To avoid these ads, REGISTER NOW!

New lights installed

Kevin54

MEMBER EMERITUS
Joined
Jan 12, 2005
Messages
29,341
Location
Urbana, Ohio
I did have the cheap contractors pack of incadescent lighting in the garage and it was never bright even with 14 of them. Lowes had 4' lights on sale along with bulbs on sale, so I picked up a few. I had to add plugs to all of the boxes but what a difference it makes. I don't really care for the cords but I may shorten them up so there is not a huge bundle hanging on top of the lights. All in all for around $200 I don't think I did too bad.

dscf2754ox8.th.jpg

dscf2755vo3.jpg

dscf2757ql6.jpg

dscf2758xb5.jpg

dscf2754yg8.jpg
 
Last edited:
To avoid these ads, REGISTER NOW!

akdiesel

Well-known member
Joined
Aug 8, 2008
Messages
2,617
Location
Wasilla, AK
You got a lot of light in there. Not a bad find at Lowes.

How do you like the fans in your shop?
I don't live in an area that gets hot but air circulation woud be nice for fumes/smoke.
 

uparms

Well-known member
Joined
Sep 10, 2008
Messages
65
Location
Delaware, USA
I really like the width / spread of the light spacing. Consistant no matter where you are working.

Nice job!
 

kbs2244

Well-known member
Joined
Nov 11, 2006
Messages
14,065
I like it!
Lights.
White walls and celing.
Air circulation.
All my hot spots.
Nice place.
 
To avoid these ads, REGISTER NOW!
OP
K

Kevin54

MEMBER EMERITUS
Joined
Jan 12, 2005
Messages
29,341
Location
Urbana, Ohio
How do you like the fans in your shop?

I lke the fans real well. Not fond of the cheap brass look though, but I have had them since I built the garage 7 years ago and they run all of the time. I reverse them for winter to circulate the heat. If you notice the closet to the left in one ppicture, it houses a furnace that is a downdraft furnace. Four registers under the furnace blow out across the floor. So the fans help pull some of that air up and wash it back down the walls. In the summer it makes it noce as the fans are right above the engine bay of a car.
 

67pete300

Well-known member
Joined
Jun 15, 2008
Messages
342
Location
East Lyme, CT
You have so many outlets! Did you have to add them all for the lights? In the walls too. I am jealous of all your electricity...
 
OP
K

Kevin54

MEMBER EMERITUS
Joined
Jan 12, 2005
Messages
29,341
Location
Urbana, Ohio
You have so many outlets! Did you have to add them all for the lights? In the walls too. I am jealous of all your electricity...

The lights were originally wired for the basic Contractor pack lights. The kind that have a brass base and use a 60 watt incadescent. I had to change the lights out for outlets seeing that the fluorescents had plugs. I have all of the ceiling lights wired on two circuits. One circuit for the center 6 lights and the other circuit for the outer 6 lights. Wall outlets are broke down on two seperate circuits. 1 1/2 walls on one circuit and the other 1 1/2 walls on another. Everything wire with 12/2 w/g. Most of the time only one or the other bank of lights is on at any time. But yes...as far as outlets, when you're running wire down a wall it only cost another couple of dollars to add another outlet. It just makes for a pain to drywall around everything.:bounce:
 

alkemyst

Well-known member
Joined
Feb 10, 2008
Messages
279
Awesome...I had one of those type lights dead center with a 24" florescent above part of the workbench. At night it was unusable.

I picked up four 4' two bulb setups and it's so much better.

While ceiling plugs were probably a bit of extra work, they are sort of nice to have. You can always use an extra outlet sometimes and having one overhead in a garage is nice.

When I get a space I can pull a car into I am going to put in overhead power with a loom at each outlet to wrap the cord once prior to plugging in.
 
To avoid these ads, REGISTER NOW!
Top Bottom