Many tools, Snap-On and other quality items

[doug.j]

Some tools have not been used but were stored in a tool box so they might have minor scratches and dirt. If you are not satisfied with the condition of any item I will refund your money and cover shipping. Tools are USA unless noted.

Prices do not include shipping. If you want to estimate shipping I am shipping from 47150, New Albany, IN. I can ship USPS or UPS. Shipping is expensive so multiple items make the deals much better. Insurance is required on expensive shipments. I'll mark the items as pending when someone claims them the best I can. First person to state they will buy gets the item. Please use PM first and then follow with a post if you wish. Thanks, Doug



--------- Sold list -------------

Item 1. SK Puller (USA), Hub Puller, Model,92523 $25 -sold
Item 2. Irwin Vise Grips (made in USA),4 piece set, 2 unused, 2 used,$25 -sold
Item 3. Filter tool (USA) $5 -sold
Item 4. Snap-On (USA?) socket strips, $20 -sold
Item 6. Snap-On Compression tester MT308kb, used once $110 -sold
Item 8, Snap-On 3/8 mm socket set 12pt, 212FSMY, $100 -sold
Item 9, Snap-on 3/8 SAE socket set 12pt, 211FY, $85 -sold
Item 10, Eastwood flange pliers forms an offset in sheet metal for patch repairs (COO unknown) model 31092, 15 -sold
Item 11, Ridgid pipe wrench #6, good condition painted black $4 -sold
Item 12, Channel Lock Pliers, 410 used, $6 -sold
Item 13, Facom punch set (5,4,3mm) model 249.g5,g4,g3 $6 -sold
Item 14, Snap-On F80 3/8 ratchet rare Stamped USA , very light use $60 -sold
Item 15, Snap-On screwdriver, SDDD101, $17 - sold
Item 17, Snap-On bronze hammer 16oz HBBT16 light use $38 -sold
Item 18, Snap-On rubber hammer HBPT24 light use $32 -sold
Item 19, K-D (USA) pliers hose ring pliers model 429, $6 -sold
Item 20 Craftsman hose pinch pliers, model 47051, $9 -sold
Item 21, Eastwood shot bags 12" and 6" $20 -sold
Item 22, Snap-On wrenches MM 4-9mm, 6 pt, OXIM707SBK $65
Item 23, Snap-On wrenches SAE DS806AK $38 -sold
Item 26, Snap-On battery pliers, 208BCP $15 -sold
Item 27, Shears Griots/Kretzer (Germany) $5 -sold
Item 28, BluePoint battery wrench (USA), YA249L, like use $8 -sold
Item 29, Oetiker (USA) clamp pliers, $10 -sold
Item 30, Seal puller (USA), $6 -sold
Item 31, IR air drill, 7802RA $50 -sold
Item 32, QuickWedge screw holding drivers, $6 -sold
Item 34, Matco bit set MQC29B, (light use on one bit, rest unused) $40 -sold
Item 36, Snap-On tie end socket WA14A light use $24 -sold
Item 37, Snap-On Long reach pliers 102LHCP $ 55 -sold
Item 38, Lisle (USA) steering wheel puller 45000, $6 -sold
Item 39, Snap-On clock (COO ?) , light use $15 -sold
Item 41, Blue Point line flare set, TFM5 metric $24 -sold
Item 42, Long drill bit, $6 --- reduced to $3 -sold
Item 43 Snap-On Old Ford - Dodge alignment tool, $15 -sold
Item 44 Craftsman adjustable wrench, $3 -sold
Item 45 Wiggy tester, $3 -sold
Item 24, Snap-On brake tool set (10mm), BTK5 all items mint condition $105 - reduced to $80. ---sold
Item 50 Snap On Flywheel turning tool A144A, light use, mint condition, $ 40. ---- sold
Item 25, Snap-On odd 10mm wrench, S6130A $12 ------------reduced to $5. ----sold
Item 33, Snap-On angle gauge TA360, looks new $38 ---------- reduced to $26. ---- sold
Item 35, Snap-On 1/4 torque wrench QD1R50, I don't think this has ever been used. $130 --------- reduced to $100 -sold
Item 46 Welpers Pliers (MIG welding tool) Made in Japan -not junk used but good condition $7.00 ----sold
Item 47 Klein electric tool USA light use , mint condition $5.00 -sold
Item 5. Martin body tool set (USA), Model 647k, all items new, $190 ---reduced to $110 --sold
Item 16, Craftsman 8pt sockets 1/2 drive, older model $30 ------------- reduced to $18 ---sold
Item 40, Slide hammer custom made, very well made, 3 rods, and set of ends , $50 -------reduced to $30 -sold
Item 48 Gear Wrench (Taiwan ?) 8 piece SAE ratchet set 5/16 to 3/4", light use, great condition $23 ---sold
Item 49 GearWrench (Taiwan ?) 12 piece MM ratchet set 8-19mm light use, great condition, photo is not that good, they are not all scratched up, Includes Ernst wrench rack $42 ---sold

Item 51 Snap On XB605A Wrench Set. Never used, 3/8" to 15/16" Snap On price $206.50
-- $110 Shipped (without tray) --- reduced to $90 - sold


-------Still Available -----------

Item 7, Mitutoyo dial gage and stand (Japan), model DGS-E, gage 1044-01, mint condition $45

 

[JeremyManning]

Interested in the clock how much shipped to Ontario, Canada

 

[Jallred]

Pm on the way for the long reach pliers.

 

[Grape Ape]

I'll take the following items if you accept PayPal:

4
8
9
12
31
45

Send me a PM.

Thanks.

 

[Crank1]

In Line---
8
9
21
26
37

 

[hifi_hokie]

Gah, I'm always late Oh well, I'd be interested in the SO long reach set if it falls through...

