You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
metal cut saw blade
- Thread starter joblo
- Start date
littletoes
Well-known member
This what your looking for?
http://www.google.com/products/cata...og_result&ct=result&resnum=2&ved=0CEsQ8wIwAQ#
http://www.google.com/products/cata...og_result&ct=result&resnum=2&ved=0CEsQ8wIwAQ#
What diameter saw blade are you looking for? Most of the 10"-14" blades have a max rpm of 1400. But there are some rated for higher. Post the size you need here.
The Freud Diablo 7-1/4" is rated for higher speed.
There are probably 9" blades available, but I haven't seen or used one. Here's an 8" blade that might work:
http://www.fastenal.com/web/products/detail.ex?sku=0235555&ucst=t
Keep in mind that it's a bad idea to use a metal cutting blade in a wood-cutting saw -- since wood-cutting saws do not have clamps to hold the material in place. Kick back from a piece of metal can very easily take a finger with it.
There are probably 9" blades available, but I haven't seen or used one. Here's an 8" blade that might work:
http://www.fastenal.com/web/products/detail.ex?sku=0235555&ucst=t
Keep in mind that it's a bad idea to use a metal cutting blade in a wood-cutting saw -- since wood-cutting saws do not have clamps to hold the material in place. Kick back from a piece of metal can very easily take a finger with it.
Here's an 8" blade that might work:
Just a note here: The blade Jack mentioned is sized for a 5/8 arbor, while most abrasive chop saws have a 1-inch arbor. Also, the depth of cut with an 8-inch blade would be greatly reduced over that of a standard 14-inch abrasive blade.