More free tools from the warehouse remodel

[383 240z]

I was clearing out some more of the warehouse area that they are re-doing. These are the machinist tools I found. These are SOME of the stuff I got with the Darex sharpener. You will see what looks like bad surface finish on a LOT of them if you enlarge the photo. It's frost. They were in my truck in -13 temps right before I took the pics.

These are all marked Starett Anthol Mass.

A smaller set of V blocks along with a test bar for a lathe

Here are a few odds and ends. The Starett DI has a broken lens, but the indicator works. Not sure about the Mitutoyo, I have not tried a new battery yet

Here are 2 sets of 1-2-3 blocks. Some of the holes are threaded. Not sure how you use those.

This is a single v-block kinda odd shaped

Large set of v-blocks

Few different mag bases. Never saw the style on the right hand side before

Not really a machinist tool, but who doesn't like a free set of Wiss snips?

I still have a few more boxes to dig thru, Keith

 

[drivesitfar]

That level looks very cool and i'd use it everyday outside when it's not raining here. i'm not handy enough to use or know what all the other cool tools are, but i'm sure they are great too.

Nice Save

 

[rsanter]

All of that looks like junk to me.....
On the other hand I am a junk collector so you could always send it to me

Bob

 

[iajonesy]

Is any of it going to be sold? Might be interested in a few items.

Mike

 

[2oolhound]

WOW! You ****!

 

[Aquaticbob]

That level looks pretty cool, interesting to see it have some sort of design in it. Levels these days seem so boring!

 

[Farmall450]

Nicely done!

Free is always the best price

 

[383 240z]

PM or post up what your interested in. A few of them will be duplicates to what I have. I'm always willing to trade for stuff I don't have. Keith

Is any of it going to be sold? Might be interested in a few items.

Mike

 

[ZRX61]

If you wipe down the handles on those Wiss snips with lacquer thinner they will look like new. May take off the Wiss logo though. That's my method with Crescent wrenches that are black with ****. Then a quick spray & polish with lemon Pledge

 

[MikeF2316]

I was clearing out some more of the warehouse area that they are re-doing. These are the machinist tools I found. These are SOME of the stuff I got with the Darex sharpener. You will see what looks like bad surface finish on a LOT of them if you enlarge the photo. It's frost. They were in my truck in -13 temps right before I took the pics.


Few different mag bases. Never saw the style on the right hand side before

I still have a few more boxes to dig thru, Keith

I like the mag base you're charging up with the USB cable.

 

[383 240z]

These are all in just picked condition, I had about 30 mins to get everything loaded and gone. I don't even know what all is in there. Keith

 

[383 240z]

I like the mag base you're charging up with the USB cable.

It does kinda look like that doesn't it?? Silly reflections. Keith

 

[PLOWJEEP]

Good find, congradulations.

 

[jeffmoss26]

Very cool! I love the old stuff.
Did I miss the post about getting a Darex?

 

[383 240z]

Yep with ALL the arbors and the web splitting feature.

http://www.garagejournal.com/forum/showthread.php?t=229875&highlight=darex

Keith

 

[383 240z]

By request. Here are more pics of the Starrett level It measure 12 1/2" long 3/4" wide and 1 3/4" high. 3 bubbles, black in color. Anyway here are a few pics.

 

[WWIIjeep]

The Starrett level is a No. 132 bench level. They made that style for a very long time. The design goes back to the 19th century, but they were still making it in the same style as late as the 1970s, if not longer.

The Starrett dial indicator is probably worth fixing. Send it to Starrett or to Long Island Indicator Service and they'll put a new lens in the bezel.

Nice finds.

 

[ilovevocs]

Nice Haul

 

[Packard V8]

You're pretty lucky. The last warehouse cleanup I did involved shoveling bat ****.

jack vines

 

[bonneyman]

That level is a beaut for sure!

Use Quick & Brite on the Wiss snip handles. Will remove the grease without hurting the imprinted logo.

http://www.quicknbrite.com/store/