Milwaukee Power Tools Deal Permathread

[JeepsAreBuilt]

best price on Milwaukee 3/8 fuel ratchet 2557-20 ?

toolup.com has it for $150 plus Mil25($25 off), then $11 shipping makes it $136. I can get it cheaper on ebay nib shipped.

 

[z0r]

ebay is the best but wait over the weekend for a 15% coupon, my crystal ball is cloudy but it's been a while and they traditionally do one near thanksgiving

 

[Rusty67]

ebay is the best but wait over the weekend for a 15% coupon, my crystal ball is cloudy but it's been a while and they traditionally do one near thanksgiving

Ya, I was really hoping or an ebay 15% off this week sometime.

 

[BroncoAZ]

Not a super great deal. But, $25 is $25.


Today only:
https://www.toolnut.com/milwaukee-2...pact-wrench-with-friction-ring-tool-only.html

Coupon code Mil25
https://www.redtoolstore.com/produc...g-impact-wrench-bare-tool?variant=38189105798

Thanks for posting those. I’m looking for sub $150.

 

[Digital4n6]

If anyone still wants a rolling packout setup, I'd recommend Ace Hardware for the rolling bottom part at $90 (reg $120) and two of the large ones at $60 (reg $80) each for a lot of capacity. It's only $10 more than the standard setup with a difference of a large packout instead of a small organizer. Free shipping, too.

Rakuten gives you an additional 5% off.

 

[Jamie V]

The other is the M12 die grinder also from Toolup. Tax and shipping puts it at $149 shipped.

https://www.toolup.com/Milwaukee-2485-20-M12-FUEL-Right-Angle-Die-Grinder

I did the same and then just got an email for free shipping over $99 today after I paid shipping last night... so I just ordered it again and I’ll call them Monday and cancel the first order. That saved $10.40 shipping

 

[jimbos1ice]

If anyone still wants a rolling packout setup, I'd recommend Ace Hardware for the rolling bottom part at $90 (reg $120) and two of the large ones at $60 (reg $80) each for a lot of capacity. It's only $10 more than the standard setup with a difference of a large packout instead of a small organizer. Free shipping, too.

Rakuten gives you an additional 5% off.

If your near a Farm and Fleet they have the same deal on the packout rolling base


Sent from my iPhone using Tapatalk

 

[1TMF]

I did the same and then just got an email for free shipping over $99 today after I paid shipping last night... so I just ordered it again and I’ll call them Monday and cancel the first order. That saved $10.40 shipping

Argh, same here, just paid shipping yesterday. Do you know if tool up will actually cancel the order?

 

[DFB]

I did the same and then just got an email for free shipping over $99 today after I paid shipping last night... so I just ordered it again and I’ll call them Monday and cancel the first order. That saved $10.40 shipping

Thks for the heads up

Getting my 2554 M12 Chubby for $116 now

 

[MrSurly]

Anybody seen any 4 1/2" M18 grinders on sale?

https://www.cpooutlets.com/milwauke...e-switch-grinder--tool-only-/miln2780-20.html


CPO outlets at 139

 

[plinker]

Fleet farm has the 2557-20 3/8 fuel ratchet for 135$ currently with free shipping over 49$, not sure how good a deal it is but thought some may be interested.

https://www.fleetfarm.com/detail/milwaukee-m12-fuel-3-8-in-cordless-ratchet-tool-only/0000000313294?bc=Milwaukee

 

[BroncoAZ]

Thks for the heads up

Getting my 2554 M12 Chubby for $116 now

Me too, but mine was $129 with tax. This is my second 3/8” stubby, my first one is living in my “away” toolbox in my buddy’s car shop.

I decided against the M12 die grinder for now. For as infrequently as I use one I’ll just use my pneumatic die grinder if needed and save the $139.

 

[DFB]

Me too, but mine was $129 with tax. This is my second 3/8” stubby, my first one is living in my “away” toolbox in my buddy’s car shop.

I decided against the M12 die grinder for now. For as infrequently as I use one I’ll just use my pneumatic die grinder if needed and save the $139.

