To avoid these ads, REGISTER NOW!

My 2 car garage reclaim project

2001ZR2

Well-known member
Joined
Jan 4, 2018
Messages
420
Location
Kansas City
This is my 50th post so based on encouragement from SWMBO I will start thread on how now that my kids are older I am reclaiming my garage.

Let's start with the mandatory before picture with much shame.
20191123_134238 - Copy.jpg

This is what I am starting with and I have following criteria.

Little if any Tetris as how is got this bad was too much stuff in too small of an area. I have gotten stacked to where I could have 2 cars in there but to find anything required moving other things.

Need to be able to park my 1967 Camaro inside and only move it out when I drive or if I need the space to work another.

Organize my chaos so I can find tools and complete projects faster.

The first step is to upsize my tool storage from a Craftsman 26" stack.

For that I looked at many options and in true GJ fashion screwed up. I was comparing a 41" lower with a side cabinet against a 56" lower. Both would fit easily.

So I bought a 56" MasterCraft 24" lower with a matching side cabinet.

20191122_141154 - Copy.jpg
20191122_142146 - Copy.jpg
 
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
OP
2

2001ZR2

Well-known member
Joined
Jan 4, 2018
Messages
420
Location
Kansas City
I made progress and took pictures. I should admit this was after 3 days of working on things in garage.

From November:

I decided to use a piece of 3/4" birch plywood for a topper for the lower and side cabinet.


20191123_200025 - Copy.jpg

Then switching the placement of the metal shelves and the free workbench I got to this point.
20191124_162939 - Copy.jpg
20191124_162950 - Copy.jpg
 

Attachments

  • 20191123_195959 - Copy.jpg
    20191123_195959 - Copy.jpg
    84.2 KB · Views: 18
OP
2

2001ZR2

Well-known member
Joined
Jan 4, 2018
Messages
420
Location
Kansas City
I then figured out that I had some slope to the floor.

20191126_082918 - Copy.jpg
20191126_091217 - Copy.jpg

I used what I had and put washers under the 6 wheels to level out the tool box.

20191126_091232 - Copy.jpg

I took down the peg board as installed my a previous owner and relocated it over the work bench.

Now the baseline and to start organizing this area so it works for me.

That's enough for tonight but I have made a little progress since then and will get up photos soon enough.

20191126_161052 - Copy.jpg
 
To avoid these ads, REGISTER NOW!
Top Bottom