Misc clearance items at sears

[Koy E]

I'm at sears right now and found some stuff on clearance. Of course the YYMV but thought I post some pics for y'all.

 

[bucksnort59]

clerk told me they were gonna start clearancing out their ratchet gear wrench type wrenches

 

[DSM21]

clerk told me they were gonna start clearancing out their ratchet gear wrench type wrenches

They already started to at my local sears, but their prices are still too high

 

[rooney00]

I could use one of those vises. Have to check it out tomorrow.

 

[HMCFab9]

Koy E: can you post a zip code where you found this stuff?
I need an angle vise like that, & i'd probably take the quick release for that price, but they are close to full list price here.

 

[nine4gmc]

I could use a Craftsman angle vise as well, I have both the standard and quick release that I picked up on clearance last year but the angle was still full price then, I'll check local tomorrow.

 

[Koy E]

Sure zip is 94509

Also saw this

 

[zkling]

Looks like a little detour is in order tomorrow evening. Thanks for the heads up Koy E

 

[bucksnort59]

got 2 Jacob's 1/2" drill chuck heads for $6.47 each

 

[kc-steve]

Check around with competitors. EXAMPLE: That 3" general purpose vise is the same price on sale as Grizzly's drill press vise, same thing. I ordered one a couple years ago to fit the same style as my Grizzly DP and full price was about $20.

Steve

 

[ludakris04]

Check around with competitors. EXAMPLE: That 3" general purpose vise is the same price on sale as Grizzly's drill press vise, same thing. I ordered one a couple years ago to fit the same style as my Grizzly DP and full price was about $20.

Steve

Thanks for that input.. I went over to the grizzly site and see that they have very reasonable prices... now I have to figure out what I want....

 

[allinon72]

You got me all excited about the Nupla hammers....I'll go to my Sears tomorrow and see lawn trimmer spools from the 70s in the clearance like I always do. Never anything worthwhile.

 

[drwheels]

one of my sears store has what i call a junk area. it is marked down monthly.Look all over the area.

 

[nine4gmc]

IGNORE the shelf prices, I just picked up the angle vise for $14.97 on clearance and the shelf was normal price on all the vices. I didn't check the price on the others but I'm sure they are clearance as well. Thank you for posting, I would have never known of the sale!!!!

 

[quattroJoe]

As of today, my Sears still has a whole pile of the metric T-handle nutdriver sets @ $9.97, just FYI.

 

[tomahawk_25]

My sears, didn't have the vise but while wondering I did find a few made in the USA swivel head ratcheting stubby wrenches full polish by craftsman sae and metric, the head swivels and there is a lock, 4.97 each, down from 22.99. almost a full set, missing 3 or 4 which were still the normal price for some reason.

 

[nine4gmc]

As of today, my Sears still has a whole pile of the metric T-handle nutdriver sets @ $9.97, just FYI.

My sears, didn't have the vise but while wondering I did find a few made in the USA swivel head ratcheting stubby wrenches full polish by craftsman sae and metric, the head swivels and there is a lock, 4.97 each, down from 22.99. almost a full set, missing 3 or 4 which were still the normal price for some reason.

part numbers?

 

[Twiggss]

I found a few more deals online. Picked up a few larger metric wrenches for under $4 each shipped to store.
21mm combo
24x26mm box end
21x23 open end
..etc

I would guess limited stock

http://www.sears.com/shc/s/tools-awesome-deals/dap-120000000333322

 

[quattroJoe]

part numbers?

This is the T-handle nutdriver set: http://www.sears.com/craftsman-7-pc...p-00934547000P?prdNo=2&blockNo=2&blockType=G2

It was posted here a week or two ago, I was just surprised at the number of them still on the shelf at $9.97 (normal price is $39.99)

 

[turbowoodworker]

As of today, my Sears still has a whole pile of the metric T-handle nutdriver sets @ $9.97, just FYI.

I frequent three different Sears looking for the clearance stuff. One had the metric for 9.97 and the SAE for 39.99. Got the mm, went to the next store two days later and the deal was reversed. So I got each set for 9.97. Pays to look and check back. Got the Torx set T handles several weeks ago 11.99.

 

[turbowoodworker]

BTW, my local Outlet in Greensboro still has RP sets, metric and SAE for 11.99 and USA full polish mm and SAE 7 pc sets, 6 and 12 points marked down to 14 and change. Boxes of them available.
I walk by salivating but my boxes are filled with the CM Industrial from last year. Go get 'em guys.

 

[Brownsfan]

As of today, my Sears still has a whole pile of the metric T-handle nutdriver sets @ $9.97, just FYI.