Ya death and taxes are inevitable

I had to pay $8.47 in sales tax also on my purchase so the honest out the door price was $124.58. Still that's a far cry from the original $179 list.

Haven't found the right deal I want anywhere yet even with certain promo discounts on the 2438 polisher/sander though. Mostly looking at either an XC kit or bare tool

 

[Flash21]

I searched but didn't see anything recent.

Any BF / CM Deals you guys see on the tool only:

M12 Compact Inflator 2475-20
M12 Fuel Hackzall 2520-20

I prefer tool only. I saw a recent post on the Hackzall but it was with another charger, bag and two batteries for $159 (now $179 at Acme)

 

[MrSurly]

Thanks for that!

I ordered the 0882-20 hand vac with this. This will be my first M18 tool; I have a Bunch of M12 stuff already.

Well, I'm waiting to see the oucome. I rec'd the bare tool today (btw: NOT discreetly packaged) but no sign of the starter kit. Will be trying to contact CPO for correction. I see that the starter kit is now sold out....and my order history is blank. I'm assuming they're swamped...should have resolution in a couple days.

 

[Bolster]

I'm assuming they're swamped....

I think that's a contributing reason there were few amazing BF deals. The economy is good, people are buying anyway, so why discount? Case in point, I bought anyway. An M18 fuel hackzall for $105, an M18 fuel impact for $76, a HO 3.0Ah for $50. None of them great deals.

 

[Jamie V]

Argh, same here, just paid shipping yesterday. Do you know if tool up will actually cancel the order?

No, I’m not 100% sure. But it’s a “pre order” so it shouldn’t be a problem.

 

[MrSurly]

Oh I’ve no complaint. The starter kit is a decent deal for -zero- bux. I think the clicks simply outran the shelf stock on them. I’m certain they’ll simply ship the kit as it comes in. No biggie.
Note that it was on the porch in all its Milwaukee red boxed glory... something to consider these days.
I’m starting to think I should have all pkgs “held at FedEx location” for safety.


Sent from my iPhone using Tapatalk

 

[JeepsAreBuilt]

best price on Milwaukee 3/8 fuel ratchet 2557-20 ?

toolup.com has it for $150 plus Mil25($25 off), then $11 shipping makes it $136. I can get it cheaper on ebay nib shipped.

I ordered this today from toolup.com for $125 total shipped, since they added free shipping over $99 today.

I dont think I could find a better deal on this one. I'll save the ebay 15% off for something else if I get it.

I already have the 1/4" fuel ratchet and I really like it. I got this one so I can put my 3/8" air ratchet away. If I like the fuel 3/8" I may have to find a deal on the 1/2" fuel ratchet. I was looking at the specs on the ratchets and compared them to the $napon ratchets and they were just in the middle of all the specs.. as far as torque and rpms go. So basically its more rpm but less torque or less rpm and more torque.

 

[DFB]

I searched but didn't see anything recent.

Any BF / CM Deals you guys see on the tool only:

M12 Compact Inflator 2475-20
M12 Fuel Hackzall 2520-20

I prefer tool only. I saw a recent post on the Hackzall but it was with another charger, bag and two batteries for $159 (now $179 at Acme)

Inflator only is $70.95 at ToolUp

M12 Fuel Hackzall tool is over $140 but can get $25 off

XC Kit still has free 6.0 battery offer should be only $140 if MIL25 promo applies

Today is free shipping

 

[DFB]

I ordered this today from toolup.com for $125 total shipped, since they added free shipping over $99 today.

I dont think I could find a better deal on this one.

Agree...not today/this weekend anyhow


I purchased 2557-20 about a month ago from HD was $149 with free 2.0 battery offer. Shipping also was free

Also felt that was good deal

But no longer available in that configuration for that price

 

[allinon72]

Can anyone point to a currently active deal that gets me into the M18 platform the cheapest? These package deals get quite confusing.

 

[danny_barkley]

Oh I’ve no complaint. The starter kit is a decent deal for -zero- bux. I think the clicks simply outran the shelf stock on them. I’m certain they’ll simply ship the kit as it comes in. No biggie.
Note that it was on the porch in all its Milwaukee red boxed glory... something to consider these days.
I’m starting to think I should have all pkgs “held at FedEx location” for safety.


