To avoid these ads, REGISTER NOW!

My 14x16....

alkemyst

Well-known member
Joined
Feb 10, 2008
Messages
279
Still coming along, Ridgid TS3660 in on the south wall waiting to be put together, the paint in the SouthEast corner will go to the attic, and the center table will be replaced. I want to do VCT on the floor.

Before Shots:
GarageWest.JPG


GarageNorth.JPG


GarageEast.JPG


GarageSouth.JPG


GarageLighting.JPG



Latest:
GarageWestNew2.JPG


GarageNWNew2.JPG


GarageNorthNew2.JPG


GarageNENew2.JPG


GarageEastNew2.JPG


GarageSENew2.JPG


GarageSouthNew2.JPG


GarageSWNew2.JPG


GarageWestLowNew2.JPG


GarageNorthLowNew2.JPG
 
To avoid these ads, REGISTER NOW!
OP
A

alkemyst

Well-known member
Joined
Feb 10, 2008
Messages
279
Nice work. How are those C3 batteries held on the wall? I've got a decent of C3 tools and I really them.

I just put some wood screws through the holes in the chargers. Same with the black and decker setup (do not torque them down all the way on the 3 battery charger...it flexes too much and you won't be able to plug the batteries in).

I had two craftsman chargers until one died recently...I think I got it when the 19.2V setup first came out. My plan is to rotate out to lithium as it's compatible, charges faster and lasts longer.
 

Old61

Well-known member
Joined
Nov 12, 2008
Messages
157
It looks like you may have the only real garage on this board!
 
To avoid these ads, REGISTER NOW!
OP
A

alkemyst

Well-known member
Joined
Feb 10, 2008
Messages
279
previous owner installed it, but it's just a cubicle overhead with a built in flourescent light.
 
OP
A

alkemyst

Well-known member
Joined
Feb 10, 2008
Messages
279
Some updates:

GarageNELow3.jpg


GarageWestLow3.jpg


Outlets.jpg


I painted the crossboards above white and also painted the underside of all the workbenches nice and white today....it throws noticably more light.
 
Last edited:

rickairmedic

Well-known member
Joined
May 31, 2005
Messages
4,165
Location
louisville ,Ky
I gotta give it to you I think you have managed to squeeze as much stuff in there as I have in my 21X25 and I am stil trying to figure out where to stuff stuff :D.

Rick
 
To avoid these ads, REGISTER NOW!
Top Bottom