Milwaukee Power Tools Deal Permathread

[2manytools]

I'd rather get the HD deal but I can’t seem to find it.

Still works in store. Signage should still be up at one of the front end caps.

 

[Digital4n6]

Sorry for the quality, but this is on the endcap.

Sent from my PH-1 using Tapatalk

 

[ren71]

Still works in store. Signage should still be up at one of the front end caps.

You’re correct, still available in the store.

 

[ren71]

Sorry for the quality, but this is on the endcap.

Sent from my PH-1 using Tapatalk

Thanks I was able to pick one up today, now I have to cancel my Toolup order

 

[Bolster]

From Slickdeals: M12 12-Volt Lithium-Ion Cordless Oscillating Multi-Tool and Impact Driver Combo Kit (2-Tool) with Battery and Charger - $99
https://www.homedepot.com/p/Milwauk...-with-Battery-and-Charger-2462-21MT/310343044

Weep for me. I only do M18.

 

[DFB]

From Slickdeals: M12 12-Volt Lithium-Ion Cordless Oscillating Multi-Tool and Impact Driver Combo Kit (2-Tool) with Battery and Charger - $99
https://www.homedepot.com/p/Milwauk...-with-Battery-and-Charger-2462-21MT/310343044

A steal of a deal!

 

[MrSurly]

A steal of a deal!

The link opens the page but the bottom (buying details) doesnt load

I get this: "Sorry, but we ran into issues loading these options. Please try refreshing."

There are three other set deals at the bottom of the page but they get the same error for me

 

[dodge610]

The link opens the page but the bottom (buying details) doesnt load

I get this: "Sorry, but we ran into issues loading these options. Please try refreshing."

Just tried it out of stock now. None in stores or online.

 

[DFB]

The link opens the page but the bottom (buying details) doesnt load

I get this: "Sorry, but we ran into issues loading these options. Please try refreshing."

There are three other set deals at the bottom of the page but they get the same error for me

I just looked again and see its out stock online NOW and not available in stores. Hope someone maybe tagged it before it was gone


Too good to be true maybe lol

Assuming it was current deal, though I have noticed in the past HD often leaves a lot of out of stock listings up online

 

[MrSurly]

I just looked again and see its out stock online NOW and not available in stores. Hope someone maybe tagged it before it was gone


Too good to be true maybe lol

Assuming it was current deal, though I have noticed in the past HD often leaves a lot of out of stock listings up online

Slickdeals has a LOT of followers.

 

[MrSurly]

Heads up guys, the HD links NOW WORK for the above kit deals. I went to the 99$ kit and scroll down to similar items there are multiple kit deals.
Note that it appears to be the brushed versions but still good prices.
I selected an 18v kit for $313 (599),
Said they’d ship it to me. Paid, now we’ll see if they fill it.


Sent from my iPhone using Tapatalk

 

[MrSurly]

There are over a dozen kits listed. About half have big discounts.


Sent from my iPhone using Tapatalk

 

[Bolster]

Checked back; out of stock.

Others; many out of stock:

https://www.homedepot.com/collectio...y-Promotions/Family-312152257?omsid=310343044

BUT: Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 7-1/4 in. Circular Saw with Free HIGH OUTPUT XC 8.0 Ah Battery $249, that ain't bad...

https://www.homedepot.com/p/Milwauk...C-8-0-Ah-Battery-2732-20-48-11-1880/310729430

 

[48548]

Checked back; out of stock.

Others; many out of stock:

https://www.homedepot.com/collectio...y-Promotions/Family-312152257?omsid=310343044

BUT: Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 7-1/4 in. Circular Saw with Free HIGH OUTPUT XC 8.0 Ah Battery $249, that ain't bad...

https://www.homedepot.com/p/Milwauk...C-8-0-Ah-Battery-2732-20-48-11-1880/310729430

I looked online and found for 279 the 2732 with a 12ah battery charger and bag... I think that is a battery deal

Sent from my SM-N975U using Tapatalk

 

[DFB]

To me the 7 1/4" saw is heavy enough with a standard 9.0ah

Though 12.0 battery might be a good price consider weight. Depending on your needs the oversized battery may not always be an advantage.

