Manitowoc Lift CFF90 install

[crushr]

Not sure if I am I the right section for this question. I purchased this used lift and I cannot seem to find the directions for the install. Would anyone be able to hook me up.

Thanks

 

[Kev442]

Why not go to the source?

http://www.sviinternational.com/products/manitowoc_lifts/

 

[crushr]

Yes I have visited that site and there is good info there unfortunately no set up instructions. They have parts list but no set up info. I am sure I can get it set up just thought it would be valuable to have documentation on lift.

 

[Kev442]

Call them. I'm sure they have the PDF they can email to you. They can't sell you parts if it's not installed!

 

[bobj49f2]

crushr do you still need the installation manual? I just bought a lift and it came with installation and operating instructions.

If you still need them let me know and I'll email copies.

 

[GordonsGarage]

crushr do you still need the installation manual? I just bought a lift and it came with installation and operating instructions.

If you still need them let me know and I'll email copies.

Hello Bobj49f2, any chance I could get a copy of the installation manual? I bought a used lift (in pieces), and would love to have a cheat sheet. Just guessing on putting this together is not high on my list...

Any help would be appreciated!

 

[NeverEnoughSpace]

I Pmed Bob, but if anyone else can help that would be great. I need to know the span in between main posts, The closest point from the foot pad to foot pad would be best. Thanks in advance, Jeremy

 

[NeverEnoughSpace]

Oh yeah I have a CFF 70 series not a 90.

 

[NeverEnoughSpace]

OK, so we routed the leveling wire inside the main post's like one would thin they would go, BUT, they go on the exterior of the posts to the inside. My Buddy has the same lift and this is whats done on his..

 

[bobj49f2]

I've been working long hours the last couple of days and haven't been by my computer. Send me your email address and I'll send you all of what I have.

 

[btsayles]

I know it has been a long time since this thread last had a post, but I also bought a used cff90. Does anyone have a pdf of this lift? I would like a copy if someone is so inclined. I have the posts up, and I see the cross bar is different on the ends. I am thinking that I only want to install it once. Thank you guys!

 

[bobj49f2]

Save offer, send me your email address and I'll send you everything I have.

If you can't PM me with your email address let me know.

 

[mr bridger]

Hello saw your post for install for the CFF-90, I just purchaced one today with no info did you get an install manual if so any chance of emailing it to me or can you refer where I can get a copy.
Many thanks
Christian.

 

[bobj49f2]

Still have the lift and info. Info is all yours for the price of an email.

 

[mr bridger]

Many thanks
[email protected]

 

[spencer90]

i just picked up a cff90 and could really use the install email as well. my email is [email protected]

thank you!

 

[bobj49f2]

Sent, enjoy your lift.

 

[Intimidator88]

I have the same problem no instructions. Can anyone help please?

 

[bobj49f2]

PM me your email address and I'll send .pdf copies of the instructions I have.

BTW, I might be loosing my lift in order to sell the building I have mine in. I really like the lift and don't want to let it go but if it's a way I can sell the building I'll have to do it. If anyone gets a line on a good used unit near SE Wisconsin please send me a message. I want to get the same unit, 9000# Manitowoc.

 

[Intimidator88]

I PM my email not sure if you got it. Let me know thanks.

 

[bobj49f2]

I got your emails, I sent everything I have.

 

[stevew.ckc]

I am looking for install manual for CFF 70 Gilbarco, any help appreciated.

Steve Walters
[email protected]

 

[jkaz58]

Hi I just picked up a cff 90 in in a box could I get a copy of the installation manual also thanks [email protected]

 

[bobj49f2]

For anyone else who finds one of these lifts and wants the information I have just email me and I'll bounce all of the information I have back to you.

bobj(at)fatfenderedtrucks(dot)com, doing in the hope that this will prevent spam robots from harvesting my email. You know what to do.

 

[bobj49f2]

Good news, at least to me, I'm not losing my lift! Bummer is I'm also not selling my shop now, the deal fell through. But when I get a potential buyer the first thing I mention is the lift is getting pulled.

 

[bobj49f2]

I've gotten a lot of requests for the Manitowoc literature I have and have been happy to email it to anyone interested. The only problem is one file, the installation instructions, is a rather big file and it takes a long time to email and some people seem not to be able to receive such a big file. I finally figured out how to post the files on my website. I wasn't allowed to before but now I am.

These are all the documents I have for the lift. They are all in .pdf format:

Manitowoc CCF-90 Lift Installation Instructions and Parts List

Manitowoc CCF-90 Parts lift

Manitowoc and Gilbarco Repair Parts List

Operating Instructions

 

[carhunter]

Bringing up an old thread to say thanks to Bob for posting the instructions. Just what I needed today!

 

[bobj49f2]

Glad it was a help. I'll be needing to look them over again. I pulled my left out of my business shop last year because I planned on selling the building. I have a 30'x50' pole building at my new house, so I'll be installing the lift in that. Hopefully soon, I've already spent $600 on truck repairs I could have done myself if the lift was up.