To avoid these ads, REGISTER NOW!

Mini Split

stlhooked

Active member
Joined
Feb 20, 2006
Messages
28
Location
Collinsville, IL (St. Louis)
I have a 26ft x 28ft x 8ft (725sq ft) garage.
I think I'm going to get an 18,000 mini-split.
What R factor should I use on the wall?
What R factor should I use for the cieling?
Is 220 hard to run out to the garage?
 
To avoid these ads, REGISTER NOW!
OP
S

stlhooked

Active member
Joined
Feb 20, 2006
Messages
28
Location
Collinsville, IL (St. Louis)
stlhooked said:
I have a 26ft x 28ft x 8ft (725sq ft) garage.
I think I'm going to get an 18,000 mini-split.
What R factor should I use on the wall?
What R factor should I use for the cieling?
Is 220 hard to run out to the garage?
Maybe I should go for a smaller one like a 14,000btu 110 and a higher RF insulation. Should I use RF49 on the cieling?
I really like the Sanyo and Mitsubishi models, they sure are expensive though.
 
OP
S

stlhooked

Active member
Joined
Feb 20, 2006
Messages
28
Location
Collinsville, IL (St. Louis)
stlhooked said:
Maybe I should go for a smaller one like a 14,000btu 110 and a higher RF insulation. Should I use RF49 on the cieling?
I really like the Sanyo and Mitsubishi models, they sure are expensive though.
I like the Fujitsu 18rl with a seer factor of 19 for $1900 compared to the Mitsubishi for the same price with a 16 seer value.
http://www.master.ca/en/products/cards/920.html
https://shop.popsriver.com/displayProductDocument.hg?productId=21&categoryId=5
You can see the Mitsubishi one here
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=150072603245&rd=1&rd=1
 
Last edited:
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
Top Bottom