Need a slide hammer style dowel pin remover

[jlipsky14]

Looking for a dowel pin puller. I would like the slide hammer type.
I don't use it that often so I don't need the most expensive set out there but would like a fairly complete set that is on the cheaper side. Don't want to pay for a name just want a good quality tool.

I was looking at this style as well but would prefer a slide hammer.
http://www.amazon.com/dp/B006LUELJO/?tag=atomicindus08-20

Any other suggestions?

 

[kunkernator]

This is the set I have.
http://www.oreillyauto.com/site/c/detail/PIO0/T635/N0716.oap?ck=Search_N0716_-1_-1&pt=N0716&ppt=C0374

Didnt get it from Oreilly's, and it is expensive, but it serves me well on a daily basis.

To be honest, all the ones I have found are very expensive, I dont know why, but there also arent a lot out there. The extra collets are expensive as well.

 

[928'er]

If the dowel is something you can grab a hold of, you might consider making your own slide hammer by modifying a pair of vicegrips. Lots have done it, here's a link to a video on one guys take on it:

 

[kunkernator]

If the dowel is something you can grab a hold of, you might consider making your own slide hammer by modifying a pair of vicegrips. Lots have done it, here's a link to a video on one guys take on it:

OTC makes a set of those adapters, I have them and they are excellent. I believe you can buy them separate too.

http://www.amazon.com/gp/product/B007QV9ZCK/?tag=atomicindus08-20

 

[jlipsky14]

I looked at the vise grip ones but the vise grip cant grip it nearly tight enough as the pins are such a hardened steel.

The one from Oreilly's is what I am looking for just seeing if there is a cheaper alternative out there.

 

[Wamsutta]

Have you looked at Silver Seal kit?

http://www.silver-seal.com/category/shop.3_short_block_rebuilding.dowel_pullers/