Need help identifying

[Moparman2016]

Hello,
I just picked up a new to me older compressor. It came from a coworkers dads house and was in a corner of the garauge with no tags and a broken crank. I am trying to figure out what pump it is. The most I can figure is its a Campbell Hausfeld off a Speedaire had a silver flywheel and the compressor body is green.
Every number or spec I have found on it.
Unit has a 3"bore 2" stroke
crankshaft has a vt-6
front bearing plate vt-0125
Case 0950 2
has a 28.3CID
10.5" height
9" body length body only
4" Cylinder jug height

As close as I have found is a Campbell Hausfeld VT235000 but am unsure. As near as I can tell that pump has a 2.75 bore, and updates to a VT47000 series
Any help would be appreciated.

 

[stanleyrleonard]

Maybe go here for photo; and, click on "visit page" [3rd photo, upper row] for a parts manual:

https://www.google.com/search?q=spe...ner9EM:;Fdpt5-xIH2eKEM:&imgrc=PiLynq1Hner9EM:


Hope this is the one--Stan

 

[stanleyrleonard]

Explosion:

http://www.mastertoolrepair.com/air-compressor-pump-parts-2z499a-2z499b-2z630b-p-39994.html

Stan

 

[Moparman2016]

I think you are correct. I just noticed there where 2 different sizes 1 of them is a 2.75 piston and there is also a 3'' piston version. I did not notice that at first. Thank you for the help. It is greatly appreciated.

 

[Moparman2016]

Thought I would post back. I found the model it is a 2Z630B. There are 2 models that are identical in size and stroke but the 2Z499 has a 2.75 bore and the 2Z630 has a 3" bore.

 

[BlueBomber]

Explosion:

http://www.mastertoolrepair.com/air-compressor-pump-parts-2z499a-2z499b-2z630b-p-39994.html

Stan

I clicked that link expecting to see something completely different...lol

 

[Provincial]

I have a Craftsman compressor with that pump. We bought it around 1973. It has a serpentine-type belt with many small grooves and a 3hp/3400 RPM motor. I had to rebuild the pump around 2005 due to high oil consumption, and it was hard to find some of the parts then.

I upgraded the air filter to eliminate the pads and use a paper air filter like your photos show.

 

[stanleyrleonard]

Thought I would post back. I found the model it is a 2Z630B. There are 2 models that are identical in size and stroke but the 2Z499 has a 2.75 bore and the 2Z630 has a 3" bore.

Maybe some more help: http://www.industrialmanuals.com/ma...n 2Z498, 2Z499 and 2Z630, Compressor Head.pdf

Stan

 

[stanleyrleonard]

I clicked that link expecting to see something completely different...lol

Looking at your moniker,then your comment, thought I would provide this:https://www.tumblr.com/search/atom bomb explosion

lol--Stan