SouthernMercantile
Active member
- Location
- E. TN
EVEN THO I HAVE RELOCATED STILL HAD A DAY OR TWO TO GRAB THESE.
HOPEFULLY WE CAN PUT THE PHOTO WITH EACH ITEM. PRICES LISTED WITH ITEM ARE SIMPLY THE NEW RETAIL PRICE SO PLEASE FEEL FREE TO SEND ME A MESSAGE WITH AN HONEST OFFER.
GENERALLY SPEAKING OF THESE SOCKETS, MANY HAVE GRIND MARKS WHERE THEY WERE OVERLY EXUBERANT IN REMOVING THE OLD TOOL ID'S. IF YOU ARE PURCHASING JUST ONE, THE 1ST BUYER WILL ALWAYS GET THE BEST ONE, IF I HAVE MORE THAN ONE. OK HERE WE GO
#1)(2EA) 1/4" DR X 1/2 " SOCKET SWIVEL 12 PT, TMU161 RETAIL $39.50
#2)3/8" DR 11" EXTENSION FXK11 RETAIL $32.00
#3)(3 EA) 1/4" DR X 3/16" DEEP WELL STMD6 RETAIL 18.35
#4) (2 EA) 1/4" #8 - 1/4 HEX SPLINE TEL8 SOME CHROME COMING OFF BOTH THESE RETAIL $42.25
#5) (1 EA) 1/4" X 3/8" SWIVEL 12PT SOCKET TMU121A RETAIL $38.75
#6) (2EA) 1/4" X 9/16" 12 PT DEEP WELL STMD18 RETAIL $18.35
#7) (8EA, 1 HAS THE END BEVELED) 1/4" X 5/16" DEEP WELL STMD10 RETAIL $18.10
#8) (4EA) 1/4" X 7/32" DEEP WELL STMD7 RETAIL $18.35
#9) (4 EA) 1/4" X 1/4" 12PT DEEP WELL INDUSTRIAL(IMPACT TYPE) GSTMD8 RETAIL $11.45
#10) ( AT LEAST 20 EA) 1/4" X 1/4" 12 PT DEEP WELL STMD8 RETAIL $18.10
#11) (1 EA) 1/4" X 9/32) 12 PT DEEP WELL STMD9 RETAIL $18.35
#12) (1EA) 1/4" X 3/8" 12 PT DEEP WELL STMD12 RETAIL $18.35
#13) (3EA) 1/4 X 7/16" 12 PT SWIVEL TMU141 RETAIL $38.75
#14) (1 EA) 1/4" X 5/16" 12 PT DEEP WELL STMD10 RETAIL $18.10
#15) (2 EA) 1/4" X 11/32" 12 PT DEEP WELL STMD11, BOTH OF THESE HAVE GRIND MARKS FROM TOOL ID REMOVAL RETAIL $18.35
#16) (1 EA) 3/8" X 5/16" 12 PT DEEP WELL SF101 RETAIL $18.40
#17) A SMALL "SET" OF 1/4 INCH SWIVEL SHORT SOCKETS, INCLUDING 2 SPLINED, SIZES INCLUDED 9/16,1/2, 7/16, 3/8, 5/16, 11/32, 1/4, 7/32. PART NUMBERS AND RETAIL TMU181 - $39.75, TMU161 $39.50, TMU141 -- $38.75, TMU121A -- $38.75, TESU10 (5/16) SPLINED -$80.55, TMU11 -- 38.75, 1/4" IS A HI PERFORMANCE P# TDHU81A --$80.55, TMU71A -- $37.25. SELLING THESE AS A SET, TOTAL RETAIL FOR THEM IS $393.85
LASTLY I HAVE A HUGE QUANTITY OF NUMERICAL DRILL BITS FROM AN AVIATION CENTER, THESE ALSO ARE GOOD FOR THE GARAGE MECH AND OTHER SINCE THEY ARE VERY CLOSE MOSTLY IN SIZE TO FRACTIONAL BITS.
I SELL THESE IN QTY'S OF 10,25,50 OR 100 EA. THESE ARE ALL NEW JUST REPACKAGED SINCE THEY WERE EXCESSED. I CHECK EACH BIT TO MAKE SURE IT ISNT BROKEN BENT OR OTHERWISE UNUSABLE. I HAVE BEEN SELLING THESE VERY QUICKLY ON EbAY AND THOUGHT I'D OFFER THEM HERE ALSO. SIZES ARE #40-- .098", #30 -- .128, SLIGHT OVER SIZED TO A 1/8TH, #27 --.144, RIGHT AROUND A 9/64, #21 -- .159, JUST OVER A 5/32, #10 -- .193 JUST OVER A 3/16TH, AND THE OBVIOUS 1/4" BITS. THESE BRAND NEW RUN FROM $1.05 EA TO $2.50 EA FOR THE 1/4". IN QUANTITY OF 10 MY PRICE IS 33% OF NEW, THATS 2/3RDS OFF RETAIL. IF YOUR INTERESTED MESSAGE ME FOR A QUOTE.
THE SEMIRETIRED AVTECH IS HAPPY TO BE BACK AND MORE OFFERS COMING. BTW I HAVE ABOUT 3200LBS OF TOOLS AND DRILL BITS SO ASK ME IF THERE IS SOMETHING YOUR LOOKING FOR.
