Since someone DM'd me and asked for a in-depth detailed list. Here it is!
Ok the Red tooltote.
Bottom right side is my SAE deeps from MAC tools the metal socket holder held on by magnets. Next to it is my 3/8dr MAC round flex head, Old snapon fixed head hard handle I custom added on. Then is the 1/2dr MAC round flex head I love these FACOM made ratchets super strong!! Then is my 1/2dr Pittsburgh Pro SAE and Metric shallow impacts with a ICON impact universal joint and on the joint is a old Proto 1" extension that is like a spinner thing. Then in the red magnetic time saver from bottom to top the tools are as followed.
1 chrome 3" extension, my Expert 3/8 impact universal joint with a 22mm socket on it, my ICON 3/8 universal joint, 2 1" 1/2dr extensions connected, my step up and down adaptors.
Then a 6" MAC 1/2 extension, A 3" proto locking 3/8 impact extension with a 21mm socket on it. My Proto pear head I made into a stubby. Then finally my wd40 pen.
Above the red magnetic holder are my 6" extensions and my MAC (spinnerhandle) handled extension that is a great tool! I also have 2 8" extensions a Proto and Snappy. That about rounds out my tooltote.
Stanley socket case now.
It started out as a Stanley Black chrome 12pt set that only lasted a few months I hated the sockets loved the case.
I replaced the 1/4dr shallows, 3/8dr shallows and the few 1/2dr all with Husky sockets as I found the 200 piece socket only set from Husky for $40 a few years back. The 1/4dr still are the Husky sockets. The 3/8dr are my MAC USA and the 1/2dr never got used in here so they stayed the Husky as well. The ratchets got replaced pretty quick as I broke them all besides the 1/2 pretty much right away they seized up.
The 1/2dr now is a Stanley 110tooth got it as a gift and like it pretty well it's a good back up. The 3/8dr is a NAPA Carlyle 72 tooth I love this thing I have a 2nd as at home.
The 1/4dr is where I have the most options in this little kit. The one you can see clearly is a MAC 30tooth not a bad little guy. In the clear storage space I have a NAPA Carlyle short comfort grip, A ICON long fixed head and a ICON Roto head and love that ratchet. In the storage space I also hold the 3 SAE shallows that didn't have a space as well as a 1/4 spinner handle and a 15/16 sparkplug socket and a pocket flathead.
Enjoy!
Ok the Red tooltote.
Bottom right side is my SAE deeps from MAC tools the metal socket holder held on by magnets. Next to it is my 3/8dr MAC round flex head, Old snapon fixed head hard handle I custom added on. Then is the 1/2dr MAC round flex head I love these FACOM made ratchets super strong!! Then is my 1/2dr Pittsburgh Pro SAE and Metric shallow impacts with a ICON impact universal joint and on the joint is a old Proto 1" extension that is like a spinner thing. Then in the red magnetic time saver from bottom to top the tools are as followed.
1 chrome 3" extension, my Expert 3/8 impact universal joint with a 22mm socket on it, my ICON 3/8 universal joint, 2 1" 1/2dr extensions connected, my step up and down adaptors.
Then a 6" MAC 1/2 extension, A 3" proto locking 3/8 impact extension with a 21mm socket on it. My Proto pear head I made into a stubby. Then finally my wd40 pen.
Above the red magnetic holder are my 6" extensions and my MAC (spinnerhandle) handled extension that is a great tool! I also have 2 8" extensions a Proto and Snappy. That about rounds out my tooltote.
Stanley socket case now.
It started out as a Stanley Black chrome 12pt set that only lasted a few months I hated the sockets loved the case.
I replaced the 1/4dr shallows, 3/8dr shallows and the few 1/2dr all with Husky sockets as I found the 200 piece socket only set from Husky for $40 a few years back. The 1/4dr still are the Husky sockets. The 3/8dr are my MAC USA and the 1/2dr never got used in here so they stayed the Husky as well. The ratchets got replaced pretty quick as I broke them all besides the 1/2 pretty much right away they seized up.
The 1/2dr now is a Stanley 110tooth got it as a gift and like it pretty well it's a good back up. The 3/8dr is a NAPA Carlyle 72 tooth I love this thing I have a 2nd as at home.
The 1/4dr is where I have the most options in this little kit. The one you can see clearly is a MAC 30tooth not a bad little guy. In the clear storage space I have a NAPA Carlyle short comfort grip, A ICON long fixed head and a ICON Roto head and love that ratchet. In the storage space I also hold the 3 SAE shallows that didn't have a space as well as a 1/4 spinner handle and a 15/16 sparkplug socket and a pocket flathead.
Enjoy!
Attachments
Last edited: