internetdude
Well-known member
- Joined
- Aug 27, 2009
- Messages
- 207
Matt, is there a way you could run off a batch of say, 20, instead of 10? Might make it easier to get caught up 
New Plier Rack
- Thread starter matts65ss
- Start date
Check out batch 12 a few pages back has 25 people on it hahaMatt, is there a way you could run off a batch of say, 20, instead of 10? Might make it easier to get caught up
internetdude
Well-known member
- Joined
- Aug 27, 2009
- Messages
- 207
Oh, OK I just saw on the last page that batch 9 had 10 folks. I have no idea what batch you're on and when you'll get to mine. I'll just be patient now.
Do you do colors yet? I'm thinking red like SnapOn or a silver would be nice. But, I'd be OK with black. See why you really need an order thread? LOL
Do you do colors yet? I'm thinking red like SnapOn or a silver would be nice. But, I'd be OK with black. See why you really need an order thread? LOL
EXACTLY! My plan is that when I finish these orders I am going to stock product in black and multiple other colors that way there will be no waiting and I can ship same day orders
BellyUpFish
Well-known member
Matt - any possibility of wrench racks as well?
internetdude
Well-known member
- Joined
- Aug 27, 2009
- Messages
- 207
Awesome!
If only it was your equipment you could go the entrepreneur route, start building products, sell 'em online, get 'em in stores and let the cash roll in, do it full time
PelicanPines
ALLIANCE MEMBER
And then there will be wrench racks !!!!
duster harry
Member
- Joined
- Jun 11, 2011
- Messages
- 5
--------------------------------------------------------------------------------
Thanks for the update, Matt. Take care.
Thanks for the update, Matt. Take care.
The talk of wrench racks all started with a rumor thanks to the gentleman below haha
But due to intrest there WILL be wrench racks coming hahaha [emoji2]
IFMJohn
Well-known member
I can't wait to see what you come up for the wench racks!
Travisnd
Well-known member
THIS!!!vv
I think I'd have to buy a whole set of channellocks just to fill it lol
Sent from my iPhone using Tapatalk
illmatyk
Well-known member
Does this come as a set of two?
Yes it does check out the first post it has all the specifications
illmatyk
Well-known member
Would you ship to Guam 96929?
Rickster55
Well-known member
If you are still taking orders, please include me. I prefer to help out by purchasing "Made in the USA" over "Imported" any day!
PelicanPines
ALLIANCE MEMBER
After putting my pliers in Matts rack (1st ship batch)... all i thought about for days was sticking my wrenches in his rack. Matt has a wonderful rack(s).
I had to retype that above line several times to get it past the moderators.
MrJason
Well-known member
Post of the week. [emoji115]
Flathead Red
Well-known member
I would like one set in black if there are any available
Red
Sent from my iPad using Tapatalk
Red
Sent from my iPad using Tapatalk
[email protected]
Member
How you doing as shipments?
Matt, reports of massive plier pile up at my cave. Drawers are bursting at the seams from the mountains of disorganized plier chaos. Reds appear to be Knipex and blues should be Channellock. SOS
Just kidding, need a black set....
Just kidding, need a black set....
What's up everyone. Figured I would post up with an update. I'll start with saying please don't give up on me haha work is as busy as its ever been in the 6 years I've been here. I'm working five 10 hour days and then an 8 hour day on Saturdays currently. All machines have setups that I cannot change right now to produce the racks. Work load ends next week so as soon as we finish up this production run. Plier racks will be back in production! Sorry for the delay! PLIER RACKS WILL BE MADE I PROMISE!
Thanks for 7 understanding everyone.
Matt
Thanks for 7 understanding everyone.
Matt
Steve in Louisiana
MEMBER EMERITUS
- Joined
- Aug 9, 2012
- Messages
- 76
Sounds good Matt . . . I'm sure everyone here works for someone & they all understand "acceptable, but under the radar projects". Take your time and don't appear to push or jealousy & envy on the part of @ least one co-worker could cost you access to equipment. We can wait . . .
Be happy that your employer has a lot of work . . . or you may end up making plier racks with a couple pair of side cutters. . .
Steve
Last edited:
rmalkow2
Well-known member
No problem waiting Matt. You sound like a very busy guy and good things are worth the wait.
justme-
Well-known member
We all understand Matt - my boss seems to throw important projects in my lap last minute when he knows I'm saddled with multiple other important ones. 2.5 hours late tonight because of one of those today in fact.
Glad you're company is so busy - in times like these it's a good thing to see. My Craftsmans and channel locks will have to intermingle with the vise grips just a little longer.
Glad you're company is so busy - in times like these it's a good thing to see. My Craftsmans and channel locks will have to intermingle with the vise grips just a little longer.
[email protected]
Member
Hey Matt! . Just wondering if there has been any progress on #11?
Ric
Ric
I hate to say it but not yet. It was another 60 plus hour week for me. As soon as we get through there large quantity orders I will be continuing!
BellyUpFish
Well-known member
Did you ever say if you've considered wrench racks as well?
PelicanPines
ALLIANCE MEMBER
Our hidden spy cameras show Matt is working on a wrench rack design. He has confirmed this in previous posts here. All I can say... it might be my fault.
BellyUpFish
Well-known member
HICKS
Well-known member
Bump.
Steve in Louisiana
MEMBER EMERITUS
- Joined
- Aug 9, 2012
- Messages
- 76
Anyone hear from Matt?
Steve
Steve
[email protected]
Member
I have got answers every time I have had a question. I think Matt is covered with his job and I for one am going let him work out of it.
Steve in Louisiana
MEMBER EMERITUS
- Joined
- Aug 9, 2012
- Messages
- 76
I agree . . . just curious if he had any updates . . . haven't seen anything on this thread for about 3 weeks . .
Steve
charger0926
Well-known member
yeah i was wondering the same thing as i am on the next list and am looking forward to getting this in my tool box asap
let us know whats up matt...please
let us know whats up matt...please
charger0926
Well-known member
im guessing that he is done with these, as there hasnt been any posts for nearly 3 1/2 weeks
Steve in Louisiana
MEMBER EMERITUS
- Joined
- Aug 9, 2012
- Messages
- 76
I have purchased some really nice items from fellows on deals like this. Had a fellow that was making these sweet little vises for a particular woodworking function. Well as the sales picked up so did the interest of his boss since it was the company machine shop he was using. He was on his own time with his own materials, but face it for some reason most employers can't stand it when an employee makes a nickel and he doesn't get a piece of it.
I am thinking that this is what happened here & surely not Matt's fault.
I hope I am wrong . . .
Steve
I am thinking that this is what happened here & surely not Matt's fault.
I hope I am wrong . . .
Steve
Coolabah
Well-known member
yeh - I have no idea of what is happening but I will say this- having /running/whatever your own business on ANY level is tougher on a thousand platforms more than the average Joe might think... just sayin' my 2 cents...
