Marine quick disconnects

[jjrbus]

I am putting together an extended run gas setup for my Honda EU2200i generator and confused. I have done this once before and do not recall it being confusing? Must be age catching up with me? I need quick disconnects for the generator and fuel tank and would like input if these fittings are compatible.

https://www.amazon.com/dp/B0BSLBB83P/?tag=atomicindus08-20

https://www.amazon.com/gp/product/B00E21PSCI/?tag=atomicindus08-20

 

[WoodsTruck]

I bought one of these off ebay since I don't have marine tanks, but I have many 6 gallon fuel cans. I will make a spacer/fitting for the jug cap so I can run a siphon line up to the cap, then another hose to the generator. Your version may be better if you have the marine jug.

Pardon Our Interruption...

 

[jjrbus]

Thanks, I do not have enough clearance to go straight up, so need a disconnect and I have the portable marine gas can on the other end.

 

[Firstram]

Does your boat tank already have fittings? I don't think the fittings you posted are compatible with each other, these should do. Do you plan to make your own hose or a premade one?

https://www.amazon.com/dp/B003BMEISO/?tag=atomicindus08-20

And

https://www.amazon.com/dp/B001O0DENK/?tag=atomicindus08-20

 

[jjrbus]

I bought one of these off ebay since I don't have marine tanks, but I have many 6 gallon fuel cans. I will make a spacer/fitting for the jug cap so I can run a siphon line up to the cap, then another hose to the generator. Your version may be better if you have the marine jug.

Pardon Our Interruption...

*&^(^% Got out my spare aluminum gas cap, does not fit the EU2200!

 

[Firstram]

*&^(^% Got out my spare aluminum gas cap, does not fit the EU2200!

Can't believe they would do that, bummer!

 

[jjrbus]

Does your boat tank already have fittings? I don't think the fittings you posted are compatible with each other, these should do. Do you plan to make your own hose or a premade one?

https://www.amazon.com/dp/B003BMEISO/?tag=atomicindus08-20

And

https://www.amazon.com/dp/B001O0DENK/?tag=atomicindus08-20

Will DIY, the ready made setups are fairly pricy. Running into an issue with the fittings mostly being 3/8, I would prefer 1/4 so am going to try and jam a 1/4 hose on 5/16 fitting.

Does your boat tank already have fittings? I don't think the fittings you posted are compatible with each other, these should do. Do you plan to make your own hose or a premade one?

https://www.amazon.com/dp/B003BMEISO/?tag=atomicindus08-20

And

https://www.amazon.com/dp/B001O0DENK/?tag=atomicindus08-20

Thanks, I looked at the fittings and the ones I ordered are slightly different from what you posted, so ordered what you suggested.

 

[Firstram]

Hopefully you can return which ever fitting don't work. I still have a pile of mistakes from the past and I haven't had a boat in years!