Matts Cyber Yardsale

[MattT]

Got a few bits and pieces I figured I'd offer up here before trying ebay.

Prices exclude shipping by USPS Priority Flat Rate or Regional Rate, with delivery confirmation, at cost. PM me your Zip code for a shipping quote.

USPS money order or Paypal Gift preferred for payment. I'll consider other methods on a case by case basis.

Click the pictures to open larger ones in a new tab or window.

Snap on T72 1/4" Ratchet. New-2010 date code. $35. SOLD.

NAPA NB56 3/8" drive Flex head Ratchet. Approx 24 tooth. Good used condition. $15. SOLD.






Snap on F10LB 3/8" Breaker bar. Good used. $23.

Snap on S12L 1/2" Sliding T Handle. Good used. $20. SOLD.

Proto 5463 1/2" 10" long Extension. Some chrome scuffing. $5. SOLD.




Snap on F4LB 3/8" Speeder with pin retainer. Good shape but does have a lazer engraved code on it. $15.

Proto 5280 3/8" Speeder. Good shape. $10.








Matco 10 piece 3/8" drive Metric socket set. 10mm thru' 19mm. The 15mm is older and doesn't have the blue size markings or off corner fastener engagement. Good used condition though some of the blue markings are worn. $50.








Matco 11 piece 3/8" drive SAE socket set. 3/8" thru' 1". The 9/16" has chipped chrome. The rest are good used but are lightly engraved. $40.








Matco WCL17M6 17mm 6 point Combo wrench. Good used condition. $8.

Matco WCL15M6 15mm 6 point Combo wrench. Good used condition. $7.

Snap on OEXM150 15mm 12 point Combo wrench. Good used condition with v. light engraving. $7.

MAC M15CW 15mm 12 point Combo wrench. Chrome worn thru' in places. $4.

Snap on 5/16" FDP OE/Ratcheting OE wrench. Also works on 8mm. Rare discontinued wrench in excellent shape th-wink $10.

Snap on OSHM70B 7mm 6 point Combo wrench. V Good condition barely used. $10.






Proto 712 12" Adjustable. Barely used but has been shadowboarded with red paint. $10. SOLD.

Williams AP-8X 8" "Superjustable". Good used. $6. SOLD.

Two Armstrong 25-226 13/16" 12 point Combo wrenches. Both good used condition. $5 each.

Armstrong 25-228 7/8" 12 point Combo wrench. Good used condition. $5. SOLD.





Continued on next post.

 

[MattT]

Continued.

Makita 14.4v Nicad Combo. 3/8" Drill, 1/2" Impact and Xenon Flashlight. The Impact is no powerhouse. It'll bust loose 4 wheeler lugs torqued to 50 ft-lb but struggles with car lugs. COO is china. Good condition and the batteries have been charged approx 10 times. $80.








Ingersoll Rand 1,200rpm 1/2" air drill model # 7816. It's a bit scuffed but runs well. One thing that's a little odd about it is the trigger is only held out with air pressure. I pulled up the parts schematic just to confirm there shouldn't be a spring in there. $30. SOLD.

http://www.irtechpubs.com/ir_pdfs/Tools/Vehicle%20Service%20Tools/Drills/16572729_ed1.pdf






Proto 292-R 10" Locking Pliers. Very good used condition. $7.






Blue Point PR-25 Internal Snap Ring Pliers. 9" long with 0.090" tips. Good condition but are engraved.

Blue Point PR-26 External Snap Ring Pliers. 9 3/8" long with 0.115" tips. Good condition.

$10 each or $18 for both. BOTH SOLD.






Ampro SAE Nut Driver set. 3/16", 1/4", 5/16" and 3/8". Good shape. No COO marking so probably asian. $5 for the set.




Fluke 80T-150U Temperature Probe. -50*C to +150*C. -58*F to 302*F. Plugs into a DMM set to mV DC and outputs 1mV per degree. Good condition. $40.






Mitutoyo 122-101 0-25mm x 0.01mm Blade micrometer. Mike is in good shape but the case isn't perfect. $40.







Heavy duty WH36FC Torch Handle with CA35 Cutting Attachment. Airgas claim these are made in the USA by Victor but there is no COO marking on either piece. The built in Flashback Arrestors do have VEC stamped on them though. UL listed. This is a big heavy torch just over 19" long assembled. That's why I'm selling it. It didn't look that big in the feebay pictures. In good shape and doesn't look to have seem much use. $80.

http://www.airgas.com/browse/productDetail.aspx?Category=401&product=RAD64003053

http://www.airgas.com/browse/productDetail.aspx?Category=401&product=rad64003050




Various USA punches and chisels. $2 each. ALL SOLD.

 

[Deafautotech]

i am interest on three wrenches :

Matco WCL17M6 17mm 6 point Combo wrench. Good used condition. $8.

Matco WCL15M6 15mm 6 point Combo wrench. Good used condition. $7.

Snap on OSHM70B 7mm 6 point Combo wrench. V Good condition barely used. $10.

how much for those as with shipped to Camby Indiana 46113?

 

[MattT]

i am interest on three wrenches :

Matco WCL17M6 17mm 6 point Combo wrench. Good used condition. $8.

Matco WCL15M6 15mm 6 point Combo wrench. Good used condition. $7.

Snap on OSHM70B 7mm 6 point Combo wrench. V Good condition barely used. $10.

how much for those as with shipped to Camby Indiana 46113?

Andy,

They can go in a flat rate envelope so $4.75.

 

[spoolgarage]

ill take the t72 Pm me shipped price.

 

[RobertMo1988]

How much for the
Snap on S12L 1/2" Sliding T Handle. Good used. $20.
Shipped to 95626

 

[MattT]

How much for the
Snap on S12L 1/2" Sliding T Handle. Good used. $20.
Shipped to 95626

That'll fit in a flat rate envelope so $4.75 for the ride.

 

[Dave532]

PM sent on the BP snap ring pliers.

-Dave532

 

[coldfusion21]

Pm sent on the two adjustable wrenches, 3/4" Armstrong along with the punches/chisels.

 

[sumner52000]

Sending Pm on these

NAPA NB56 3/8" drive Flex head Ratchet. Approx 24 tooth. Good used condition. $15.
Proto 5463 1/2" 10" long Extension. Some chrome scuffing. $5.

 

[joe (pa)]

I will take the 7816 air drill
shipping 17844

 

[sumner52000]

Got my ratchet and extension today. Well packaged and timely shipping.

Thanks.

matthew