To avoid these ads, REGISTER NOW!

My 2+ Car Makeover

Badgerhawk

Member
Joined
Apr 21, 2009
Messages
5
Since this site has also inspired me I thought I would supply my progress in return. Note: Full completion make take a while as we have a little one on the way and other things take precedence. This is also going to be done on a tight budget.

We just moved in last summmer and have been preoccupied with other things. The POs had the garage sprayed a nasty peachy khaki including ceiling, side door, panels etc.

Before:
img_3679-vi.jpg


Stage 1: Nail pulling and hole filling
pano_east_wall-vi.jpg

pano_north_wall-vi.jpg

pano_south_wall-vi.jpg
 
Last edited:
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!
OP
B

Badgerhawk

Member
Joined
Apr 21, 2009
Messages
5
I managed to get the primer up last weekend.

I do plan on going with white over gray with a blue stripe. It is appropriate for the VW, Mazda, and the Ford. I saw someone else on here had the same idea. The issue now is to find the height for the border that will look right on all of the walls.

I was thinking that a 360 laser Level would be the best way to visualize and lay out the border. For those of you that used one what one did you get?

pano_primed1-vi.jpg


pano_primed2-vi.jpg
 
To avoid these ads, REGISTER NOW!
Top Bottom