Sent from my iPhone using Tapatalk

I can't quite make it out...

What's that bright red glowing thing on your porch?

 

[DFB]

Can anyone point to a currently active deal that gets me into the M18 platform the cheapest? These package deals get quite confusing.

Guess it depends what you tools want...and how much you want to spend


AND without piecing something together from various online sources


IMO probably the cheapest option to start with is a single tool offer right now, like a brushless drill or impact kit for only $99

Multi-Tool kit is also only just $99

All have a dual voltage charger, a single battery and a storage bag

Though a brushed drill and impact kit is only $149 so two tools and two batteries along with charger and storage bag makes it slightly better price

RA drill kit (1) battery/charger & hard style storage box is like a buckforty


Got start somewhere then can easily add more thru bare tool only buys or get free battery/tool offers with additional purchases. etc

 

[danny_barkley]

Can anyone point to a currently active deal that gets me into the M18 platform the cheapest? These package deals get quite confusing.

One of the guys here turned me onto the best tool deal IMO.

It is the 4 Tool packout kit. I was switching from Yellow to Red, so needed everything.

The Packout has 4 awesome Tools, all Fuel with 2 nice batts and a charger.

I got it at Acme on an 11% off deal.

$499 - 11% = $444 no tax and Free shipping

Sold the Packout for $75

$444 - $75 = $369 for (2) 5ah XC batts, Charger, Fuel 18v Hackzall, Fuel 18v 4 1/2" Grinder, Fuel 18v Hammer drill, Fuel 18v Impact driver. All the best offered in their categories and newest versions.

Then I've been adding the other single tools as sales came up.

$369 for 2 Batts and four essential tools is pretty good IMO.

 

[allinon72]

Guess it depends what you tools want...and how much you want to spend


AND without piecing something together from various online sources


IMO probably the cheapest option to start with is a single tool offer right now, like a brushless drill or impact kit for only $99

Multi-Tool kit is also only just $99

All have a dual voltage charger, a single battery and a storage bag

Though a brushed drill and impact kit is only $149 so two tools and two batteries along with charger and storage bag makes it slightly better price

RA drill kit (1) battery/charger & hard style storage box is like a buckforty


Got start somewhere then can easily add more thru bare tool only buys or get free battery/tool offers with additional purchases. etc

I need basically everything, so the tool combination really doesn't matter to me unless it's some obscure tool. Looking to eventually acquire drill, 1/2" impact, 1/2" driver, sawzall, circular saw, LED light of some kind, angle grinder, etc. And I forgot to mention that the tools must be Fuel in any kit that I buy.

One of the guys here turned me onto the best tool deal IMO.

It is the 4 Tool packout kit. I was switching from Yellow to Red, so needed everything.

The Packout has 4 awesome Tools, all Fuel with 2 nice batts and a charger.

I got it at Acme on an 11% off deal.

$499 - 11% = $444 no tax and Free shipping

Sold the Packout for $75

$444 - $75 = $369 for (2) 5ah XC batts, Charger, Fuel 18v Hackzall, Fuel 18v 4 1/2" Grinder, Fuel 18v Hammer drill, Fuel 18v Impact driver. All the best offered in their categories and newest versions.

Then I've been adding the other single tools as sales came up.

$369 for 2 Batts and four essential tools is pretty good IMO.

I'm in the same boat - replacing old Dewalt 18v. I'll check into that deal, thanks.

 

[DFB]

I need basically everything, so the tool combination really doesn't matter to me unless it's some obscure tool. Looking to eventually acquire drill, 1/2" impact, 1/2" driver, sawzall, circular saw, LED light of some kind, angle grinder, etc. And I forgot to mention that the tools must be Fuel in any kit that I buy.

