Need Help with finding a part.

[Wooden Hot Rodder Garage]

I have a 14" Summit Band-saw that my Daughter ran over with my wife's new car. The car is fine. The band-saw needs a new surface table? The part that the material is placed on and pushed through the blade. The mounting bracket on the back side broke off. It is pot metal and cannot be welded. Any Ideas where I can locate one of these? http://www.garagejournal.com/forum/attachment.php?attachmentid=446087&stc=1&d=1432614141

 

[Wooden Hot Rodder Garage]

More Photos

http://www.garagejournal.com/forum/...nt.php?attachmentid=446096&stc=1&d=1432616503

It is just the bracket that broke off. I need to locate a set to replace them and secure the table to the saw again. Any help would be much appreciated. It's a 25 year old saw but I would like to save it.

 

[foodgroup]

More Photos

http://www.garagejournal.com/forum/...nt.php?attachmentid=446096&stc=1&d=1432616503

It is just the bracket that broke off. I need to locate a set to replace them and secure the table to the saw again. Any help would be much appreciated. It's a 25 year old saw but I would like to save it.

The broken part is called a trunnion, to help your search.

Many Taiwan/China saws share the same dimensions as the Delta and replacements are available on ebay and elsewhere.

For example:

http://www.ebay.com/itm/Delta-14-bandsaw-rear-trunnion-426-02-0-950-0002-or-LBS-60/111019161635

http://www.ebay.com/itm/Delta-14-ba...26-02-395-0005-with-degree-scale/111031968907

Good luck. Measure first.

 

[foodgroup]

Or like ducksface says, repair it.

It looks like this guy has your saw and fixed his:

http://lumberjocks.com/topics/5090

 

[altersaddle]

That's called the trunnion, and it tends to be a weak point. I fabricated one out of 1/8" plate for a little Craftsman three wheeler. If you can't source a replacement, a new one can be made out of steel, or wood.

You can also replace it with angle iron or a block and give up the table tilting option.

 

[Wooden Hot Rodder Garage]

THANKS FOOD GROUP , ebay had just what I needed.

 

[Wooden Hot Rodder Garage]

Parts came in and the saw is good as new. AWESOME!!!