MAKITA: Teal Deals & Steals Permathread

[atlm]

Home Depot has the 12v CT232RX kit for $102.99. This has the shorter drill/driver and impact of the CT232 set, but with larger 2Ah batteries (with charge level lights) and a metal case.

3camels shows it’s consistently been $160-ish on Amazon. Using the $110 gift card for $100 from PayPal made it about $100 after tax for me.

I bought three 12v drill/impact sets (all brushed): Bosch, Milwaukee, and Makita. I would have been happy with any of them individually, but after using them side by side, the Makita became my favorite by far for its ergonomics - the thin handle and balanced weight between the battery and drive end.

 

[shteii01]

Home Depot has the 12v CT232RX kit for $102.99. This has the shorter drill/driver and impact of the CT232 set, but with larger 2Ah batteries (with charge level lights) and a metal case.

3camels shows it’s consistently been $160-ish on Amazon. Using the $110 gift card for $100 from PayPal made it about $100 after tax for me.

I bought three 12v drill/impact sets (all brushed): Bosch, Milwaukee, and Makita. I would have been happy with any of them individually, but after using them side by side, the Makita became my favorite by far for its ergonomics - the thin handle and balanced weight between the battery and drive end.

https://www.homedepot.com/p/Makita-...rx}:st+oos:{0:1}+dln:{562980}+qu:{ct232rx}:qu
3/8" chuck.

 

[MadMark]

Saw these two in the NYC Home Depot.
Not sure if they're a good deal or not, let me know what you think.

The 1/2 sq. drive impact has a detent instead of a hog ring.
Could not see the battery amperage.
It also had a clear plastic nose piece just behind the square drive,
I think this would crack quickly in use.

The 1/4 hex bit impact driver was not brushless, it said 4-pole motor.

 

[Voi]

Saw these two in the NYC Home Depot.
Not sure if they're a good deal or not, let me know what you think.

The 1/2 sq. drive impact has a detent instead of a hog ring.
Could not see the battery amperage.
It also had a clear plastic nose piece just behind the square drive,
I think this would crack quickly in use.

The 1/4 hex bit impact driver was not brushless, it said 4-pole motor.

I have the XWT11z. I think that's a good price with the case, charger and batter (2 amp-hour, IIRC).

I am not as hard on an impact wrench as I am on other tools but nothing has cracked as of yet.

I like the pin detent. It is shaped in a way that allows sockets to be removed without depressing the pin. I haven't tried it with a super small and/or short socket, however. My arthritis ridden hands might have trouble with that.

I own a different Makita impact driver so not sure about the brushed model for sale.

 

[gamp945]

Good clearance deal on this Makita cordless / corded vacuum:

https://www.homedepot.com/p/Makita-...2-1-Gal-Dry-Vacuum-Tool-Only-XCV04Z/207143602

Regular price: $679
Clearance price: $400.61

 

[oflannabhra]

Here are HD’s Black Friday teal deals: https://i.blackfriday.com/imagery/ad-scan-pages/53434.jpg

 

[oflannabhra]

Amazon’s $25 off $100 promo just went live. Of note is the XDT16Z bare tool for $135 after the deal

link to sale

 

[oflannabhra]

Makita has a deal on their LXT tracksaw for the holidays. $500 and includes extra rail and a subcompact impact driver:

Deal at HD

 

[oflannabhra]

Makita has a promo at Home Depot right now where if you buy a starter battery & charger kit, you get a free tool, (selected from a list of 10). The interesting thing is that the discount is applied to each item in your cart, allowing one to return the battery bundle and keep the discount on the tool (normally around 40% off).

This thread details the steps to take. I can confirm this works, but you can’t use their app to check out.

 

[oflannabhra]

Home Depot has a great deal on several Makita tools that normally don’t go on sale. The bundle includes 2x4.0Ah LXT batteries and charger, but some folks have been able to return those for a refund and keep the discounted tool.

