New Plier Rack

[SASORacing]

I'd not like but love a set! Let me know please! And go usa cottage made gear!

 

[ServerSage]

I'll take a set in black. Only trouble is timing, I'm moving to the UK in 40 days. I'm in Northern California, any chance of getting them before then?

Thanks Matt, they look fantastic!

 

[NotSoSimple]

Im in for a black unit if you are still powder coating them in black. PayPal ready.

 

[mrvm]

Matt put me in for one black set please

 

[texasfiremedic]

Any word on green racks yet?

 

[BellyUpFish]

Woot!

 

[[email protected]]

Where are you at as far as shipping goes? The longer I stare at the plier racks the antsier I get!

 

[k-os]

Got mine swapped over earlier this week. Had to cut one spot off of each in order to get two of them to fit side by side in my HF 44" large drawer. The white wire on the right is what I replaced, just some home-made racks made from wire shelving.

 

[matts65ss]

Hey everyone. Sorry haven't been on the forum in a few days I've been sick and swamped at work and have taken this week off work for some family time. I will return to town on Monday and will be sending out payment pms to batch 9 10 and 11. Thanks for your patience!

Matt

 

[bullitt67]

Matt, any idea on when your starting the colored batches? I'd be interested in an orange set!

 

[mtwaterguy]

PM'd for two in black. Thanks, Mike.

 

[antid2]

i'd be down for a lime green set

 

[cwlo]

I'm also up for 2 green sets.

Chris

 

[fireeqpsrv]

Has anyone used these in the HF 44 in bottom box drawers? It they fit I plan on ordering a couple.

 

[littlered70]

I would like a set. Thanks Scott

 

[cagullett1]

Got mine swapped over earlier this week. Had to cut one spot off of each in order to get two of them to fit side by side in my HF 44" large drawer. The white wire on the right is what I replaced, just some home-made racks made from wire shelving.

Has anyone used these in the HF 44 in bottom box drawers? It they fit I plan on ordering a couple.

6 posts above yours is a picture of 2 sets used in a drawer on the HF44 box. I have a set as well and they fit great.

 

[fireeqpsrv]

6 posts above yours is a picture of 2 sets used in a drawer on the HF44 box. I have a set as well and they fit great.

Sorry I was photo blinded and did not notice that.

 

[fireeqpsrv]

Put me down for 3 sets color does not matter all the same multi not an issue.

 

[rmalkow2]

Matt,
I saw your racks on another GJ post and they look exactly what I need. I would like to order one set so please PM me when ready and I'll do the PayPal thing as you specify.

Thanks,
Bob

 

[iahsatcs]

Payment sent for the 4 red racks.

Scott

 

[Zippercat]

Got mine! Very happy; excellent product. Thanks again Matt!

 

[diggerdanh]

Matt, I'm so happy with the set that I got that I want to order a set for my Dad too. Put me down for a set of black or red, whichever you get to first.

Also, if you're already tracking a list for wrench racks then put me down for a set on that list too!

Thanks,
Dan

 

[fireeqpsrv]

I would love to see the wrench racks.

 

[internetdude]

I'm thinking about 2 sets, I messaged you.

 

[longezo320]

Matt,

Did you get the PMs sent for #11? If so, I did not receive one.

Sam

 

[mdr]

Matt,
Did you get the PMs sent for #11? If so, I did not receive one.
Sam

Ditto for me - would like to pay as well. Murray

 

[Steve in Louisiana]

I see nothing from Matt for almost 10 days . . . is he still making racks . . .

Anyone know if he is OK, he was sick . . .:-(

Steve

 

[matts65ss]

Hey everyone! Sorry for the delay. I'm fine and trust me making as many racks as possible. Everyone that I have sent payment messages too has paid. So thank you. July has been insane I had a little scare at the doctors but I am happy to say that I am back in full force and 100 percent healthy. I apologize for missing any pms. Batch 9 is the last batch to get payment messages. Batch 10 and 11 are still at powdercoating. As soon as I receive them you guys will have messages!

Thanks for the support and concern!

Matt

 

[gipraw]

Thanks for the update, Matt. Take care of your health.

 

[harleybuilder]

Did someone say " wrench racks" , I'd buy a couple of sets of them. I have a set of the plier racks and they're great.

 

[internetdude]

I just PM'd you a few days ago about shipping to Canada. Was just wondering what color will the next batch be?

 

[Shootingdad2]

hey Matt i was on batch 9 did not receive pm I thought I was on batch 9

Dennis

 

[Shootingdad2]

Batch 9
1. Gearhead1
2. Passinthru
3. Passinthru
4. Nick Danger
5. Shootingdad2
6. Shootingdad2
7. Plex
8. Plex
9. HICKS
10. Mdr

Sent from my SCH-I545 using Tapatalk

looks like I am 5/6 on batch 9

 

[BellyUpFish]

Did someone say " wrench racks" , I'd buy a couple of sets of them. I have a set of the plier racks and they're great.

I'd be all over some wrench racks..

 

[passinthru]

Matt, looks like I was on batch 9 also.
I didn't receive a pm either.

Tim

 

[matts65ss]

My mistake guys. Batch 8 has shipped and 9 and 10 are at powder! Been a long one let me tell ya! Anyways they are scheduled back early next week the moment I receive them pms will be going out!

 

[MrJason]

My mistake guys. Batch 8 has shipped and 9 and 10 are at powder! Been a long one let me tell ya! Anyways they are scheduled back early next week the moment I receive them pms will be going out!

I know it can't be easy to keep up with demand, but I do appreciate the hard work.

Jason

 

[internetdude]

Matt, I'm in for whenever you get back to me by PM.

Great racks Matt, but I would like to put out a suggestion here to the community to have one thread on these racks strictly to be used for ordering purposes, and then keep this thread as a discussion thread (post pics, discuss colors, pre-sales questions, etc.). I know you're busy and it must be a nightmare keeping this all organized, and if people only posted in the order thread if they wanted one, you could probably keep tabs on everything easier. What do you think?

 

[Shootingdad2]

Thats cool Matt, thought maybe my PM messed up. Had a little trouble last week with messages. I just had to dig back and make sure I was on 9.

Thanks for your quick response to question!

 

[matts65ss]

Matt, I'm in for whenever you get back to me by PM.

Great racks Matt, but I would like to put out a suggestion here to the community to have one thread on these racks strictly to be used for ordering purposes, and then keep this thread as a discussion thread (post pics, discuss colors, etc.). I know you're busy and it must be a nightmare keeping this all organized, and if people only posted in the order thread if they wanted one, you could probably keep tabs on everything easier. What do you think?

That is a great idea as soon as I get caught up in the next 2 weeks with the khaos I've created haha I will be doing that
Thanks!

Thats cool Matt, thought maybe my PM messed up. Had a little trouble last week with messages. I just had to dig back and make sure I was on 9.

Thanks for your quick response to question!

Ya same here i actually had to send out pms to people on batch 6 7 and 8 three times for everyone to actually receive them!