Need a tool

[kunkernator]

I have a common issue. I have to R&R these 2'' NPT plugs on a daily basis, they have a 7/8'' internal square drive on it, similar to the image below. Most of the time I can get away with using a 3/4'' ratchet, but I would like to have the proper tool to remove them... Anyone?

 

[txvwnut]

Pipe plug socket is what you need.

 

[Bobcat753]

So you need a Male pipe plug socket? I looked around but I didn't see a 7/8" in my quick search.

 

[Jbullfrog]

http://www.sears.com/search=cleanout plug wrench

Search plumbing cleanout tool, here are a few options.

 

[jakemac]

You could always get a 3/4-1" drive adapter and grind the 1" male side down to 7/8".

 

[gdocktor3]

Weld a small piece of 7/8" stock into a T or L and use like Allen wrench.

 

[Derek420]

You could always get a 3/4-1" drive adapter and grind the 1" male side down to 7/8".

^^^^^^^^^Ditto.......Or find a plug socket.

 

[bczygan]

Get a couple of these: