NAPA Bottle Jack ID

[NFH2740]

3 ton Japanese NAPA from the early 90s, perhaps late 80s. First two digits of model are 94, last digit is 6. I would like to source a seal kit for it.

 

[txvwnut]

From the looks of it, it doesn't look rebuildable as it appears to be welded at every section you's need to remove to rebuild.

 

[Hiball]

I suspect it’s from the Norco/Kyb family, they where known for welding both ends of the reservoir and access is gained via a Internal snap ring allowing access to service the Main ram piston seal.

 

[NFH2740]

I suspect it’s from the Norco/Kyb family

This is the information I needed to make progress-- it does indeed look identical to Norco models. Thank you.