Name that auto tool thread

[WILD-BILL]

Pilot bushing puller

Nope, someone nailed it earlier. It's a hyduralic lifter extracor

Here's one to start:

Oil pump drive priming tool. Looks like for a Mopar engine.

 

[ihateminimumwage]

Oil pump drive priming tool. Looks like for a Mopar engine.

Got it. Bought it for my Ford, but might work on at Mopar.

Here's another.

 

[mopwered]

For ford axle nuts on 4wd trucks i have one .

 

[ihateminimumwage]

For ford axle nuts on 4wd trucks i have one .

BAM! Got it.

Here's an old one I have that still works great.

 

[mopwered]

It looks like a drum mic.

 

[theknurl]

valve adj tool maybe for a Benz

Yes.....

 

[theknurl]

I needed a pair of these the other day...

Clic-R hose clamp pliers

 

[ihateminimumwage]

It looks like a drum mic.

Try again.

 

[rednotch]

oil pump priming tool, OEM brand?

 

[chicane]

How about this one, any takers?

O2 sensor wrench.

 

[uniballer]

BAM! Got it.

Here's an old one I have that still works great.

cylinder bore gauge, I have one in a wooden box

 

[ihateminimumwage]

cylinder bore gauge, I have one in a wooden box

Correct. Old Ames Cylinder Bore Gauge.

 

[sean Buick 76]

Keep adding tool pics guys!

 

[WILD-BILL]

Did I finally stump you guys?

 

[Ruger_556]

Did I finally stump you guys?

It almost looks like a drill jig but I know that isn't right... Yeah, we're stumped

 

[WILD-BILL]

Ok, Here ya go......

It's a clearencing tool for Jr Dragster motors. It is used inplace of the side cover and holds the cam and crank in the proper loaction so you can spin the parts over so you can clearence them for the larger stroke.

I can't find a pic with the tool in place but did find one a motor with the side cover off.

The small holes on the out side fit over the dowels, The large hole on the left holds the crank in position, the smaller hole holds the cam.

This one does 2 differnet motors, The smaller Raptor on one side and the larger Blockzilla on the other. I have another slightly larger for the even bigger ZR motors.

 

[ttpete]

Heck, if we're going to do that stuff, I could stump everyone with the contents of my Kennedy box full of British motorcycle special tools.

 

[WILD-BILL]

Fair enough

 

[Badattitude]

Here's an old snapon ratchet of mine and it was purchased for a specific use

anyone remember what it is used for?

 

[retDAC]

Here's an old snapon ratchet of mine and it was purchased for a specific use

anyone remember what it is used for?

Front end alignment?

 

[Badattitude]

You nailed it!!

 

[metalhead212121]

Can I play??? I only used this tool a handful of times. Bought it for a customer I loathed and despised. Long story short he crashed the car after I used it on his car a couple times. I wanted to take the tool ram it down his throat and tell him you owe me $30(?) for a tool I'll never use again due to most of these cars being the junkyard now.

 

[KDonkey]

That's for a broken oil filter cap. What car did you need it for?

 

[metalhead212121]

That's for a broken oil filter cap. What car did you need it for?

THAT WAS FAST!

Some sort of Pontiac 4 cylinder. Grand Am maybe?

 

[GTA Matt]

Iron duke

 

[threewood]

 

[Wine-o1]

Can I play even if I don't know what these are? I am hoping somebody knows what they are. I found them in the cabinet of a Kwik-way valve grinder and assume they have something to do with it.