Metric Ratcheting Wrenches

[crash187]

like the title saids I'm looking for a set of ratcheting wrenches metric 8mm- to at least 18mm

 

[Octarine]

I've got a brand new set SOEXRM710 Snap on 10-19 for $200. Delivered within 30 miles of Chicago.

Mike

 

[impactims]

Stubby? Standard length? Long? One-way gear that you flip over for reverse or do you want a lever? Any particular brand? Open ended wrench on one end with ratcheting on the other or a ratcheting wrench on each end?

Surely you don't want just ANY kind of metric ratcheting wrenches.

I have a few sets I could sell, but not too sure which to offer since you havent provided any specifics.

 

[crash187]

Honesty I just want some that work and I can trade in if they break so c-man one way are fine but the ones with the lever are preferred and either/or on the ends

 

[Octarine]

Mine have the lever and in three years on the truck I only warrantied one 15mm which had obvious pipe marks on it.

 

[crash187]

octarine I am taking note of what you have but it is more than I need I don't need anything more than a c-man set on these
but your price is really nice

 

[camarotoolman]

Gear wrenches at Advance auto, they warrent the too.

 

[crash187]

Gear wrenches at Advance auto, they warrent the too.

I think you need to keep your receipt for those and I'm not very good at keeping mine

-crash

 

[camarotoolman]

so far they haven't asked, but they all know me cause I'm there alot buying parts for all my junk trucks and cars. The ink on the recept disapears, you really need to make a photo copy. Also goes aWAY IN THERE COMPUTER, sort of a rip off.

 

[crash187]

so far they haven't asked, but they all know me cause I'm there alot buying parts for all my junk trucks and cars. The ink on the recept disapears, you really need to make a photo copy. Also goes aWAY IN THERE COMPUTER, sort of a rip off.

I'm not really liked at my local advanced lol subaru guys and honda ricers don't mix it all so doesn't help that I showed up once in my buddies 470fwhp cobalt talking down their cars lol

-crash

 

[tooljunkie4]

I have a set of reversible (lever type) GearWrench combination wrenches. They go up to 19mm. Will have to check to see if they start at 8mm, or if they start at 10mm. I've found that I much prefer the flexible GearWrench combination wrenches for the things I do. These are available. I'll check on the range later today.

Their lifetime warranty does not require the retention of a receipt. There are bound to be other avenues for doing so, but I know firsthand that you can exercise it without trouble at any Sears hardware department, any Fastenal, or any NAPA auto parts store.

 

[crash187]

I have a set of reversible (lever type) GearWrench combination wrenches. They go up to 19mm. Will have to check to see if they start at 8mm, or if they start at 10mm. I've found that I much prefer the flexible GearWrench combination wrenches for the things I do. These are available. I'll check on the range later today.

Their lifetime warranty does not require the retention of a receipt. There are bound to be other avenues for doing so, but I know firsthand that you can exercise it without trouble at any Sears hardware department, any Fastenal, or any NAPA auto parts store.

Pm me price and pics of what you have and if you can a link to there warrenty


-crash

 

[crash187]

Bump I'm still looking for these

-crash

 

[buffalobill]

I have a set of Gearwrench Quadbox wrenches if you want them. They have 8, 10,12,13mm on one wrench, and 14,16,17,19 on the other wrench. lifetime warranty, just call the company directly if one is messed up, and they will send you another.

 

[crash187]

I have a set of Gearwrench Quadbox wrenches if you want them. They have 8, 10,12,13mm on one wrench, and 14,16,17,19 on the other wrench. lifetime warranty, just call the company directly if one is messed up, and they will send you another.

Pm me price and pics please

-crash

 

[buffalobill]

will do that tommorow, gotta go to work soon, 2nd shift.....

 

[crash187]

will do that tommorow, gotta go to work soon, 2nd shift.....

That's fine thanks

-crash

 

[crankshaftdan II]

Sear's is selling a 20 piece set in a plastic storage tray-made in tiawan-no china-and you can waranty them there as well-not sure on the sizes-they are combo (open on one end and ratchet on other) straight beam type -flip over style to reverse-1/2 sae & 1/2 metric-Price $49.99 + tax!

 

[BDBLK2K3]

I have a new set of Husky, unopened , flex ratcheting $45 .00 shipped .

 

[anythingfastxxx]

Still looking by chance? if so feel free to pm me!!