Need LED lights

[SMOKEEATERFF]

I’m looking to install some led lights in my new shop. I had some 4 ft 2 bulb led lights in m old shop and was really pleased with them. I checked the calculations and I would need appx 24 for the new shop. I’m trying to cut down on all the wiring. The shop is a 30x48x12, it will have white metal ceilings and walls. It will be used for maintenance, some assembly, wood and metal working and have a 2 post lift. I am looking at these...

http://www.ledlightingwholesaleinc.com/EV-U150W-p/ev-u150w.htm

https://www.amazon.com/gp/aw/d/B071...dpPl=1&dpID=51j5am1nAtL&ref=plSrch&th=1&psc=1

I was thinking of getting 7 of these to cut down on all of the wiring. Good/bad idea?

 

[Platonic Solid]

First link goes nowhere for me. Either way suggest looking at the post #14 fixture in this thread. (link)

 

[SMOKEEATERFF]

Weird, their entire website is down.

 

[SMOKEEATERFF]

How many of the ones you linked do you recommend?

 

[Platonic Solid]

30x48x12

15 fixtures
30x48, 3x5 arrangement, 10ft x 9'7" fixture spacing
Yield 85fc @ 30" workplane
1200W Total

 

[white 450]

@smokeeaterff I just ordered 22 of the same fixtures linked to you for my 30x60x12. Assuming the quality is fine this is a very good deal on diffused lens 2' fixture. It will probably be 2-3 weeks before mine are installed but I will try to come back to one of the threads referencing them and post my opinion.

 

[SMOKEEATERFF]

@smokeeaterff I just ordered 22 of the same fixtures linked to you for my 30x60x12. Assuming the quality is fine this is a very good deal on diffused lens 2' fixture. It will probably be 2-3 weeks before mine are installed but I will try to come back to one of the threads referencing them and post my opinion.

Please do. It’ll be a few weeks before I order. Hoping they get my metal up on the outside pretty quick. I want to get the floor done and then insulate the walls. Trying to decide on how to do my electrical. Either exposed conduit or behind the metal panels. Any advice there?

 

[white 450]

Please do. It’ll be a few weeks before I order. Hoping they get my metal up on the outside pretty quick. I want to get the floor done and then insulate the walls. Trying to decide on how to do my electrical. Either exposed conduit or behind the metal panels. Any advice there?

Mine's stick framed so I'm just running everything through the studs and over the trusses with drywall covering it up. I've been working my tail off prepping the concrete for epoxy because we have a few days next week in the high 50's low 60's.

 

[SMOKEEATERFF]

Link is back working. Apparently their site crashed.

 

[cory58]

Isn't a 12 foot ceiling height a little low for high bay fixtures? With mounting, the bottom of the fixture will be at 11'-11.5'.

Cory

 

[Platonic Solid]

The word High Bay is used rather liberally. At 10,400 Lumens I think the term Low Bay is more applicable.