SINISTER
Well-known member
My name is Charlie. I work right now as a construction manager and part time as a master tech at one of the largest non dealer public/retail automotive shops in LI. Not going to go into any detail on the names of my companys.
I started my career as a hoist mechanic/constructor/journeyman.
Currently I have more hobbies that I can count.
I am building a 85 camaro, resto-mod. Its viper red, 355ci sbc 9.58:1 compression ratio, Forged internals, comp cam 108lsa 480lift, Mighty demon 750 carb, full msd ign. Borg warner rebuild 5spd, 3.73:1 gears, corvette wheels, Interior is fully restored, all autometer gauges, 6pt roll bar, corbeau seats. Never finished.
I have a 07' seadoo challenger jet boat SC. If you cant tell from the first post I can keep my hands clean. Its got solas prop, K&N CAI, Autometer boost gauge. LED underwater floodlights, led interior lights, custom made wake tower speakers, wet sounds free air woofer, JL 1000W 4ch marine amp.
Those are the extent of my power sports.
I also have a '12 Specialized hardrock disc, I enjoy riding and upgrading. Avid bb7 disc brakes F/R, Flow saddle, Eason low rise carbon bars, 100mm Rockshox solo air Recon GLD RL shocks w/ remote lockout, and xpedo face off pedals.
I like to build my computers as well. My current setup is MSi Motherboard, AM3+ AMDFX-6100 4.1Ghz, Corsair 16G DDR3, Dual 500gb Seagate Momentus hybrid drives RAID-0 setup. 80G SSD boot drive. ATI radeon 6970, 700W Cooler-master eXtreme PSU.
This is a garage forum so you probably would like to know about my tools...
Wrenches- All Snap-on & Williams Cman PRO
Ratchets- Snap-On only (no soft grips here)
Breaker bars- Proto and Snap on(soft grip)
Sockets - 1/4"(Cman laser etched) 3/8" (Cman LE) 1/2" (snap-on Impact, Proto, Williams ) All in deep/shallow 6pt and 12pt
Hex&Torx- Snap-On sets in 1/4", 3/8" and 1/2" impact, Neiko master sets.
Pliers- All ChannelLock and Knipex(cobras are my fav.)
Electrical- Fluke Multimeter, Power Probe III master set.
Pry-Bars- Mayhew Dominators 48" 36" 31" 25" Asst pry screwdrivers
ScrewDrivers- Matco set only
Air tools- Impact guns(1/2" IR thunder gun, 1/2" IR Ti) IR 1/2"&1/4" air ratchet, Jet tools Cutoff, and angle die grinder. CP 714 air hammer. IR 1/2 Drill
Cordless- Millwakee 18v Lion drill/driver, Cman NEXTEC impact driver
GearWrenches- Stubby comb. and XL 9mm-25mm
Welders: HF 220V 110Amp MIG, Millermatic 140 mig. 60 argon/co2
Paint Guns: Sharpe FX1000 1.3/1.4, DeVilbiss 1.4/1.8, HF purple 1.5
AirCompressors: Custom built 60G horizontal tank 13.1CFM@90 belt driven. 1/2" hose, Porter cable 6G portable.
Tons of asst I am missing but this is the bulk. Not including specialty service tools.
Thats all for now figured I would give you all lots of info, Pretty bored here right now....Sry I dont have more pics!
I started my career as a hoist mechanic/constructor/journeyman.
Currently I have more hobbies that I can count.
I am building a 85 camaro, resto-mod. Its viper red, 355ci sbc 9.58:1 compression ratio, Forged internals, comp cam 108lsa 480lift, Mighty demon 750 carb, full msd ign. Borg warner rebuild 5spd, 3.73:1 gears, corvette wheels, Interior is fully restored, all autometer gauges, 6pt roll bar, corbeau seats. Never finished.
I have a 07' seadoo challenger jet boat SC. If you cant tell from the first post I can keep my hands clean. Its got solas prop, K&N CAI, Autometer boost gauge. LED underwater floodlights, led interior lights, custom made wake tower speakers, wet sounds free air woofer, JL 1000W 4ch marine amp.
Those are the extent of my power sports.
I also have a '12 Specialized hardrock disc, I enjoy riding and upgrading. Avid bb7 disc brakes F/R, Flow saddle, Eason low rise carbon bars, 100mm Rockshox solo air Recon GLD RL shocks w/ remote lockout, and xpedo face off pedals.
I like to build my computers as well. My current setup is MSi Motherboard, AM3+ AMDFX-6100 4.1Ghz, Corsair 16G DDR3, Dual 500gb Seagate Momentus hybrid drives RAID-0 setup. 80G SSD boot drive. ATI radeon 6970, 700W Cooler-master eXtreme PSU.
This is a garage forum so you probably would like to know about my tools...
Wrenches- All Snap-on & Williams Cman PRO
Ratchets- Snap-On only (no soft grips here)
Breaker bars- Proto and Snap on(soft grip)
Sockets - 1/4"(Cman laser etched) 3/8" (Cman LE) 1/2" (snap-on Impact, Proto, Williams ) All in deep/shallow 6pt and 12pt
Hex&Torx- Snap-On sets in 1/4", 3/8" and 1/2" impact, Neiko master sets.
Pliers- All ChannelLock and Knipex(cobras are my fav.)
Electrical- Fluke Multimeter, Power Probe III master set.
Pry-Bars- Mayhew Dominators 48" 36" 31" 25" Asst pry screwdrivers
ScrewDrivers- Matco set only
Air tools- Impact guns(1/2" IR thunder gun, 1/2" IR Ti) IR 1/2"&1/4" air ratchet, Jet tools Cutoff, and angle die grinder. CP 714 air hammer. IR 1/2 Drill
Cordless- Millwakee 18v Lion drill/driver, Cman NEXTEC impact driver
GearWrenches- Stubby comb. and XL 9mm-25mm
Welders: HF 220V 110Amp MIG, Millermatic 140 mig. 60 argon/co2
Paint Guns: Sharpe FX1000 1.3/1.4, DeVilbiss 1.4/1.8, HF purple 1.5
AirCompressors: Custom built 60G horizontal tank 13.1CFM@90 belt driven. 1/2" hose, Porter cable 6G portable.
Tons of asst I am missing but this is the bulk. Not including specialty service tools.
Thats all for now figured I would give you all lots of info, Pretty bored here right now....Sry I dont have more pics!