 

[yogitech]

I'll take item #36 Tie rod socket, PM me...

 

[Scout Driver]

PM sent on

Item 28, BluePoint battery wrench (USA), YA249L, $8

Scott

 

[I can fix anything]

Pm 22 23

 

[fxt]

Pm inbound for 11 19 13 41

 

[Even 11]

2nd on the clock

Interested in 13 and 14 too!

-Dane

 

[mixxmstrmike]

I guess I'm third in line for 37.

Thanks,
Mike

 

[SS5150]

Interested in 22 & 36

 

[Tatsuya]

Interested in 11, 13, 19, 38.

 

[SiCkSTi04]

#38 #29 #19 #20 #1 please send me a Pm with paypal info

 

[1stwarrior95]

Item 13, Facom punch set (5,4,3mm) model 249.g5,g4,g3 $6

Item 15, Snap-On screwdriver, SDDD101, $17

Item 38, Lisle (USA) steering wheel puller 45000, $6

How much shipped for these items above? Also are all the bits in the screwdriver torx and what sizes?

 

[MartyO]

I will take whatever is left of what is listed below. I know that I picked some items that are marked pending. It is okay if I don't get them but I wanted to be in line if deals fell through.

Please and thanks.

**** PM sent as well ****

tem 1. SK Puller (USA), Hub Puller, Model,92523 $25

Item 2. Irwin Vise Grips (made in USA),4 piece set, 2 unused, 2 used,$25


Item 10, Eastwood flange pliers forms an offset in sheet metal for patch repairs (COO unknown) model 31092, $15

Item 13, Facom punch set (5,4,3mm) model 249.g5,g4,g3 $6

Item 19, K-D (USA) pliers hose ring pliers model 429, $6

Item 26, Snap-On battery pliers, 208BCP $15

Item 27, Shears Griots/Kretzer (Germany) light use $5

Item 28, BluePoint battery wrench (USA), YA249L, $8 PENDING

Item 29, Oetiker (USA) clamp pliers, $10

Item 30, Seal puller (USA), $6

Item 31, IR air drill, 7802RA $50 PENDING

Item 32, QuickWedge screw holding drivers, $6

Item 34, Matco bit set MQC29B, (light use on one bit, rest unused) $40

Item 38, Lisle (USA) steering wheel puller 45000, $6

Item 41, Blue Point line flare set, TFM5 metric $24

Item 45 Wiggy tester, $3 PENDING

 

[outlander800]

If 4,8, and 26 fall through, I will take them. Man, this place gobbles up the good stuff fast.

 

[SLOCOBRAR]

if evan 11 does,nt take # 14 i will

 

[Johnny chaos]

I'll take 19,20,21,22.

 

[DMessin]

I'll take whatever is left of below, if anything!

Item 30, Seal puller (USA), $6
Item 24, Snap-On brake tool set (10mm), BTK5 $105
Item 22, Snap-On wrenches MM 4-9mm, 6 pt, OXIM707SBK $65
Item 20 Craftsman hose pinch pliers, model 47051, $9 \
Item 14, Snap-On F80 3/8 ratchet rare Stamped USA , very light use $60
Item 11, Ridgid pipe wrench #6, good condition painted black $4
Item 1. SK Puller (USA), Hub Puller, Model,92523 $25

 

[aussiek2000]

............

 

[thrifty bill]

PM sent on #22, just in case (looks like it is gone).

Thanks!

 

[aussiek2000]

Has anyone actually bought any thing yet? He replied to me, but has yet to give me a paypal and price shipped.

 

[fxt]

I got a total price shipped. Asked for PayPal address and nothing for 13 hours.sw

 

[leod]

i'll take Item 2 if still available
Item 2. Irwin Vise Grips (made in USA),4 piece set, 2 unused, 2 used,$25

 

[fatboy99]

PM sent on the Martin body tools

Sent another PM changed my mind Thank's

 

[aussiek2000]

nevermind

 

[Crank1]

Give him a minute, he only posted this 2 days ago, he may be working or busy with life.
Still interested in all things I mentioned, so if someone backs out ahead of me, please move me up in line!
Brandon

 

[gj67stang]

PM on the way: 17, 18, 29, 39.

 

[MadMark]

Does item 7 the Mitutuyo gage and stand come with its own box? is it used for adjusting rod bolts? if so I'll take it.
Also item 13, the facum punches

 

[doug.j]

I've updated the status of items in the original post. Most items marked as pending are probably sold. They sold very quickly. I'm putting together the list and trying to make sure first takers were counted. If anyone wants to back out of an item feel free to do so. No hard feelings. I'll be sending the PMs soon. I do work some brutal hours so bare with me.

Thanks

 

[MartyO]

I am dying to know if I was in on time!

LOL!!!

 

[Johnny chaos]

I Pm'd quickly, I hope it was in time

 

[SiCkSTi04]

Guess i'm out lol my requests are already pending lol

 

[yogitech]

Still wanting the tie rod socket! Let me know, thanks...

 

[Scout Driver]

Got my wrench today! Shipped fast and very, very well packed.

Thanks Doug!

Scott

 

[yogitech]

Got my wrench today! Shipped fast and very, very well packed.

Thanks Doug!

Scott

I'm STILL waiting to pay for my "pending" item....

 

[gj67stang]

Has anyone heard back from doug.j?

The items I wanted are "pending" but I don't know if they're pending to me or someone else!

 

[Crank1]

We conversed yesterday I believe, he sent me his paypal and I sent him some money, then he told me the items are on their way... So if you haven't heard anything, I would venture you are not the one they are pending to, well if they are already claimed above you, but he did take a few days to get back with me initially...