To avoid these ads, REGISTER NOW!

Milwaukee Power Tools Deal Permathread

To avoid these ads, REGISTER NOW!

1320

Well-known member
Joined
Jan 3, 2018
Messages
899
Location
Arizona
Where is the best place to get the mid torque boot? I am seeing $32 shipped on eBay and about the same on carid.com.
 

2manytools

Well-known member
Joined
Feb 2, 2016
Messages
4,330
Location
Mt Pleasant, MI
Where is the best place to get the mid torque boot? I am seeing $32 shipped on eBay and about the same on carid.com.

I've never seen anything below retail on the boots, unless you find it for retail on ebay & are able to apply a coupon (or on tool sites, but hard to find free shipping). I'm probably going to buy through HD, as I can use gift cards & it very well could be on my doorstep tomorrow
 

Ign

Well-known member
Joined
Jul 7, 2006
Messages
12,769
Location
Butte Peak ND
acmetools.com is offering 20$ off "most" purchases over 100$. just bought a 2360-20 light for 109$. code is "save20", expires 23May18.

Yep and this looks like a great way to go on any of the free M12 6.0 promo kits.

I just ordered the M12 bandsaw kit w free 6.0 for $179

Also the 2598-22 second gen drill and impact driver w free 6.0 for $179
 

nix377

Well-known member
Joined
Dec 19, 2017
Messages
62
Yep and this looks like a great way to go on any of the free M12 6.0 promo kits.

I just ordered the M12 bandsaw kit w free 6.0 for $179

Also the 2598-22 second gen drill and impact driver w free 6.0 for $179

I went to acme's site and couldn't find the 3598-22 promo kit with the free 6.0, what am I doing wrong?
 

1320

Well-known member
Joined
Jan 3, 2018
Messages
899
Location
Arizona
Dang, did the CPO Outlet M18 Fuel kit deal end? I missed out and that seemed like the best deal I've ever seen on Milwaukee stuff...
 

2manytools

Well-known member
Joined
Feb 2, 2016
Messages
4,330
Location
Mt Pleasant, MI
Dang, did the CPO Outlet M18 Fuel kit deal end? I missed out and that seemed like the best deal I've ever seen on Milwaukee stuff...

M18 Fuel Kit? only a few hundred that potentially be? You probably aren't talking about a force-logic press, but really no idea which one you are talking about, otherwise we could better comment on the deal
 

1320

Well-known member
Joined
Jan 3, 2018
Messages
899
Location
Arizona
M18 Fuel Kit? only a few hundred that potentially be? You probably aren't talking about a force-logic press, but really no idea which one you are talking about, otherwise we could better comment on the deal

Hmm, no doubt. 😀

It was buy two M18 Fuel bare tools and get two 5.0 batteries, one 9.0 battery, a rapid charger, and a Milwaukee bag.
 

2manytools

Well-known member
Joined
Feb 2, 2016
Messages
4,330
Location
Mt Pleasant, MI
Hmm, no doubt. 😀

It was buy two M18 Fuel bare tools and get two 5.0 batteries, one 9.0 battery, a rapid charger, and a Milwaukee bag.

I was just looking at that, and it is still on acme's website. Said it goes til 6/31 or 7/31. I would imagine CPO would still be offering it as well, but don't have time to look at the moment
 

1320

Well-known member
Joined
Jan 3, 2018
Messages
899
Location
Arizona
I was just looking at that, and it is still on acme's website. Said it goes til 6/31 or 7/31. I would imagine CPO would still be offering it as well, but don't have time to look at the moment

It looks like Acme is doing a bag and either two 5.0s or a 9.0 and a rapid charger. CPO's deal was a bag, two 5.0s and a 9.0 and rapid charger. Maybe that's why it's gone, I think these deals are extensions of Milwaukee factory rebates anyways, maybe CPO got it wrong. I should have ordered back on Sunday.
 

Tduby

Well-known member
Joined
Apr 5, 2016
Messages
496
Location
Da U.P.
It looks like Acme is doing a bag and either two 5.0s or a 9.0 and a rapid charger. CPO's deal was a bag, two 5.0s and a 9.0 and rapid charger. Maybe that's why it's gone, I think these deals are extensions of Milwaukee factory rebates anyways, maybe CPO got it wrong. I should have ordered back on Sunday.

