New member from Canada

[Doyle Osborne]

Hi a quick post to say Hi and introduce my project.
Iv'e been rebuilding cars and trucks for 40+ years everything from Triumph sports cars to Altered drag cars. Alot of trucks but none as original as my current project.
Most of the interior has been cleaned and repainted, some stress cracks around the gauges are next to weld and grind down for paint. Iv'e got door crease dents from over extension that is getting close for me to try my hand at repairing hopefully without doing a panel replace. This is where I will be looking for advice on metal working hope someone on her can help out.
Thanks again for the opportunity.

Doyle

1950 Chevrolet 5 Window 1 ton
http://s1281.photobucket.com/user/doyleosborne/library/1950 Chevrolet 1 Ton

 

[drivesitfar]

Doyle: not the best place to ask questions in the intro thread. there are plenty of talented welders on this forum and if you do some reading on threads you'll find out soon which ones they are. ask the same questions and post up the actual pictures instead of a link and you might get quick helpful answers.

welcome to the group and almost sounds like you don't need much help and probably will help us more.

cheers

 

[1/2 Cup]

Hello and welcome to the forum Doyle, there is plenty of help and assistance on the forum, enjoy..

 

[ADSR]

Welcome!

 

[930dreamer]

Welcome to the GJ.

 

[rburke65]

Hello Doyle and welcome from Ohio!

 

[Doyle Osborne]

Thanks for the comments and yes I will be asking questions in the correct forum. I'm a member of the Stovebolt forum and have asked and received a ton of advice from the resident experts there, additional advice and other solutions to problems or issues are always helpful.