Need Help Finding OEM Wire Connector

[RbrtAWhyt]

I need some help finding this OEM 3-cavity wire connector:

[URL=http://s139.photobucket.com/user/rbrtawhyt/media/garage/connector.jpg.html] [/URL]

It's a Ford connector and it's the opposit end of this one:



Anyone have a good source for Ford OEM connectors? Thanks!

 

[ken w.]

NAPA has some popular wire harness ends. They had the three harness ends for my 97 Ford Ranger.

 

[Schurkey]

http://acdelcotechconnect.com/parts-catalog/wiring-sockets-pigtails-catalog/

 

[BillK]

Have you tried the Ford dealer ? That would be my first choice.

 

[jimgood]

If both ends of the connector are pig-tailed, replace them with something that's easier to find.

But here's a reference that might help: http://www.fordservicecontent.com/pubs/content/connectors/images/connectorcatalog.pdf

Looks like WPT-1001 (Tin) 3U2Z-14S411-NUB in the above pdf.

If you search on that part number it comes up as a fuel inertia switch connector (or Fuel Shutoff Solenoid Connector)

 

[readhead]

Junk yard?

 

[66HertzClone]

Looks like the connector for the fuel pump inertia switch. I bought the one I needed from Summit Racing, is this it?

Here is another source of more parts, http://www.repairconnector.com/"]Repair Connectors[/URL].

 

[CJ7VFR]

If both ends of the connector are pig-tailed, replace them with something that's easier to find....

I say go this route also.

Since you already have access to the one end, you can easily replace both ends with a simple three wire connector set that you can find almost anywhere.

Also, there is a very good chance that an aftermarket three wire connector set will cost a LOT less than the one from Ford. If you have your heart set on an OEM connection, then you will probably have to buy both sides of the connector set, as most of these come as a complete set.

Jim

 

[zkdiesel]

The motorcraft service pigtail chart will have that in it with a part number

 

[rustrunner]

look up " Auveco Products". they have a ton of stuff. they are available through Fastenal

 

[Duster346]

The motorcraft service pigtail chart will have that in it with a part number

I have the chart at work. I can look when I get there tonight if the OP hasn't found it by then.

Ford and GM are fairly good as far as offering repair pigtails connectors. Chrysler, however is not--at least they werent 10 years ago when I worked for them.

 

[tfinniii]

Try http://www.wiringdepot.com/store/c/0-Root.aspx

 

[LS6 Tommy]

I've had good luck with this site:

https://www.carid.com/electrical-parts.html?gclid=CNPT2-aRs88CFcQfhgod6H0C3Q

Tommy

 

[wolfhawk73]

http://www.rockauto.com/en/moreinfo.php?pk=2603376&cc=1441671&jsn=522

I randomly went to rockauto.com, picked Ford, 2008, Explorer, and fuel cutoff solenoid (under electrical connectors), and it looks an awful lot like what you posted.

 

[Duster346]

It's one of these two connectors. Honestly don't see a difference between the two. This will at least give you the ford part numbers. The part number is the number on the bottom, starting with 3U.

 

[jimindm]

If it is a high failure rate part, many of those a after market products available at any parts store.

Last I knew ford only sold the wire inserts, and then the shell of the connector. Maybe it is different now.

Maybe f you could post what it connects to, it would help.

 

[Fishn1]

A very good place to get any kind of automotive plug or wire harness is Aerodyne inc.
They can make any plug you need. Aerodyneinc.net

 

[Duster346]

My bad, neglected to read where you said you needed the end it plugs into. Try this:
Ford part number 3U2Z-14S411-GGA

Hope this helps.

 

[zkdiesel]

My bad, neglected to read where you said you needed the end it plugs into. Try this:
Ford part number 3U2Z-14S411-GGA

Hope this helps.

This on the left is the one side

Or wpt446 or wpt459 is the side you pictured up top
Of the two part numbers I listed I can't see a physical difference