hello all, went to a g-sale and picked up a box of 1/4" dr sockets/misc. along with a bunch of old sk, idestro there was a snap on 9/32. 3 sockets, 2 no marks, 1 plomb. also, the reason i'm making the post is this breaker bar. seems well built (heavy), 5.25" no maker mark. any suggestions?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
mystery breaker bar
- Thread starter Cf mtn
- Start date
Rileysan
Well-known member
hello all, went to a g-sale and picked up a box of 1/4" dr sockets/misc. along with a bunch of old sk, idestro there was a snap on 9/32. 3 sockets, 2 no marks, 1 plomb. also, the reason i'm making the post is this breaker bar. seems well built (heavy), 5.25" no maker mark. any suggestions?
I believe it's an SK. If I recall correctly, the breaker bar in my 1/4 drive SK kit has no markings either.
Brian
I believe it's an SK. If I recall correctly, the breaker bar in my 1/4 drive SK kit has no markings either.
Brian
thanks rileysan, that seem's right, i haven't went through them but there are what could be a set of older sk pcs. thanks, again
Provincial
Well-known member
I checked out my SK 1/4" breaker bar today, and it looks just like this one, and has no markings.
Richard Cranium
Well-known member
Yes, older s&k breaker bar
four.cycle
Well-known member
compare to 40953 S-K:
http://www.ebay.com/itm/Vintage-S-K...:g:SCwAAOSwdzVXitQp&item=381704452451&vxp=mtr
(currently the 40953 is the part number for their 1/4" drive spinner, formerly model 40954. apparently the old 40953 flex-handle (aka breaker) was discontinued?)
http://www.ebay.com/itm/Vintage-S-K...:g:SCwAAOSwdzVXitQp&item=381704452451&vxp=mtr
(currently the 40953 is the part number for their 1/4" drive spinner, formerly model 40954. apparently the old 40953 flex-handle (aka breaker) was discontinued?)
four.cycle
Well-known member
^ most of those little "T-bars" are missing from those 1/4" drive sets - at least that's been my observation looking through Ebay ads over the last 10 months.
few of them are marked with maker's name, so it just looks like a piece of steel bar stock. New Britain marked theirs. S-K, Indestro, Duro-Chrome, Stevens-Walden, Craftsman: no markings on the "t-bar".
so: they get lost. they get tossed.
best way to find one (if you want to get one) is poke through S-K 1/4 socket sets on Ebay and find something with the "t-bar". there are lots of partial (and complete) sets listed on there.
looks like S-K knurled one end of the piece:
(older knurled band)
http://www.ebay.com/itm/Vintage-S-K...:g:~gwAAOSwgZ1XqT-z&item=331948316110&vxp=mtr
(no ratchet)
http://www.ebay.com/itm/Vintage-S-K...578469?hash=item33bd8eb565:g:LmcAAOSwHoFXtjIQ
few of them are marked with maker's name, so it just looks like a piece of steel bar stock. New Britain marked theirs. S-K, Indestro, Duro-Chrome, Stevens-Walden, Craftsman: no markings on the "t-bar".
so: they get lost. they get tossed.
best way to find one (if you want to get one) is poke through S-K 1/4 socket sets on Ebay and find something with the "t-bar". there are lots of partial (and complete) sets listed on there.
looks like S-K knurled one end of the piece:
(older knurled band)
http://www.ebay.com/itm/Vintage-S-K...:g:~gwAAOSwgZ1XqT-z&item=331948316110&vxp=mtr
(no ratchet)
http://www.ebay.com/itm/Vintage-S-K...578469?hash=item33bd8eb565:g:LmcAAOSwHoFXtjIQ