Milwaukee Power Tools Deal Permathread

[FloorPaint]

Here are two deals that I haven't seen posted here before. I saw them tonight at the Home Depot in Springfield, VA:
1. Drywall Screwdriver, tool #6742-20 for $64.00 (was $89.00)
2. Jobsite Tech Bag - I haven't seen these at all before, and they didn't seem to have a traditional Milwaukee part number, so I took a close-up of the price tag; Was $99.97, marked down to $77.00

 

[Christx95]

I got lucky. Got this in a lot with battery bag and charger for 49 bucks at the local hardware store

That is a really good deal. I wish I could have found that. But I’m happy with the 30% considering it was said to not be available.


Sent from my iPhone using Tapatalk

 

[1320]

Wow how did you manage that? I tried that code just for S&G but no luck.

Dave

I sent an email just after the coupon expired asking if I could still get the coupon price and they said yes. I figured it wouldn't hurt to ask.

 

[a52-830]

cpo is offering money off recon tools. 10$ off 100$ or more, as an example.

note that cpomilwaukee.com does not offer the deal, while cpooutlets.com does.

fortunately, cpooutlets.com also offers free shipping for orders greater the 49$, while cpomilwaukee.com is greater than 199$.

prices appear to the be same on both sites.

 

[swaps]

Every Milwaukee tool kit I have gotten have had the battery in the hard case or in the bag, never in a retail box. How are you guys getting retail batteries unless its a Milwaukee direct special?

Thanks
Dave

Home depot had a display with the packout case and then a pile of the 9ah batteries in retail packaging. I returned the battery for ~130 back.

 

[8mpg]

Wow that's great. How did 8MPG get the light, 5.0 and charger for $160? I see it for $199 bare tool and w/ a 9.0 $549. I'd love to try one of these out.

They were running 20% off any M18 tool $199 or more. That light also had a promo of free battery/charger with purchase of light. Just happened to work out perfect.!

 

[Sh40674]

I gotta start bidding on eBay more often.. haven't in forever. Just got a new charger and 2 new 3.0 batteries for 87 shipped. Needed a 2nd charger, figure they're worth a 20 dollar bill. 34 bucks each for the batteries ain't bad at all

 

[fastjohnny]

They were running 20% off any M18 tool $199 or more. That light also had a promo of free battery/charger with purchase of light. Just happened to work out perfect.!

Still 169 at rural king with 4.0aH battery and charger

 

[BeardBro]

Fleet Farm has $20 off all M18 bare tools and $25 off all M18 Fuel bare tools. Their selection isn't great, but I picked up the M18 vacuum (0880-20) for $79 vs. $89 at Home Depot and $99 nearly everywhere else.

Just did this same thing. I was able to stack the $10 off of $75 coupon from another Fleet Farm purchase last week. Dropped the price to $69.

 

[ScottsGT]

Was that vacuum the old style or the new style? They have the same part number.

 

[BeardBro]

Was that vacuum the old style or the new style? They have the same part number.

It was the new style with the non-moving handle. Has some heft to it.

 

[Crazyjake8493]

cpo is offering money off recon tools. 10$ off 100$ or more, as an example.

note that cpomilwaukee.com does not offer the deal, while cpooutlets.com does.

fortunately, cpooutlets.com also offers free shipping for orders greater the 49$, while cpomilwaukee.com is greater than 199$.

prices appear to the be same on both sites.

Thanks for posting that! You got me looking on there the other night and decided to take a chance on an M18 Fuel 7-1/4" circular saw, got it for $139 with free shipping, should be here next week.

 

[Tduby]

Thanks for posting that! You got me looking on there the other night and decided to take a chance on an M18 Fuel 7-1/4" circular saw, got it for $139 with free shipping, should be here next week.

Wish I could get the 6.5 fuel for that price

 

[a52-830]

Wish I could get the 6.5 fuel for that price

do you mean this?

https://www.cpooutlets.com/milwauke...r-saw--bare-tool-/miln2530-20,default,pd.html

the recon:

https://www.cpooutlets.com/factory-...r-saw--bare-tool-/milr2530-80,default,pd.html

is 119$, save an additional 10$ for a limited time using the code:

SAVERECON

by using the general site, you get free shipping for either.

 

[DFB]

do you mean this?

https://www.cpooutlets.com/milwauke...r-saw--bare-tool-/miln2530-20,default,pd.html

the recon:

https://www.cpooutlets.com/factory-...r-saw--bare-tool-/milr2530-80,default,pd.html

is 119$, save an additional 10$ for a limited time using the code:

SAVERECON


by using the general site, you get free shipping for either.

That's the M12 FUEL 5 3/8" saw you linked


No he means the 6 1/2 M18 FUEL

https://www.cpooutlets.com/milwauke...r-saw--bare-tool-/miln2730-20,default,pd.html

Tduby I also want one at a deep discount price like THAT!

 

[Crazyjake8493]

I was looking at both the Fuel 6-1/2 and 7-1/4 saws at Home Depot the other day, I'm just used to a right side blade and many more options for 7-1/4" blades. Once I saw the recon deal it was a no brainer.

 

[DFB]

I was looking at both the Fuel 6-1/2 and 7-1/4 saws at Home Depot the other day, I'm just used to a right side blade and many more options for 7-1/4" blades. Once I saw the recon deal it was a no brainer.

Fuel 7 1/4 is really great saw. Plenty of power It such a joy to use over my corded Makita 5007 which have had like forever.


I have an older cordless Makita 6 1/2" I use often still. Its always been a good saw for trim work, small and light weight. The older batteries just aren't as good as new ones though I have been thinking of running it the newest Lion with the adapter that's sold for that. But buying all that is getting too close to cost of new bare tool circ saw from Milwaukee anyhow so I just keep running it the way it is

All depends what you need.

I need 6 1 /2 FUEL

Always looking to see I can get a good $50 or more off retail list on that

 

[csmitty]

Thanks for posting that! You got me looking on there the other night and decided to take a chance on an M18 Fuel 7-1/4" circular saw, got it for $139 with free shipping, should be here next week.

If you have a Home Depot near by check and see if they have any of the promo kits with the Fuel 7-1/4 and 9.0 battery. Those were down to $63 most places. Some $125.

 

[JimH74]

I would sure love to find one of those M18 7&1/4 circular saws. None available around me in Texas.

 

[Crazyjake8493]

If you have a Home Depot near by check and see if they have any of the promo kits with the Fuel 7-1/4 and 9.0 battery. Those were down to $63 most places. Some $125.

No luck, I'm in there 3-4 times a week to buy supplies and look for deals. Never any deals like I see posted on here. Either the employees are smart and swipe them up, or the clearance in our area differs. I don't even remember seeing the saws with 9.0 batteries as kits in our store at all.

 

[Crazyjake8493]

Fuel 7 1/4 is really great saw. Plenty of power It such a joy to use over my corded Makita 5007 which have had like forever.

Good to know! It'll be here Thursday. I was nervous about getting a reconditioned tool, but hopefully I'll get a good one.

 

[DFB]

Good to know! It'll be here Thursday. I was nervous about getting a reconditioned tool, but hopefully I'll get a good one.

I hope you do I tried a recon 6 1/2" brushed circular saw a couple of years ago but returned it. The bevel guide markings were completely off with no way to adjust them. Other than that the saw worked fine. If it was just beater a person could have made a couple of new marks like at 45* with a scribe or marking pen I guess for a quick reference. Of course for accuracy use a speed square or sliding bevel.

The savings was like $89 vs the $119 for new. For me it wasn't worth it

 

[Crazyjake8493]

I hope you do I tried a recon 6 1/2" brushed circular saw a couple of years ago but returned it. The bevel guide markings were completely off with no way to adjust them. Other than that the saw worked fine. If it was just beater a person could have made a couple of new marks like at 45* with a scribe or marking pen I guess for a quick reference. Of course for accuracy use a speed square or sliding bevel.

The savings was like $89 vs the $119 for new. For me it wasn't worth it

At that small difference a new one is worth the extra cost. I got the 7-1/4 Fuel saw for $100 cheaper. I've heard some people get reconditioned tools that are beat up, and others could've very well just been an open box return that was used once or twice, or not at all. If I don't get a good one, I'll return it and buy a new one with a 9.0ah battery for $249.

 

[Mctiger1985]

Price dropped to $88.03 at HD

 

[DFB]

At that small difference a new one is worth the extra cost. I got the 7-1/4 Fuel saw for $100 cheaper. I've heard some people get reconditioned tools that are beat up, and others could've very well just been an open box return that was used once or twice, or not at all. If I don't get a good one, I'll return it and buy a new one with a 9.0ah battery for $249.

Ya find the best deal. I had gotten the saw and 9.0 for $199 with an ACME promo last year


That was my only recon issue I also have a 2401 screwdriver that was a recon...works perfect

 

[purplezr2]

Price dropped to $88.03 at HD

Wish my HD would have deals like this. I want one of these kinda.

My home depot never has any deals I feel like

 

[BeardBro]

Just a heads up, CPO via Ebay has 20% off tools today. Promo code PREP4SUMMER. Their prices are a little inflated, but there are some deals to be had. You can pick up that new M12 rivet gun for $135.

 

[ScottsGT]

Wow, 2767-20 Impact for $187 shipped. Almost pulled the trigger. Hard to justify with top of the line IR pneumatic sitting in my box and a 60 gallon air compressor in the corner. I've needed this battery operated impact once in my lifetime. Can't do it. If I needed it twice, it would be a done deal.

 

[2manytools]

Wow, 2767-20 Impact for $187 shipped. Almost pulled the trigger. Hard to justify with top of the line IR pneumatic sitting in my box and a 60 gallon air compressor in the corner. I've needed this battery operated impact once in my lifetime. Can't do it. If I needed it twice, it would be a done deal.