Well if it just that you want I'd go buy the larger 7 tool Fuel kit and be done with it

Stack a discount on it

https://www.homedepot.com/p/Milwauk...5-0-Ah-Batteries-2997-27-48-11-1852/308088150

 

[allinon72]

Well if it just that you want I'd go buy the larger 7 tool Fuel kit and be done with it

Stack a discount on it

https://www.homedepot.com/p/Milwauk...5-0-Ah-Batteries-2997-27-48-11-1852/308088150

What discount would stack on it? I can't find one.

 

[2barevo]

Anyone come across a deal on the angle die grinder?

Sent from my ONEPLUS A6013 using Tapatalk

 

[Jamie V]

Anyone come across a deal on the angle die grinder?

Sent from my ONEPLUS A6013 using Tapatalk

Post #3760 and #3766

 

[JeepsAreBuilt]

Thks for the heads up

Getting my 2554 M12 Chubby for $116 now

How'd you get that for $116 ? Toolup.com has it for $179 before the $25 off.

 

[danny_barkley]

How'd you get that for $116 ? Toolup.com has it for $179 before the $25 off.

I got mine for $110 NIB off Ebay

 

[HondaCBMan]

How'd you get that for $116 ? Toolup.com has it for $179 before the $25 off.

They had it for $141 before the $25 off on Black Friday and early Saturday (when the free shipping kicked in). I missed out.

 

[2manytools]

$444 - $75 = $369 for (2) 5ah XC batts, Charger, Fuel 18v Hackzall, Fuel 18v 4 1/2" Grinder, Fuel 18v Hammer drill, Fuel 18v Impact driver. All the best offered in their categories and newest versions.

The grinder is actually low man on the Fuel totem pole. You have 2783 which came out near the same time as the 2780, but is tool-less & has a brake. Then they just came out with the 2980-20, that takes advantage of High-Output batteries, and is rated as a 13amp equivalent grinder. This is also tool-less & has a brake. While much better than the brushed grinder & more than enough for most, it is not the latest or greatest anymore.

There is also the 7/9in grinder, but I’d put that in separate category, as that is a whole different size disc that is used.

 

[DFB]

What discount would stack on it? I can't find one.

Ya I did some looking around and it does seem that the current $849 price with the extras either two batteries, a jigsaw or tower light (ur choice there) is about as good as it's ever gonna get right now.

CPO has it for that price also as does Toolup but neither checkout would take the MIL25 promo code.

Reg list price is now like $999 on that kit alone with no add on's so all combined it's pretty good deal IMO and be hard pressed to price match everything offered by piece mealing it all together some other way.

I do see HD will give a $100 off $1000 on a qualifying purchase by applying for their store credit Only $25 off under $999 though

 

[DFB]

How'd you get that for $116 ? Toolup.com has it for $179 before the $25 off.

They had it for $141 before the $25 off on Black Friday and early Saturday (when the free shipping kicked in). I missed out.

Yup that was it...is the $141 offer over now

Man I'm telling ya some of the deals go fast like the 2520 -21 XC and free 6.0 battery for what was it $117?

Ya snooze ya lose... like I did with that "free" high torque from Blaines

 

[HondaCBMan]

Last i checked it wasn't even in stock anymore.

 

[Tbird22]

I also had an unpleasant experience with toolup. Firstly, they offered free shipping on 99 bucks on Saturday, I paid 10 dollars shipping on Friday. Secondly, they sent me an email I need to wire transfer money to them. Never heard of something shadier and I refuse to do that. Won’t be open until tomorrow to hear some ridiculous excuse as to what the hell happened. Maybe I’ll get free shipping out of it though...


Sent from my iPhone using Garage Journal

 

[danny_barkley]

The grinder is actually low man on the Fuel totem pole. You have 2783 which came out near the same time as the 2780, but is tool-less & has a brake. Then they just came out with the 2980-20, that takes advantage of High-Output batteries, and is rated as a 13amp equivalent grinder. This is also tool-less & has a brake. While much better than the brushed grinder & more than enough for most, it is not the latest or greatest anymore.

There is also the 7/9in grinder, but I’d put that in separate category, as that is a whole different size disc that is used.

Thanx for the update on the grinders. Very interesting

 

[The One]

Any sales on the m18 bandsaw?