Even a 5.0 will run the saw

I was really hoping to score those twin 6ah HO batteries with the free tool (High Torque) back when Blains had that special. I gigured they be just right for my 2731

 

[Speedbird]

https://www.homedepot.com/p/Milwauk...e-6-0-Ah-Battery-2551-22-48-11-2460/310729795

12v Surge
Seems like a good deal with the free 6Ah battery and 2 2Ah battery

 

[2manytools]

https://www.homedepot.com/p/Milwauk...e-6-0-Ah-Battery-2551-22-48-11-2460/310729795

12v Surge
Seems like a good deal with the free 6Ah battery and 2 2Ah battery

It is. Offer still goes til beginning of February in store, that is if you don't want the 6ah. Will be $133 for Surge kit, $66 for battery

To me the 7 1/4" saw is heavy enough with a standard 9.0ah

Though 12.0 battery might be a good price consider weight. Depending on your needs the oversized battery may not always be an advantage.

Even a 5.0 will run the saw

While a 5 will run the saw, it will only be at 5,000 rpm. At that point, I'd rather be using the 2731. I don't cut enough to justify the extra weight.

 

[DFB]

While a 5 will run the saw, it will only be at 5,000 rpm.

That's the first time I have heard anything like that

 

[2manytools]

That's the first time I have heard anything like that

In order for the 2722 super sawzall, 2732 circular saw, chainsaw, and I believe table saw to work at full potential, you need to use a HighOutput battery. This is one of the times the battery & tool talk to each other. The cells in the existing batteries were one of the limiting factor for performance. It's why all those tools are bundled with HO batteries. I would also imagine the new cement saw would perform better with HO batteries.

Milwaukee tool cart is down to $112 at very select locations

 

[DFB]

In order for the 2722 super sawzall, 2732 circular saw, chainsaw, and I believe table saw to work at full potential, you need to use a HighOutput battery. This is one of the times the battery & tool talk to each other. The cells in the existing batteries were one of the limiting factor for performance. It's why all those tools are bundled with HO batteries. I would also imagine the new cement saw would perform better with HO batteries.

Absolutely agree about the max potential using the 12.0. The difference is in cut out under power and of course extended runtime.

The saw is a 5800 RPM saw though I cannot find anything said anywhere else that 5.0ah will only make it run at only 5000rpm.

I just watched a ton of videos on both new saws (rear handle also) The motor on the 2732 is much bigger but so the overall size and weight factor 4lbs heavier I think it was, quite a bit over the original 5000 rpm 2731.

There is seriously quite a difference in performance with the entire setup.

I've buried my 2731 ripping in layered wood till stopped a few times don't take much really

 

[2barevo]

It is. Offer still goes til beginning of February in store, that is if you don't want the 6ah. Will be $133 for Surge kit, $66 for battery

You can return the 6ah battery and essentially get the surge kit for 133?

Sent from my ONEPLUS A6013 using Tapatalk

 

[-->]

I just picked up the m18 fuel impact driver for 99$ with a 2.0 battery bag and charger at HD. I'll post pics tomorrow.

 

[2manytools]

You can return the 6ah battery and essentially get the surge kit for 133?

That is what I posted.

 

[Digital4n6]

You can return the 6ah battery and essentially get the surge kit for 133?

Only if you purchase in-store, as you buy with two item numbers. Online, you buy using a single item number, so the products can't be separated for individual return.

 

[trogo]

Good deal at Walmart (of all places) on the Milwaukee M12 12-Volt Lithium-Ion XC Battery Pack 4.0 Ah and Charger Starter Kit. $56.48

https://www.walmart.com/ip/Milwauke...Pack-4-0-Ah-and-Charger-Starter-Kit/716398680

 

[2manytools]

Good deal at Walmart (of all places) on the Milwaukee M12 12-Volt Lithium-Ion XC Battery Pack 4.0 Ah and Charger Starter Kit. $56.48

https://www.walmart.com/ip/Milwauke...Pack-4-0-Ah-and-Charger-Starter-Kit/716398680

Technically it's a 3rd party seller. Still a decent deal if that's what you need. You can pick up a 6ah for $66 when you buy with Surge kit instore at HD as well. Charger is only worth something to someone who needs it, as I'd rather put $10 more towards the better battery.

