New to us blast cabinet and slip roller help

[bigpokie]

My friends dad’s work was getting rid of some old equipment so he called my friend to see if he/we wanted any of it. We grabbed a blast cabinet and a slip roller. The blast cabinet is an empire “mh-3040s”. It’s dirty, the foot switch is smashed all the hell, the regulator isn’t working properly,needs a dust bag and the dust collector motor works when in wants too. So the first thing I did was to email empire and I have yet to hear anything. Can anyone one help with literature or any guidance? The slip roller is a, peck stow and Wilcox, model “383-d”. The slip roller we more Than likely sell, the only problem is it is 220, 3ph. So, with this can we change the motor out to a 110? And some pics to help. Thanks in advance.

 

[OccupantRJ]

Check with Rodeco Company in Sanford, NC on your blast cabinet parts. Before I retired, that is where we bought parts.

 

[bigpokie]

Bump

 

[metaleltr]

As far as the blast cabinet is concerned it wouldn't take too much to retrofit it with skat blast parts from tp tools.

The slip roll I would set up a VFD to run the 3 phase motor.