That’s why I pointed it out and ordered asap because everyone else is or and CPO is and.
 

2manytools

Well-known member
Joined
Feb 2, 2016
Messages
4,330
Location
Mt Pleasant, MI
Gotta be quick for the good deals!

Quick usually, but need to be aware to begin with.

I went back and saw that i was mentioned, and one person replied to it. So many posts that you end up missing some. That was a good deal, you guys should have been bragging more, got our attention (font sized that and to a 7, LOL). Even I was on the CPO site in that time frame, and I never noticed the and. I was seeing if anyone else had a better deal than HD. The tools sites seem to have that advantage as there a a few tools not in the bundles through HD

I'll save my money fo the chainsaw. new motto
 

backskipper

Active member
Joined
Dec 15, 2014
Messages
35
I saw Acme's deal then went to CPO and thought it was the same. Dang. I'm glad I waited a while on the blower+trimmer deal though because I got it for $280 now that Acme has the 20 off 100 coupon.
 
To avoid these ads, REGISTER NOW!

Mike my

Active member
Joined
Apr 23, 2013
Messages
27
The 0886 M18 jobsite fan is $59 a few places, back ordered but still taking orders. Northern Tool, Acme, toolbarn has stock but no free shipping.

I was picking one up for camping and thought $59 was a lot more palatable than the normal $79.
 

W_E_S

Well-known member
Joined
Nov 6, 2015
Messages
320
The 0886 M18 jobsite fan is $59 a few places, back ordered but still taking orders. Northern Tool, Acme, toolbarn has stock but no free shipping.

I was picking one up for camping and thought $59 was a lot more palatable than the normal $79.
Grab a 9AH battery and it will literally run all night long (and then some). I use it for the same thing.
 

ScottsGT

Well-known member
Joined
Jan 1, 2014
Messages
4,883
Location
Lake Wateree, SC
Picked up the fan a couple weeks ago when the sale price first came out. This is one great tool!
Acme sent an email today with a $20 off code for any purchases $100 and up. Put the new Milwaukee M18 HEPA vac at $99 in my shopping cart and then found a replacement gasket or seal for $1.09 and added it for the discount.
So now I have the vac on the way for $80 shipped.
 

1320

Well-known member
Joined
Jan 3, 2018
Messages
899
Location
Arizona
The 0886 M18 jobsite fan is $59 a few places, back ordered but still taking orders. Northern Tool, Acme, toolbarn has stock but no free shipping.

I was picking one up for camping and thought $59 was a lot more palatable than the normal $79.

I'm still waiting for mine from Northern from a few weeks ago... Maybe I should call them.
 

ScottsGT

Well-known member
Joined
Jan 1, 2014
Messages
4,883
Location
Lake Wateree, SC
Yes, follow up. I got mine from Northern as well. Came right away.

I will add that I had difficulty getting the battery packs in and out. I finally took a jewelers file and filed down the tracks the battery slide in on to make it user friendly. It was so tight, I had to use a screwdriver to pry the battery out while pressing in the release buttons. My 9.0 was a little tighter than the 5.0, but I can pull them out now without using a tool to pry them out.
 

Odd-job

Well-known member
Joined
Aug 13, 2017
Messages
2,259
Location
SF Bay Area
Thanks to the eBay thread I finally picked up the m18 miter saw with a 9.0 battery from CPO outlets. Layer in the coupon code PMEMDAY for an additional $50 off. Would have been $350 out the door if I didn’t have to pay CA sales tax.

Please note it is reconditioned if that type of stuff bothers you.
 

Jamie V

Well-known member
Joined
Jun 10, 2012
Messages
1,059
Location
Atco, NJ
Just ordered another M18 string trimmer kit with free hedge trimmer for a coworker from Acme Tools with a 10% off code (MEMORIALDAY) and got them for $269.10 no tax, no shipping.
 

blindjoe

New member
Joined
Jul 13, 2009
Messages
1
Just ordered another M18 string trimmer kit with free hedge trimmer for a coworker from Acme Tools with a 10% off code (MEMORIALDAY) and got them for $269.10 no tax, no shipping.