I cancelled my One-Key version that I ordered from Acme last week. Realized I did not need that much power 99%+ of the time. Think I'm going to grab the Mid-Torque model, though I wish they had it in a One-Key version (most of my other tools are, so might as well).

CPO raised the prices of a few items it looks like. Before they were inline with all the other major sellers, but now are a few dollars more. Way to offer a coupon

 

[ScottsGT]

CPO always played that game. it's why I unsubscribed to their junk email.

 

[TT_Vert]

Just a heads up, CPO via Ebay[/URL] has 20% off tools today. Promo code PREP4SUMMER. Their prices are a little inflated, but there are some deals to be had. You can pick up that new M12 rivet gun for $135.

Inflated is an understatement. Their remaned grinder is more than new.
Dave

 

[a52-830]

Just a heads up, CPO via Ebay has 20% off tools today. Promo code PREP4SUMMER. Their prices are a little inflated, but there are some deals to be had.

thanx. got an m18 die grinder for 40$ off.

 

[LXCam]

Inflated is an understatement. Their remaned grinder is more than new.
Dave

Ya I've noticed that too lately. The remanned stuff used to have some occasional deals. But compared to HD prices it's a wash.

thanx. got an m18 die grinder for 40$ off.

And thanks from me as well. All though the only money I saved today was tax, it was something I guess.


I've been jonesing for a 9.0 battery. Last week I kept dicking around not buying the trimmer/leaf blower with batt for three bills. Literally the day I decided to just do it, the sale ended. And that night I happened to find a good deal on the blower as a bare tool. So today's purchase is the grinder kit. As much as I wanted a grinder, it was damn hard justifying another one since I own 6 corded ones. But I'm certain this will come in handy someday

 

[nix377]

Ya I've noticed that too lately. The remanned stuff used to have some occasional deals. But compared to HD prices it's a wash.




And thanks from me as well. All though the only money I saved today was tax, it was something I guess.


I've been jonesing for a 9.0 battery. Last week I kept dicking around not buying the trimmer/leaf blower with batt for three bills. Literally the day I decided to just do it, the sale ended. And that night I happened to find a good deal on the blower as a bare tool. So today's purchase is the grinder kit. As much as I wanted a grinder, it was damn hard justifying another one since I own 6 corded ones. But I'm certain this will come in handy someday

I did the exact same thing and waited too long. I’m assuming we won’t see that deal again until next spring

 

[LXCam]

I did the exact same thing and waited too long. I’m assuming we won’t see that deal again until next spring

Probably huh, the only thing that held me back is I just didn't need the weed wacker.

 

[ThatSickRip]

I did the exact same thing and waited too long. I’m assuming we won’t see that deal again until next spring

Probably huh, the only thing that held me back is I just didn't need the weed wacker.

I did the same thing last year, but it was in June around Fathers Day for the weed eater/hedge trimmer (have a small Hitachi gas one). Id bet they run it again this year, then done. I was ticked I missed it year, but I found a great deal shortly after on the hedge trimmer and 9.0 comb0. Then I grabbed the deal this year on the weed wacker/blower, even though I already have the gas blower. Ive been very impressed with all 3 OPE tools. The blower is on garage/driveway/patio duty for quick clean up, and the gas will still be used for the harder work in the yard.

 

[isuhunter]

Looking for 2 things:

M18 paddle fuel grinder

M18 blower

Thoughts on good prices or times/places to buy?

 

[LXCam]

Looking for 2 things:

M18 paddle fuel grinder

M18 blower

Thoughts on good prices or times/places to buy?

Yesterday was the day to get the grinder with the 20 off. I was ~240 out the door shipped with the 9.0 battery. The latest blower I got off eBay for 140 shipped but depot has a sale right now for the last generation one for 123 plus tax.

If you'd like a link for the eBay one I bought let me know and I'll pull that up in a while and post it.

Looks like my guy is out, but I found another for the same price.

https://m.ebay.com/itm/Milwaukee-M18-Leaf-Blower-Bare-Tool-2724-20-BRAND-NEW/222917255823

 

[ScottsGT]

If you have the eBay app on your phone there is a 15% discount good until 1 PM Pacific time. On everything but gold, coins, etc.
Gotta spend at least $50 or more.

PLAN2SAVE

 

[2manytools]

Looking for 2 things:

M18 paddle fuel grinder

M18 blower

Thoughts on good prices or times/places to buy?

The 20% off is still working at CPO until 5/1 on ebay. code PREP4SUMMER

https://www.ebay.com/itm/Milwaukee-...ing-Angle-Grinder-BT-2783-20-New/282482660374


Could get this for 15% off until 1pm PST through ebay, maybe even make a lower offer if he responds fast enough:

https://www.ebay.com/itm/Milwaukee-...-18V-Lithium-9Ah-Battery-Charger/123090286174

not new in box, but great deal after 15% off:

https://www.ebay.com/itm/New-Milwau...hless-Grinder-4-1-2-5-Paddle-18V/152998623814

I PM'ed you about the blower