To avoid these ads, REGISTER NOW!

My garage floor tile (long term update)

thejunkmanadv

Well-known member
Joined
Aug 14, 2013
Messages
1,682
If you want to see the first video with information and pictures about why I chose this floor and my opinions when I installed my True Lock Diamond flooring tile visit this page. Long term video is on this page too.

My Garage tour and flooring page

Here is the direct link to the video, but you will want to see my page with the other videos and information.

 
To avoid these ads, REGISTER NOW!

Qball

Member
Joined
May 21, 2006
Messages
5
How well does this stuff hold up to moderate automotive use such as using a floor jack and supporting a car on jack stands? Would one need to use a steel plate to spread out the load?
 
To avoid these ads, REGISTER NOW!
OP
T

thejunkmanadv

Well-known member
Joined
Aug 14, 2013
Messages
1,682
How well does this stuff hold up to moderate automotive use such as using a floor jack and supporting a car on jack stands? Would one need to use a steel plate to spread out the load?

I think this has probably been addressed with other flooring of this type, Race Deck ect..., and this is no different.

I use a floor jack all the time on it, no problems, jack stands need something under then otherwise they will slightly dimple the floor if they are the kind that are basically like a piece of angle iron on the end. Basically anything with a very small, under 2in X 2in , point load will possibly make a mark.
 
To avoid these ads, REGISTER NOW!
Top Bottom