Exact opposite here. Wonder if they were just sitting heavy on certain sets in certain places? Why not just close out both

 

[Kyle.B]

I have yet to find a good deal in store at my Sears. Everything on the shelves is always full price or on Sale for about $2 less than the normal price. The clearance section is usually full of bits and pieces that look like they fell of the truck and you get a whopping 5-10% off... Yet I still always check whenever I go to pick up an online order.

 

[carder69]

Picked up a few open stock polished lock flex wrenches - also had tw0 Vaughn 20 oz framing hammers on clearance 50% off. Not much else in Indy Castelton Sears

15MM,RATCHETING WRNCH 1 6.97 T 942495 CLRX
17MM LOK,FLEX WRENCH 1 6.97 942482 CLRX
WRENCH 7/16,STUBBY LOCKIN 1 5.97 T 942486 CLRX
WRENCH 18MM,STUBBY LOCKIN 1 5.97 T 942497 CLRX
WRENCH 8MM,STUBBY LOCKING 1 4.97 T 942491 CLRX

 

[Richard Cranium]

Are these in stores that are closing? My local sears don't have the vices on sale at all? Richie

 

[pacecar]

gah no deals really

I cruised by today and on sunday

I did take advantage of a mis-marked sale item

got this set for 20 bux

http://www.sears.com/craftsman-6-pc...0934575000P?prdNo=26&blockNo=26&blockType=G26

was suppose to be this set

http://www.sears.com/craftsman-5-pc...0934574000P?prdNo=18&blockNo=18&blockType=G18

 

[WrenchFL]

Got this the other day!

 

[cagullett1]

Got this the other day!

********... best deal I've seen in a long time at Sears.

 

[usmc_noma]

That's a score on that set.

 

[mojo3120]

BTW, my local Outlet in Greensboro still has RP sets, metric and SAE for 11.99 and USA full polish mm and SAE 7 pc sets, 6 and 12 points marked down to 14 and change. Boxes of them available.
I walk by salivating but my boxes are filled with the CM Industrial from last year. Go get 'em guys.

Just a bunch of junk in the Charlotte outlet. I've got a box full of Industrial and professionals from last year as well though.

 

[metaldad]

well, now i gotta stop in at the various stores around here.
i'm taking bets......... that i'll find nothing on sale.
last tool clear out, i found out that the sales kids were buying everything and putting up on ebay

 

[PRND3L]

I found a few more deals online. Picked up a few larger metric wrenches for under $4 each shipped to store.
21mm combo
24x26mm box end
21x23 open end
..etc

I would guess limited stock

http://www.sears.com/shc/s/tools-awesome-deals/dap-120000000333322

Thanks for that link! Got 7 large metrics, w00t!

 

[DSM21]

Got this the other day!

Damn really hating on you right now

 

[Cyclones6]

Clearance section at my local Sears is awful. Usually loose power tools and socket sets missing pieces. Only about 10-20% off too

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[DieselDent]

$37.07 after tax, the one in california md had a bunch of stuff on clearance
View media item 37615View media item 37620

 

[Cyclones6]

$37.07 after tax, the one in california md had a bunch of stuff on clearance
View media item 37615View media item 37620

Damn I've been looking at getting one of those. More than half off. You lucked out for sure!

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[tomahawk_25]

here are the part number for some of the stubby wrenches I purchased

5/8 LOK,FLEX WRENCH INCH 4.97T
0942475

WRENCH 3/4",STUBBY LOCKIN 4.97T
942490

WRENCH 5/8",STUBBY LOCKIN 4.97T
942489

WRENCH 5/16,STUBBY LOCKIN 4.97T
942484

WRENCH 7/16,STUBBY LOCKIN 5.97T
942486

 

[rooney00]

Picked up the quick release for $14.97. Couldn't find it in the store. Not even a hole where it belonged. But the computer showed 3 on hand and a guy found them in the back room.

 

[Twiggss]

I found a few more deals online. Picked up a few larger metric wrenches for under $4 each shipped to store.
21mm combo
24x26mm box end
21x23 open end
..etc

I would guess limited stock

http://www.sears.com/shc/s/tools-awesome-deals/dap-120000000333322

So I picked up my order today and everything wound up being the Industrial made in the USA stuff.

Might have to make another order.

 

[byoungblood]

I have yet to find a good deal in store at my Sears. Everything on the shelves is always full price or on Sale for about $2 less than the normal price. The clearance section is usually full of bits and pieces that look like they fell of the truck and you get a whopping 5-10% off... Yet I still always check whenever I go to pick up an online order.

Sometimes you just have to grab something and take it to the price checker or have an employee check the price. Store I got the Nupla dead blow from only had it marked down $5 on the shelf, yet it rang up another $15 less. T handle nut drivers were still on the shelf full price, but as others have reported, rang up at $9.97.

So if you see a clearance item on here you're interested in, it pays to check the price if isn't marked on the shelf. Some stores just don't do a good job of putting the tags on stuff.