Link for this? I am having trouble finding the kit.

e: Found it, its under the price as others have mentioned, and lets you choose your free tool when you check out.
 
Last edited:

1320

Well-known member
Joined
Jan 3, 2018
Messages
899
Location
Arizona
Yes, follow up. I got mine from Northern as well. Came right away.

I will add that I had difficulty getting the battery packs in and out. I finally took a jewelers file and filed down the tracks the battery slide in on to make it user friendly. It was so tight, I had to use a screwdriver to pry the battery out while pressing in the release buttons. My 9.0 was a little tighter than the 5.0, but I can pull them out now without using a tool to pry them out.

They sent me a tracking number this morning. I'll keep that in mind about the battery, thanks.
 

2manytools

Well-known member
Joined
Feb 2, 2016
Messages
4,330
Location
Mt Pleasant, MI
No one else finds the Milwaukee fan having a slightly high pitch whirl to it? I ended up returning mine after finding it louder than the Ryobi, and it doesn't use a real extension cord. Man, I'd rather keep it all red. Decisions
 

Jamie V

Well-known member
Joined
Jun 10, 2012
Messages
1,059
Location
Atco, NJ
I have 3 of those fans in my kids bedrooms for at night. They are great especially when the power goes out and I can just pop a battery in them so they keep sleeping. BUT after a while of running them for 8hrs a night (every night) they start to develop this rattling sound. They only have a 1 year warranty so it’s usually after the warranty ends that this happens so I’m SOL. They never stop working but it would be nice if they could upgrade whatever causes this issue (I’m assuming it’s the bearings in the motor)
 
OP
A

a52-830

Well-known member
Joined
May 28, 2016
Messages
4,644
Location
north of boston, massachusetts
i dropped by home depot today because i read somewhere (here?) that the 2361 light was on sale for 50$ at some stores. not at mine.

i found that "the smallest store in the district" got some more 2130-20's in stock. the sticker on the shelf is yellow, and lists them for 149$ (regularly 199$).

mixed in was one 2135-20, but no shelf sticker. i scanned it, and it came up as 200$. they only ever had one, and clearanced it out for 200$ months ago.

so, for reasons known only to HD and Milwaukee, they shipped more 2130's to a store which was already clearancing them out. then, for some reason, they added one 2135 to the shipment (maybe that is the default setting, send three 2130's and one 2135).

a clerk saw me, and pointed out that this one was different, and was 499$. he scanned it on his handheld, and showed me the screen, trying to be helpful that i wasn't getting the 149$ one. i showed him the sticker i printed from the price checker station. his jaw fell. i assume his handheld is getting data off the corporate site. i have a feeling that had he realized it was on sale, it would have not been there for me to check.

dont know if this is happening at your stores, but if it was one of the stores that clearanced these lights out months ago, might be worth swinging by and seeing what has shown up . . . .
 

cajunfirehawk

Well-known member
Joined
Nov 29, 2011
Messages
2,566
Location
Ms Gulf Coast
1/4" 2456-21 ratchet. $99.00 cheapest I've seen this
i added a line level to get the total over $100 and qualify for free shipping.
https://www.toolnut.com/milwaukee-2456-21-m12-cordless-1-4-ratchet-1-5ah-kit-w-packout-case.html

Cant believe no one commented on this :shocking:, this deal comes with a a free pack out box, charger and battery
2456-21po.jpg

I got in on it early and already got my tracking info, its shows on back order now but they will honor the $99 price until the days end, I love my 3/8" so much I had to have a 1/4" :beer:https://www.toolnut.com/milwaukee-2...+Packout&utm_campaign=March+2018+Ending+Deals
 

APS2000

Well-known member
Joined
Jun 20, 2017
Messages
239

APS2000

Well-known member
Joined
Jun 20, 2017
Messages
239
^ it was there to join their mailing list. Not sure of it's still there. Try this code: OFLLMRR
 
To avoid these ads, REGISTER NOW!
Top Bottom