when it breaks, I usually ambush the poor bastards at the gas station when I see them[emoji1787][emoji1787]
Sent from my iPhone using Tapatalk
javyLSU
Well-known member
Something must be wrong with my connection, it seems like I’m the only one who can’t see Spike’s pictures...
macgee
Well-known member
I cant see them either.
Usually this issue is because of Imgur on GJ but that's never been a problem for me.
Nothing here either.
Wrench97
Well-known member
He's posting them from his Google Drive account and there are no permissions for 3rd party use.
HTML:
[IMG]https://lh3.googleusercontent.com/6EqG2yx8v2cRmxBasIbIarLpI722inVaP4O9ip-LRsP2mMmaf3NfcnIHHurL-Kr3rQUqprIyMpr3FPIFlntGjSPzl1vmcNdOUMXL1tnbDpdi509PAVJ5kQHJ4zRYZWhVmfOlk6t9OkOH3KbRvTNcdys_6dJi2Ohi02KI0AE0znKMr9bHZIS9EX35f26hJKZoAWGnF651b2kKz9x5BNTd86l2sAQuBMbykmXP2EgQ-zoQdXDRLt2QfvfM3jj76yW7LGlpTVgeHPs0e85c9oz6FWz_MPvuuvmzkzJSqqAtSMTL9gJpJKL_ko-TQAxqcGhqSJ-L-bu63D6IkBF4CTfzQZ34FUXu7Nu5b4HGuK4h5Xv3HnGiczmwQsd4yRAMIiOqEU9UlydguQ3QwiWCYdqU0jY2l4DmS6OjbWpYX32sUWLAqkyU0j_TiJxtzy9WYxSKdYgje4jqGMiPgMkIGSt5_tYSVEtyyqtOyfpNY27KVQ1pgCDWLy-_8y5ISURqlLlFlSBNDo5SBTgON4KheoHet4HMFhtezpQV-B87FfVuHXisCUIuIOcaXu8C-ZHmvBz0E9mumkUyyGwbiuquxeM8_qG3X9bVvKLsFAvujwm99ZLTpdU66TOm_UhM9Sl2pNjrcB6SFkfQXWVJQq6kkqHWHTv7xUqRyoDazPBSA3nf9iCOcqnXU2izyEKW3ufzFLmmCpcpZYsAKkGwhQGO7UNM0dM=w640-h480-no?authuser=0[/IMG]BigNuge
Well-known member
javyLSU
Well-known member
I don’t have too much MAC stuff...
Used to have their 3/8” 12V ratchet, but I found it slow and heavy - so that got traded in for a long neck Snap-on.
When it comes to hand tools, a lot of their prices for rebranded import stuff approaches the Snap-on equivalent which are usually made in USA, so consequently I have a lot more Snap-on tools. I do like those Precision Torque wrenches - I would have considered buying those if I didn’t already have my flank drive plus set.
Used to have their 3/8” 12V ratchet, but I found it slow and heavy - so that got traded in for a long neck Snap-on.
When it comes to hand tools, a lot of their prices for rebranded import stuff approaches the Snap-on equivalent which are usually made in USA, so consequently I have a lot more Snap-on tools. I do like those Precision Torque wrenches - I would have considered buying those if I didn’t already have my flank drive plus set.
Attachments
Spike01
Active member
I'm not sure what the issue is with the pictures. They are hosted on my google account. Maybe a moderator can shed some light on the issue. I could try another hosting service as well.
Spike01
Active member
I love MAC tools. To me they are the best out there. I recently just completed my dream 3/8 dr socket set all MAC USA shallow and deep SAE and Metric. I also have a few ratchets from MAC and just ordered 2 more of there locking handled extensions (spinner handles) today. I get MAC for a great deal almost HF priced threw work which helps me love them that much more!
Spike01
Active member
macgee
Well-known member
Photos up on another hosting service. They should be visible now. Thanks everyone.
Yup, working now.
javyLSU
Well-known member
Thanks Spike, nice stuff you got there!
Wrench97
Well-known member
Photos up on another hosting service. They should be visible now. Thanks everyone.
Easiest way is to post them as a attachment to this site that way there here and don't get caught in any of the hosting wars...................
Robbie B
Well-known member
I bought a vice grip set and a long handle pliers set from Mac. That was enough to break me from ever buying from Mac again.
richfinn
Well-known member
Spike01
Active member
A few more:
Spike01
Active member
I have a ton of MAC tools!Sharing just a few for today..
Very nice! Thanks for sharing
Spike01
Active member
This is a 1970's virgin set passed down from my Dad
Great to see them again! And great to see your post!!