 

[javyLSU]

...Milwaukee tool cart is down to $112 at very select locations

Which tool cart?

 

[2manytools]

Which tool cart?

Only one they have, I think

 

[Ign]

Only one they have, I think

Yeah I like those, but pretty sure my store won't have it.

Anyone know what the web status needs to show? Unavailable or "not in your store but we'll ship it there"?

I KNOW clearance stock won't show on the website, that's not the question

 

[javyLSU]

That is amazing... I would buy that for sure if I could find it.

 

[Ign]

Well the cart doesn't show on the PCA at my store. AT ALL

-not under the SKU without dashes
-not under the SKU with dashes
-not under the Milwaukee part # with dashes
-not under the Milwaukee part # without dashes
-not under "Milwaukee" filtered for clearance
-not under "cart" filtered for clearance
-not under the internet SKU (not sure if this ever shows on the PCA in-store)

I handled a few at the front of this store before Christmas but now it's as if they never existed

 

[Wrenchinfool]

Still regular price in ohio

 

[Zestomite]

Still regular price on that cart. Honestly at $448 that’s seems insane. If MSRP was $112 I would still hesitate. What makes this piece of steel worth almost $500??

 

[bigtiger]

Still regular price on that cart. Honestly at $448 that’s seems insane. If MSRP was $112 I would still hesitate. What makes this piece of steel worth almost $500??

yup...much better off those plastic sturdy roll carts, light and rolls easy. Almost all building Maint and shops use those, not heavy over priced Milwaukee.

 

[Firefighter1406]

Marked down to $400 at my store. Still about $200 too much.

 

[tarbellb]

yup...much better off those plastic sturdy roll carts, light and rolls easy. Almost all building Maint and shops use those, not heavy over priced Milwaukee.

Totally, the Rubbermaid (and knock-off) plastic roll carts are down right amazing. No scratching, lightweight, super tuff.

I would but a HF before I touched that Milwaukee.

 

[jimbos1ice]

https://www.internationaltool.com/shop/itc/en/USD/Power-Tools-and-Accessories/Impact-Wrenches/M18[emoji769]-Brushless-1%21slash4-in-Hex-3-Speed-Impact-Driver-Bare-Tool/p/MIP-285120!plus9200966



Not a terribly bad deal, got mine $68 shipped, but to get the free shipping you have to check out but not submit your order, a few hours later I had a free shipping code emailed to me. They must be looking for sales. May not be their best impact but it’s brushless and 3 modes, it will be a back up tool I’ve been meaning to replace and I needed bit set for my different bag. Perfect storm? But try to get the free shipping otherwise with shipping and tax it’s around $80 location pending



Sent from my iPhone using Tapatalk

 

[visiter555]

Still MSRP in Fargo ND and Winnipeg MB

 

[MrSurly]

Two new (I think) deals at OPC.
I don’t follow these prices as close as you guys do. Is this a decent deal on the big grinder, with the free batt?




Sent from my iPhone using Tapatalk

 

[DFB]

So TOOL BARN is having an inventory reduction sale and there are a few Milwaukee items notably worth of a look...


One is the 2712-20 M18 18V Cordless FUEL 1" SDS-Plus Rotary Hammer for $243.95
About $50 less than any legit dealer has it listed for I can see from an online search right now

https://www.toolbarn.com/milwaukee-2712-20.html/

Deep Cut M18 Bandsaw $210.95

https://www.toolbarn.com/milwaukee-2629-22-1.html/

2112-21 USB Rechargeable Rover Pocket Flood Light $46.95

https://www.toolbarn.com/milwaukee-2112-21.html/

M12 solder kit is 133.95

https://www.toolbarn.com/milwaukee-2488-21.html/

Milwaukee 2784-20 M18 FUEL 1/4" Brushless Die Grinder (Bare Tool) is $185.95

https://www.toolbarn.com/milwaukee-2784-20.html/

All these prices beat whatever current price searches I could find today

Here's the entire link of items and brands
https://www.toolbarn.com/shop-by-category/specials/inventory-reduction/?p=1