 

[jd_1138]

I saw this on ebay just now. $97 for a Makita 12V impact driver plus 12V regular drill and charger, 2 batteries, and a bag. Great cheap way into the 12V world. I have ordered from CPO and their tools are pristine. I am in the 18V Makita platform, but I ordered one of these for something lighter/smaller. I do a lot of projects where 12V would be enough.

https://www.ebay.com/itm/332082451702?_trkparms=5373%3A0%7C5374%3AFeatured%7C5079%3A6000003158

 

[LG63]

Not a killer deal but these Makita cut off wheels seem to perform similar to Metabo Slicer Plus wheels. Made in Germany so maybe they come from the same source. At $35.06 for 25 on Amazon it was a good enought deal for me.
6 inch cut off wheels

 

[Voi]

Acme Tools is have an online 10% off promotion with code MAK10. Ends tomorrow, I believe.

 

[Fusionman79]

XWL01PT 36v 14” Cut-Off saw kit $149 at Home Depot. Steal of a deal, won’t last long.

Makita 18-Volt X2 LXT Lithium-Ion 36-Volt Brushless Cordless 14 in. Cut-Off Saw with Electric Brake, 5.0 Ah XWL01PT - The Home Depot

Now you can tackle the job with ease and comfort by choosing this Makita X LithiumIon Brushless Cordless CutOff Saw with Electric Brake.

www.homedepot.com

 

[loganb]

XWL01PT 36v 14” Cut-Off saw kit $149 at Home Depot. Steal of a deal, won’t last long.

Makita 18-Volt X2 LXT Lithium-Ion 36-Volt Brushless Cordless 14 in. Cut-Off Saw with Electric Brake, 5.0 Ah XWL01PT - The Home Depot

Now you can tackle the job with ease and comfort by choosing this Makita X LithiumIon Brushless Cordless CutOff Saw with Electric Brake.

www.homedepot.com

That was a heck of a deal if its accurate...will find out in a week when its supposed to arrive...thank you!

 

[2manytools]

That was a heck of a deal if its accurate...will find out in a week when its supposed to arrive...thank you!

you will get it. one nice thing about HD, they don't cancel orders (99% of the time), especially when it wasn't a mistake but a clearance price.

 

[Fusionman79]

That was a heck of a deal if its accurate...will find out in a week when its supposed to arrive...thank you!

There were 59 left when I ordered mine. They were gone in a couple hours.

 

[goforbroke]

I tried to order one last night around 6pm east coast time and they were all gone.

 

[alinc100]

Tractor Supply has the Makita inflator as a bare tool for $99. When you put it in your cart it allows you to add a bonus tool which happens to be brushless impact/drill/2 battery/charger kit for free. You have to tinker with pickup/shipping/store availability. YMMV.

 

[60rftc]

you will get it. one nice thing about HD, they don't cancel orders (99% of the time), especially when it wasn't a mistake but a clearance price.

Has anyone received theirs. I am still waiting. Shipping label was printed but Fedex hasn't received it. Home Depot keeps telling me to wait since it might show up. I'm giving it another week. I would've already canceled if it wasn't such a great deal.

 

[loganb]

Has anyone received theirs. I am still waiting. Shipping label was printed but Fedex hasn't received it. Home Depot keeps telling me to wait since it might show up. I'm giving it another week. I would've already canceled if it wasn't such a great deal.

I got mine...2 weeks ago I think? Actually just checked my pictures, it arrived on the 29th so if you don't have it something went wrong in the process and I'd open a ticket with FedEx to start

 

[pl_silverado]

Bunch of holiday deals at depot where you buy a kit and get free tool. If you buy the XT288T kit you get two free tools. Couldn’t pass that up today, got that and the jig saw and grinder for $399.

 

[countryss]

Makita XAG04Z 18V LXT® Lithium-Ion Brushless Cordless 4-1/2” / 5" Cut-Off/Angle Grinder, Tool Only https://www.amazon.com/dp/B071KD1CHB/?tag=atomicindus08-20

 

[countryss]

58% off

 

[mrvm]

Price of admission for cordless nailers remain high so prices for conventional air tools are coming down.

 

[mrvm]

Picked up this Makita dual line string trimmer on clearance for $99. Includes the charger and 4.0 LXT 18V battery which makes it worth it if you find it at the HD

 

[FordTruckWench]

Big Orange has the Makita Multi-Tool at the reduced price of $99, down from $129 or $139. One location had a Makita display in the front aisle with a stack of maybe twenty of these. Even in the normal tool aisle, the price sticker showed the new price. My closest store hasn't put any out yet, nor changed the price sticker.

Note, this is a brushed tool.