BiggityBen
Well-known member
i have a ton of Mac tools because i have a great dealer. i don't have any pics at the moment except for my new (two months old maybe) toolbox for my home garage, with two drawers including some Mac tools in them:
i have a lot more at home and in my work van.
i have a lot more at home and in my work van.
tool_scrounge
Well-known member
Last weekend I responded to an ad for a beater toolbox with tools. It looked like it has some MAC wrenches so I quickly went over. I came back with two beater tool boxes with some tools. I ended up with a set of MAC metric combination wrenches, a set of deep metric 3/8" sockets and a few metric Saltus wrenches. Unfortunately it was missing the 13mm combination wrench, but maybe I can eventually find one.
I suspect the tools are 90's vintage based on the other Craftsman sockets were from that vintage. There is some chrome chipping and some of the forging is a bit crude on the wrenches, but they feel good in the hand. The deep sockets are different though.
I suspect the tools are 90's vintage based on the other Craftsman sockets were from that vintage. There is some chrome chipping and some of the forging is a bit crude on the wrenches, but they feel good in the hand. The deep sockets are different though.
Attachments
javyLSU
Well-known member
I had to put together some furniture this past weekend, and pulled out the SBDR123SA ratcheting bit holder/bit set pictured earlier in this thread. That might be the greatest "around the house set ever" - it was literally the only set of tools I needed to put together 3 different pieces of furniture...
Ton ton
Well-known member
Great thread, OP.
Ton ton
Well-known member
How's the best way to get ahold of a Mac driver? I tried 2 different zip codes on the Mac website.
Just call the MAC number and order from them. If you want a promo from the monthly flyer, just mention it and they will honor the pricing.
They may have better info on potential MAC driver as well, or there may not be a route nearby to you.
Ton ton
Well-known member
Thanks.
jrbpit1
Well-known member
Schurkey
Well-known member
Mac-branded "ET-88"; Fluke 88 (original 88, not 88V)
The "Mac Man" around here was a stable presence for decades. He was in business before I was; and lasted until a few years ago. First thing I ever bought from a "Tool Truck" was a Mac idle-mixture-screw adjuster; about 1980.
The "New" Mac Man seems to care about customer service. I have Mac air drills, one needs a reverse-thread chuck screw. He's tried to help me with that but without success because the drills have been discontinued by the manufacturer. Even the folks who made the drills for Mac (Viking Tools) don't have parts.
The "Mac Man" around here was a stable presence for decades. He was in business before I was; and lasted until a few years ago. First thing I ever bought from a "Tool Truck" was a Mac idle-mixture-screw adjuster; about 1980.
The "New" Mac Man seems to care about customer service. I have Mac air drills, one needs a reverse-thread chuck screw. He's tried to help me with that but without success because the drills have been discontinued by the manufacturer. Even the folks who made the drills for Mac (Viking Tools) don't have parts.
Last edited:
KnurledNut
Well-known member
Nutria
Well-known member
I never did like the finish on Mac impact sockets . . .
Actually, these are semi-survivors of the wildfire that got our house and shop six years ago. The sockets were part of my first 3/8" impact set that were a gift from my father-in-law back in the 80s-- what a guy! I need to clean these up and put them back in service, though I think that I'll use them for lighter duty only, like with a butterfly and not turned up to eleven. Anyway, something different for the thread.
Actually, these are semi-survivors of the wildfire that got our house and shop six years ago. The sockets were part of my first 3/8" impact set that were a gift from my father-in-law back in the 80s-- what a guy! I need to clean these up and put them back in service, though I think that I'll use them for lighter duty only, like with a butterfly and not turned up to eleven. Anyway, something different for the thread.
mn700vforce
Well-known member
Here is my collection of Mac Axis ratchets. 26” long 1/2 drive on the left. The four in the middle are 3/8” drive and the the on the right is a 9” long 1/4” drive.
Last edited:
greg13
Well-known member
I have been buying Mac for over 40 years. For the most part I have been lucky enough to end up with GREAT dealers, They are the ones that make or break a deal just like other brands. If a dealer won't stand behind what he sells it's not worth buying.
I have seen a very disturbing trend since the new CEO (former Stanley exec. I think) has taken over, He seems to think the route sales should match the sales of the big box stores and gives little, if any support to the franchise owners. the district manager just quit because of the lack of support. They run the monthly specials and when the dealers try to order them they are on back order. When the back orders do come in it may be 3 months worth and the dealers must take it ALL or none AND pay for it in 30 days in addition to the regular stock. I can see dealers getting disgusted and calling it quits.
I have seen a very disturbing trend since the new CEO (former Stanley exec. I think) has taken over, He seems to think the route sales should match the sales of the big box stores and gives little, if any support to the franchise owners. the district manager just quit because of the lack of support. They run the monthly specials and when the dealers try to order them they are on back order. When the back orders do come in it may be 3 months worth and the dealers must take it ALL or none AND pay for it in 30 days in addition to the regular stock. I can see dealers getting disgusted and calling it quits.