WILL TRY TO ADD PHOTOS TOMORROW OR SAT....ANYTHING IS TOTALLY OPEN TO YOU MAKING AN OFFER ON A TOOL YOU DESIRE. (I dont bite and often accept a fair and or reasonable offer)
***couldnt upload pics so please message or email and I'll [email protected] thanks for looking
HOPEFULLY WE CAN PUT THE PHOTO WITH EACH ITEM. PRICES LISTED WITH ITEM ARE SIMPLY THE NEW RETAIL PRICE SO PLEASE FEEL FREE TO SEND ME A MESSAGE WITH AN HONEST OFFER.
GENERALLY SPEAKING OF THESE SOCKETS, MANY HAVE GRIND MARKS WHERE THEY WERE OVERLY EXUBERANT IN REMOVING THE OLD TOOL ID'S. IF YOU ARE PURCHASING JUST ONE, THE 1ST BUYER WILL ALWAYS GET THE BEST ONE, IF I HAVE MORE THAN ONE. OK HERE WE GO
#1)(2EA) 1/4" DR X 1/2 " SOCKET SWIVEL 12 PT, TMU161 RETAIL $39.50
#2)3/8" DR 11" EXTENSION FXK11 RETAIL $32.00
#3)(3 EA) 1/4" DR X 3/16" DEEP WELL STMD6 RETAIL 18.35
#4) (2 EA) 1/4" #8 - 1/4 HEX SPLINE TEL8 SOME CHROME COMING OFF BOTH THESE RETAIL $42.25
#5) (1 EA) 1/4" X 3/8" SWIVEL 12PT SOCKET TMU121A RETAIL $38.75
#6) (2EA) 1/4" X 9/16" 12 PT DEEP WELL STMD18 RETAIL $18.35
#7) (8EA, 1 HAS THE END BEVELED) 1/4" X 5/16" DEEP WELL STMD10 RETAIL $18.10
#8) (4EA) 1/4" X 7/32" DEEP WELL STMD7 RETAIL $18.35
#9) (4 EA) 1/4" X 1/4" 12PT DEEP WELL INDUSTRIAL(IMPACT TYPE) GSTMD8 RETAIL $11.45
#10) ( AT LEAST 20 EA) 1/4" X 1/4" 12 PT DEEP WELL STMD8 RETAIL $18.10
#11) (1 EA) 1/4" X 9/32) 12 PT DEEP WELL STMD9 RETAIL $18.35
#12) (1EA) 1/4" X 3/8" 12 PT DEEP WELL STMD12 RETAIL $18.35
#13) (3EA) 1/4 X 7/16" 12 PT SWIVEL TMU141 RETAIL $38.75
#14) (1 EA) 1/4" X 5/16" 12 PT DEEP WELL STMD10 RETAIL $18.10
#15) (2 EA) 1/4" X 11/32" 12 PT DEEP WELL STMD11, BOTH OF THESE HAVE GRIND MARKS FROM TOOL ID REMOVAL RETAIL $18.35
#16) (1 EA) 3/8" X 5/16" 12 PT DEEP WELL SF101 RETAIL $18.40
#17) A SMALL "SET" OF 1/4 INCH SWIVEL SHORT SOCKETS, INCLUDING 2 SPLINED, SIZES INCLUDED 9/16,1/2, 7/16, 3/8, 5/16, 11/32, 1/4, 7/32. PART NUMBERS AND RETAIL TMU181 - $39.75, TMU161 $39.50, TMU141 -- $38.75, TMU121A -- $38.75, TESU10 (5/16) SPLINED -$80.55, TMU11 -- 38.75, 1/4" IS A HI PERFORMANCE P# TDHU81A --$80.55, TMU71A -- $37.25. SELLING THESE AS A SET, TOTAL RETAIL FOR THEM IS $393.85
LASTLY I HAVE A HUGE QUANTITY OF NUMERICAL DRILL BITS FROM AN AVIATION CENTER, THESE ALSO ARE GOOD FOR THE GARAGE MECH AND OTHER SINCE THEY ARE VERY CLOSE MOSTLY IN SIZE TO FRACTIONAL BITS.
I SELL THESE IN QTY'S OF 10,25,50 OR 100 EA. THESE ARE ALL NEW JUST REPACKAGED SINCE THEY WERE EXCESSED. I CHECK EACH BIT TO MAKE SURE IT ISNT BROKEN BENT OR OTHERWISE UNUSABLE. I HAVE BEEN SELLING THESE VERY QUICKLY ON EbAY AND THOUGHT I'D OFFER THEM HERE ALSO. SIZES ARE #40-- .098", #30 -- .128, SLIGHT OVER SIZED TO A 1/8TH, #27 --.144, RIGHT AROUND A 9/64, #21 -- .159, JUST OVER A 5/32, #10 -- .193 JUST OVER A 3/16TH, AND THE OBVIOUS 1/4" BITS. THESE BRAND NEW RUN FROM $1.05 EA TO $2.50 EA FOR THE 1/4". IN QUANTITY OF 10 MY PRICE IS 33% OF NEW, THATS 2/3RDS OFF RETAIL. IF YOUR INTERESTED MESSAGE ME FOR A QUOTE.
THE SEMIRETIRED AVTECH IS HAPPY TO BE BACK AND MORE OFFERS COMING. BTW I HAVE ABOUT 3200LBS OF TOOLS AND DRILL BITS SO ASK ME IF THERE IS SOMETHING YOUR LOOKING FOR.
WILL TRY TO ADD PHOTOS TOMORROW OR SAT....ANYTHING IS TOTALLY OPEN TO YOU MAKING AN OFFER ON A TOOL YOU DESIRE. (I dont bite and often accept a fair and or reasonable offer)
***couldnt upload pics so please message or email and I'll [email protected] thanks for looking
Last edited: